Black phosphorus-based anisotropic absorption structure in the mid-infrared

Tingting Liu,Xiaoyun Jiang,Chaobiao Zhou,Shuyuan Xiao

DOI: https://doi.org/10.1364/OE.27.027618

IF: 3.8

2019-11-25

Optics Express

Abstract:Tingting Liu, Xiaoyun Jiang, Chaobiao Zhou, Shuyuan Xiao Black phosphorus (BP), an emerging two-dimensional (2D) material with intriguing optical properties, forms a promising building block in ... [Opt. Express 27, 27618-27627 (2019)]

optics

What problem does this paper attempt to address?

Rediscovering Black Phosphorus: A Unique Anisotropic 2D Material for Optoelectronics and Electronics

Fengnian Xia,Han Wang,Yichen Jia

DOI: https://doi.org/10.48550/arXiv.1402.0270

2014-02-03

Mesoscale and Nanoscale Physics

Abstract:Anisotropy refers to the property of a material exhibiting directionally dependent features. In this paper, we introduce black phosphorous (BP), the most stable allotrope of phosphorus in layered orthorhombic structure with a bandgap of 0.3 eV in bulk, as a unique 2D material in which electrons, phonons and their interactions with photons behave in a highly anisotropic manner within the plane of the layers. The unique anisotropic nature of BP thin films is revealed using angle-resolved Raman and infrared spectroscopies, together with angle-resolved transport study. For 15 nm thick BP, we measure Hall mobility of 1000 and 600 cm^2/Vs for holes along the light (x) and heavy (y) effective mass directions, respectively, at 120 K. These BP thin films also exhibit large and anisotropic in-plane optical conductivity from 2 to 5 micrometer wavelength. Field effect transistors using 4 to 30 layers of BP (2 to 15 nm) as channel material exhibit an on-off current ratio exceeding 10^5, a field-effect mobility of 205 cm^2/Vs, and good saturation properties all at room temperature, suggesting its promising future in high performance thin film electronics. By introducing narrow bandgap BP into the 2D material family, we fill the space between semi-metallic graphene and large bandgap TMDCs, where great potentials for infrared optoelectronics lie. Most importantly, the unique anisotropic nature of this intriguing material creates unprecedented possibilities for the realization of conceptually new optoelectronic and electronic devices in which angle-dependent physical properties are highly desirable.
Tunable anisotropic absorption in monolayer black phosphorus using critical coupling

Tingting Liu,Xiaoyun Jiang,Huaixing Wang,Yong Liu,Chaobiao Zhou,Shuyuan Xiao

DOI: https://doi.org/10.7567/1882-0786/ab6270

IF: 2.819

2019-12-24

Applied Physics Express

Abstract:We present a monolayer black phosphorus (BP)-based metamaterial structure for tunable anisotropic absorption in the mid-infrared. Based on the critical coupling mechanism of guided resonance, the structure realizes the high absorption efficiency of 99.65% for TM polarization, while only 2.61% at the same wavelength for TE polarization due to the intrinsic anisotropy of BP. The absorption characteristics can be flexibly controlled by changing critical coupling conditions, including the electron doping of BP, geometric parameters and incident angles of light. The results show feasibility in designing high-performance BP-based optoelectronic devices with spectral tunability and polarization selectivity.

physics, applied
Anisotropic perfect absorber based on black phosphorus-graphene

Boshi Wang,Tianyi Wang,Yufang Liu,Kun Yu

DOI: https://doi.org/10.1016/j.cap.2023.10.016

IF: 2.856

2024-01-01

Current Applied Physics

Abstract:Two-dimensional materials have garnered extensive attention in the realm of optical devices due to their unique physical properties. In this paper, we propose a tunable and anisotropic perfect absorber composed of anisotropic black phosphorus (BP) and isotropic graphene. The plasmon resonance of this anisotropic material and isotropic material achieves a strong anisotropic plasma response. The proposed structure demonstrates absorption of 99.73 % and 98.35 % in the x- and y-polarization directions, respectively. By adjusting the geometric parameters and the levels of doping with graphene and BP, the resonance characteristics can be effectively controlled. In addition, the robustness to incident angle and polarization sensitivity is also illustrated. Consequently, our research offers broad prospects for applications in polarization-selective and tunable high-performance devices, such as polarizers, modulators, and mid-infrared spectral imaging.

physics, applied,materials science, multidisciplinary
Tunable anisotropic perfect absorption in hyperbolic metamaterials based on black phosphorous/dielectric multilayer structures

Shuyuan Xiao,Tingting Liu,Le Cheng,Chaobiao Zhou,Xiaoyun Jiang,Zhong Li,Chen Xu

DOI: https://doi.org/10.1109/JLT.2019.2914183

2019-11-04

Abstract:Black phosphorus (BP) as a promising two-dimensional material with extraordinary optical properties constitutes an excellent building block in multilayer hyperbolic metamaterials. In this work, we design a multilayer structure composed of BP/dielectric layer stacking unit cells patterned on a gold mirror and theoretically demonstrate the tunable anisotropic absorption in the infrared regime. The electric dipole resonance between the adjacent unit cells drives the structure in the critical coupling state, and impedance of the structure matches to that of free space, showing the perfect absorption for one polarization direction, while the impedance mismatch for the other polarization direction leads to only 8.2$\%$ absorption at the same wavelength. The anisotropic absorption response of the proposed structure can be attributed to the intrinsic anisotropy of BP, which exhibits few dependence on the incident angle. Furthermore, we investigate the tunable optical absorption of the proposed structure with the electron doping of BP and the geometric parameters. These results demonstrate great potentials of BP in constituting multilayer hyperbolic metamaterials, and open up avenues in designing anisotropic metadevices with tunable spectral and polarization selectivity in the infrared regime.

Physics
Optical Properties of Black Phosphorus and its Analogues

Xiaomu Wang,Fengnian Xia

DOI: https://doi.org/10.1364/CLEO_SI.2016.SW1R.1

2016-01-01

Abstract:Recently, black phosphorus (BP) emerges as a promising new two dimensional (2D) material due to its unique physical properties. In this talk, we will review the recent study of optical properties of thin-film to monolayer BP and the development of BP based photonic devices.
Black Phosphorus Optoelectronics

Xiaomu Wang,Fengnian Xia

DOI: https://doi.org/10.1364/cleo_si.2016.sw1r.1

2016-01-01

Abstract:Recently, black phosphorus (BP) emerges as a promising new two dimensional (2D) material due to its unique physical properties. In this talk, we will review the recent study of optical properties of thin-film to monolayer BP and the development of BP based photonic devices.
Optical Anisotropy of Black Phosphorus in the Visible Regime

Nannan Mao,Jingyi Tang,Liming Xie,Juanxia Wu,Bowen Han,Jingjing Lin,Shibin Deng,Wei Ji,Hua Xu,Kaihui Liu,Lianming Tong,Jin Zhang

DOI: https://doi.org/10.1021/jacs.5b10685

IF: 15

2015-01-01

Journal of the American Chemical Society

Abstract:The striking in-plane anisotropy remains one of the most intriguing properties for the newly rediscovered black phosphorus (BP) 2D crystals. However, because of its rather low-energy band gap, the optical anisotropy of few-layer BP has been primarily investigated in the near-infrared (NIR) regime. Moreover, the essential physics that determine the intrinsic anisotropic optical property of few-layer BP, which is of great importance for practical applications in optical and optoelectronic devices, are still in the fancy of theory. Herein, we report the direct observation of the optical anisotropy of few-layer BP in the visible regime simply by using polarized optical microscopy. On the basis of the Fresnel equation, the intrinsic anisotropic complex refractive indices (n-iκ) in the visible regime (480-650 nm) were experimentally obtained for the first time using the anisotropic optical contrast spectra. Our findings not only provide a convenient approach to measure the optical constants of 2D layered materials but also suggest a possibility to design novel BP-based photonic devices such as atom-thick light modulators, including linear polarizer, phase plate, and optical compensator in a broad spectral range extending to the visible window.
Anisotropic Visible Photoluminescence from Thermally Annealed Few-layer Black Phosphorus.

Chuan Zhao,M Chandra Sekhar,Wei Lu,Chenglong Zhang,Jiawei Lai,Shuang Jia,Dong Sun

DOI: https://doi.org/10.1088/1361-6528/aab98e

IF: 3.5

2018-01-01

Nanotechnology

Abstract:Black phosphorus, a two-dimensional material, with high carrier mobility, tunable direct bandgap and anisotropic electronic properties has attracted enormous research interest towards potential application in electronic, optoelectronic and optomechanical devices. The bandgap of BP is thickness dependent, ranging from 0.3 eV for bulk to 1.3 eV for monolayer, while lacking in the visible region, a widely used optical regime for practical optoelectronic applications. In this work, photoluminescence (PL) centered at 605 nm is observed from the thermally annealed BP with thickness <= 20 nm. This higher energy PL is most likely the consequence of the formation of higher bandgap phosphorene oxides and suboxides on the surface BP layers as a result of the enhanced rate of oxidation. Moreover, the polarization-resolved PL measurements show that the emitted light is anisotropic when the excitation polarization is along the armchair direction. However, if excited along zigzag direction, the PL is nearly isotropic. Our findings suggest that the thermal annealing of BP can be used as a convenient route to fill the visible gap of the BP-based optoelectronic and optomechanical devices.
Chalcogenide Glass Waveguide-Integrated Black Phosphorus Mid-Infrared Photodetectors

Skylar Deckoff-Jones,Hongtao Lin,Derek Kita,Hanyu Zheng,Duanhui Li,Wei Zhang,Juejun Hu

DOI: https://doi.org/10.1088/2040-8986/aaadc5

IF: 2.1

2018-01-01

Journal of Optics

Abstract:Black phosphorus (BP) is a promising 2D material that has unique in-plane anisotropy and a 0.3 eV direct bandgap, making it an attractive material for mid-IR photodetectors. So far, waveguide integrated BP photodetectors have been limited to the near-IR on top of Si waveguides that are unable to account for BP’s crystalline orientation. In this work, we employ mid-IR transparent chalcogenide glass (ChG) both as a broadband mid-IR transparent waveguiding material to enable waveguide-integration of BP detectors, and as a passivation layer to prevent BP degradation during device processing as well as in ambient atmosphere post-fabrication. Our ChG-on-BP approach not only leads to the first demonstration of mid-IR waveguide-integrated BP detectors, but also allows us to fabricate devices along different crystalline axes of BP to investigate, for the first time, the impact of in-plane anisotropy on photoresponse of waveguide-integrated devices. The best device exhibits responsivity up to 40 mA W−1 and noise equivalent power as low as 30 pW Hz−1/2 at 2185 nm wavelength. We also found that photodetector responsivities changed by an order of magnitude with different BP orientations. This work validates BP as an effective photodetector material in the mid-IR, and demonstrates the power of the glass-on-2D-material platform for prototyping of 2D material photonic devices.
Anisotropic infrared absorption in monolayer black phosphorus metasurface with / without local oxidative effect

Naixing Feng,Jianxiang Yin,Huan Wang,Xuan Wang,Yuxian Zhang,Zhixiang Huang

DOI: https://doi.org/10.1016/j.optmat.2023.114457

IF: 3.754

2023-10-20

Optical Materials

Abstract:As one kind of anisotropic two-dimensional (2-D) layered material, the monolayer black phosphorus (BP) has ability to excite the surface plasmon resonance in the infrared spectrum , thus providing sufficient conditions for the strong light-matter interaction, so that some potential applications can be shown in the field of optoelectronics. Based on those physical properties, we design the patterned monolayer BP to achieve extremely high infrared absorption , and meanwhile use the finite element method to model the effects of factors such as n-type doping concentration, dielectric thickness, and angle of incidence light. Moreover, due to the strong anisotropic in-plane properties of monolayer BP, we analyze detailedly the absorption spectra in both the armchair and zigzag directions separately, and then understand that low-angle narrow-band absorption in the zigzag direction could be captured in that structure. The structure could achieve perfect absorption in the zigzag direction at an incidence angle of 89.3° with n-type doping concentration n = 3 × 10 13 cm −2 and medium thickness d = 4.6 μm, and the maximum absorption can reach 99.98% with the full width at half peak (FWHM) of only 0.57 μm. Considering the case on surface oxidation, it may occur some possible effects for the perfect absorption, but with our structure, the proposed narrow-band absorption still have wide applications in the sensing and light body monitoring.

materials science, multidisciplinary,optics
Optical Properties of Two-Dimensional Black Phosphorus

Huang Shen-Yang,Zhang Guo-Wei,Wang Fan-Jie,Lei Yu-Chen,Yan Hu-Gen

DOI: https://doi.org/10.7498/aps.70.20201497

IF: 0.906

2021-01-01

Acta Physica Sinica

Abstract:Recently, black phosphorus (BP), an emerging layered two-dimensional (2D) material, has aroused much research interest. Distinguished from most of other 2D materials, BP is always a direct bandgap semiconductor regardless of the thickness, with the bandgap ranging from 0.3 eV (bulk) to 1.7 eV (monolayer), which is just fill the gap in the bandgap between graphene and transition metal dichalcogenides (TMDCs) in this frequency range. Besides, the BP exhibits many intriguing properties, such as high carrier mobility, highly tunable and anisotropic physical properties, which render the BP another star 2D material following graphene and TMDCs. In this review, we mainly focus on the advances in the optical properties of 2D BP, with the content covering the intrinsic optical properties and external perturbation effects on optical properties. Regarding the intrinsic optical properties, we introduce the anisotropic and layer-dependent optical absorption from interband transitions, the layer-dependent exciton binding energy and exciton absorption, visible-to-infrared photoluminescence, and stability of absorption and photoluminescence. As for external perturbation effects on optical properties, we introduce in-plane uniaxial and biaxial strain effects, gate-induced quantum confined Franz-Keldysh effect and Burstein-Moss effect. And finally we give a brief summary and outlook, pointing out some several interesting and important issues of BP, which need further studying urgently such as hyperbolic plasmons, intersubband transitions, optical properties in heterostructures and twist angle moiré superlattice and so on. This review gives an overview of the optical properties of BP and is expected to arouse the interest in further studying the BP.
Black Phosphorus for Mid-Infrared Optoelectronics: Photophysics, Scalable Processing, and Device Applications

Naoki Higashitarumizu,Shu Wang,Shifan Wang,Hyungjin Kim,James Bullock,Ali Javey

DOI: https://doi.org/10.1021/acs.nanolett.4c04027

IF: 10.8

2024-10-16

Nano Letters

Abstract:High efficiency mid-infrared (λ = 3-8 μm) light emitters and photodetectors are pivotal for advancing next-generation optoelectronics. However, narrow-bandgap semiconductors face fundamental challenges such as pronounced nonradiative carrier recombination and thermally generated noise, which impede device performance. Recently, two-dimensional layered black phosphorus (BP) and its alloys have attracted substantial interest for mid-infrared device applications, demonstrating superior performance...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Polarization and Thickness Dependent Absorption Properties of Black Phosphorus: New Saturable Absorber for Ultrafast Pulse Generation

Diao Li,Henri Jussila,Lasse Karvonen,Guojun Ye,Harri Lipsanen,Xianhui Chen,Zhipei Sun

DOI: https://doi.org/10.1038/srep15899

IF: 4.6

2015-01-01

Scientific Reports

Abstract:Black phosphorus (BP) has recently been rediscovered as a new and interesting two-dimensional material due to its unique electronic and optical properties. Here, we study the linear and nonlinear optical properties of BP flakes. We observe that both the linear and nonlinear optical properties are anisotropic and can be tuned by the film thickness in BP, completely different from other typical two-dimensional layered materials (e.g., graphene and the most studied transition metal dichalcogenides). We then use the nonlinear optical properties of BP for ultrafast (pulse duration down to ~786 fs in mode-locking) and large-energy (pulse energy up to >18 nJ in Q-switching) pulse generation in fiber lasers at the near-infrared telecommunication band ~1.5 μm. We observe that the output of our BP based pulsed lasers is linearly polarized (with a degree-of-polarization ~98% in mode-locking, >99% in Q-switching, respectively) due to the anisotropic optical property of BP. Our results underscore the relatively large optical nonlinearity of BP with unique polarization and thickness dependence and its potential for polarized optical pulse generation, paving the way to BP based nonlinear and ultrafast photonic applications ( e.g. , ultrafast all-optical polarization switches/modulators, frequency converters etc.).
Toward high-performance two-dimensional black phosphorus electronic and optoelectronic devices*

Xuefei Li,Xiong Xiong,Yanqing Wu

DOI: https://doi.org/10.1088/1674-1056/26/3/037307

2017-01-01

Chinese Physics B

Abstract:Recently, black phosphorus (BP) has joined the two-dimensional material family as a promising candidate for electronic and photonic applications due to its moderate bandgap, high carrier mobility, and unusual in-plane anisotropy. Here, we review recent progress in BP-based devices, such as field-effect transistors, contact resistance, quantum transport, stability, photodetector, heterostructure, and in-plane anisotropy. We also give our perspectives on future BP research directions.
Optoelectronic characteristics and application of black phosphorus and its analogs

Ying-Ying Li,Bo Gao,Ying Han,Bing-Kun Chen,Jia-Yu Huo

DOI: https://doi.org/10.48550/arXiv.2102.13316

2021-02-26

Abstract:The tunable bandgap from 0.3 eV to 2 eV of black phosphorus (BP) makes it to fill the gap in graphene. When studying the properties of BP more comprehensive, scientists have discovered that many two-dimensional materials, such as tellurene, antimonene, bismuthene, indium selenide and tin sulfide, have similar structures and properties to black phosphorus thus called black phosphorus analogs. In this review, we briefly introduce preparation methods of black phosphorus and its analogs, with emphasis on the method of mechanical exfoliation (ME), liquid phase exfoliation (LPE) and chemical vapor deposition (CVD). And their characterization and properties according to their classification of single-element materials and multi-element materials are described. We focus on the performance of passively mode-locked fiber lasers using BP and its analogs as saturable absorbers (SA) and demonstrated this part through classification of working wavelength. Finally, we introduce the application of BP and its analogs, and discuss their future research prospects.

Optics,Materials Science
Recent advances in black phosphorus-based optical sensors

Houjing Liu,Hongjie Song,Yingying Su,Yi Lv

DOI: https://doi.org/10.1080/05704928.2018.1558406

2019-02-26

Applied Spectroscopy Reviews

Abstract:Black phosphorus (BP), one of new ultrathin two-dimensional (2D) materials, has drawn considerable attention in various applications such as in gas sensing, photoelectric devices, cancer therapy, drug deliver and so on. Owing to its unique structure, excellent optical and electronic properties and good biocompatibility, BP in the field of optical sensors is a rising star and has been intensively investigated in the recent years. In this mini-review, we aim to describe recent development of BP-based optical sensors including colorimetric, fluorescent, electrogenerated chemiluminescent and chemiluminescent sensors.

spectroscopy,instruments & instrumentation
Optical Properties of Black Phosphorus

Xiaomu Wang,Shoufeng Lan

DOI: https://doi.org/10.1364/aop.8.000618

IF: 24.75

2016-01-01

Advances in Optics and Photonics

Abstract:Black phosphorus is a newly rising layered material with tremendous and intriguing physical, chemical, and electronic properties. Recently, it was reintroduced into the community from the perspective of two-dimensional ( 2D) materials, showing excellent carrier mobility, strong light-matter interactions in the mid-infrared ( mid-IR) range, and unique anisotropic physical properties. These features are beyond the existing 2D materials in terms of bandgap range and mobility/bandgap trade-off, making it possible to bridge the application gaps ranging from mid-IR photonics to high-performance field-effect devices. In this paper, we review the status and perspectives of the optical properties of black phosphorus, with a particular emphasis on their broadband tunable bandgap and anisotropic optical properties. We began with a brief introduction on the history, synthesis, crystal/band structures, and basic physical properties of black phosphorus. In Section 3, we discuss the optical properties of black phosphorus, including comparison of the electronic-excitation-induced versus phonon-excitation-induced optical properties, linear versus nonlinear absorption, and static versus dynamic photoresponse, as well as the quasi-particle effect versus the effect. After that, we exemplify typical black phosphorus photonic devices in Section 4. We highlight recent progress in photodetectors covering mid-IR and terahertz wavelength, ultrafast Q-switching and mode-locking pulse lasers and nanophotonic devices. Finally, we present a summary and outlook of black phosphorus regarding current challenges and future application opportunities in Section 5. (C) 2016 Optical Society of America
Black Phosphorus Mid-Infrared Photodetectors with High Gain

Qiushi Guo,Andreas Pospischil,Maruf Bhuiyan,Hao Jiang,He Tian,Damon Farmer,Bingchen Deng,Cheng Li,Shu-Jen Han,Han Wang,Qiangfei Xia,Tso-Ping Ma,Thomas Mueller,Fengnian Xia

DOI: https://doi.org/10.1021/acs.nanolett.6b01977

IF: 10.8

2016-01-01

Nano Letters

Abstract:Recently, black phosphorus (BP) has joined the two-dimensional material family as a promising candidate for photonic applications due to its moderate bandgap, high carrier mobility, and compatibility with a diverse range of substrates. Photodetectors are probably the most explored BP photonic devices, however, their unique potential compared with other layered materials in the mid-infrared wavelength range has not been revealed. Here, we demonstrate BP mid-infrared detectors at 3.39 μm with high internal gain, resulting in an external responsivity of 82 A/W. Noise measurements show that such BP photodetectors are capable of sensing mid-infrared light in the picowatt range. Moreover, the high photoresponse remains effective at kilohertz modulation frequencies, because of the fast carrier dynamics arising from BP's moderate bandgap. The high photoresponse at mid-infrared wavelengths and the large dynamic bandwidth, together with its unique polarization dependent response induced by low crystalline symmetry, can be coalesced to promise photonic applications such as chip-scale mid-infrared sensing and imaging at low light levels.
Black Phosphorus Junctions and Their Electrical and Optoelectronic Applications

Ningqin Deng,He Tian,Jian Zhang,Jinming Jian,Fan Wu,Yang Shen,Yi Yang,Tian-Ling Ren

DOI: https://doi.org/10.1088/1674-4926/42/8/081001

2021-01-01

Journal of Semiconductors

Abstract:Black phosphorus(BP), an emerging two-dimensional material, is considered a promising candidate for next-generation electronic and optoelectronic devices due to in-plane anisotropy, high mobility, and direct bandgap. However, BP devices face challenges due to their limited stability, photo-response speed, and detection range. To enhance BP with powerful electrical and optical performance, the BP heterostructures can be created. In this review, the state-of-the-art heterostructures and their electrical and optoelectronic applications based on black phosphorus are discussed. Five parts introduce the performance of BP-based devices, including black phosphorus sandwich structure by hBN with better stability and higher mobility,black phosphorus homojunction by dual-gate structure for optical applications, black phosphorus heterojunction with other 2D materials for faster photo-detection, black phosphorus heterojunction integration with 3 D bulk material, and BP via Asdoping tunable bandgap enabling photo-detection up to 8.2 μm. Finally, we discuss the challenges and prospects for BP electrical and optical devices and applications.
Abnormal Near-Infrared Absorption in 2D Black Phosphorus Induced by Ag Nanoclusters Surface Functionalization.

Zehua Hu,Qiang Li,Bo Lei,Jing Wu,Qionghua Zhou,Chengding Gu,Xinglin Wen,Junyong Wang,Yanpeng Liu,Shisheng Li,Yue Zheng,Junpeng Lu,Jun He,Li Wang,Qihua Xiong,Jinlan Wang,Wei Chen

DOI: https://doi.org/10.1002/adma.201801931

IF: 29.4

2018-01-01

Advanced Materials

Abstract:Black phosphorus (BP), as a fast emerging 2D material, shows promising potential in near-infrared (NIR) photodetection owing to its relatively small direct thickness-dependent bandgaps. However, the poor NIR absorption due to the atomically thin nature strongly hinders the practical application. In this study, it is demonstrated that surface functionalization of Ag nanoclusters on 2D BP can induce an abnormal NIR absorption at approximate to 746 nm, leading to approximate to 35 (138) times enhancement in 808 (730) nm NIR photoresponse for BP-based field-effect transistors. First-principles calculations reveal that localized bands are introduced into the bandgap of BP, serving as the midgap states, which create new transitions to the conduction band of BP and eventually lead to the abnormal absorption. This work provides a simple yet effective method to dramatically increase the NIR absorption of BP, which is crucial for developing high-performance NIR optoelectronic devices.

Black phosphorus-based anisotropic absorption structure in the mid-infrared

Rediscovering Black Phosphorus: A Unique Anisotropic 2D Material for Optoelectronics and Electronics

Tunable anisotropic absorption in monolayer black phosphorus using critical coupling

Anisotropic perfect absorber based on black phosphorus-graphene

Tunable anisotropic perfect absorption in hyperbolic metamaterials based on black phosphorous/dielectric multilayer structures

Optical Properties of Black Phosphorus and its Analogues

Black Phosphorus Optoelectronics

Optical Anisotropy of Black Phosphorus in the Visible Regime

Anisotropic Visible Photoluminescence from Thermally Annealed Few-layer Black Phosphorus.

Chalcogenide Glass Waveguide-Integrated Black Phosphorus Mid-Infrared Photodetectors

Anisotropic infrared absorption in monolayer black phosphorus metasurface with / without local oxidative effect

Optical Properties of Two-Dimensional Black Phosphorus

Black Phosphorus for Mid-Infrared Optoelectronics: Photophysics, Scalable Processing, and Device Applications

Polarization and Thickness Dependent Absorption Properties of Black Phosphorus: New Saturable Absorber for Ultrafast Pulse Generation

Toward high-performance two-dimensional black phosphorus electronic and optoelectronic devices*

Optoelectronic characteristics and application of black phosphorus and its analogs

Recent advances in black phosphorus-based optical sensors

Optical Properties of Black Phosphorus

Black Phosphorus Mid-Infrared Photodetectors with High Gain

Black Phosphorus Junctions and Their Electrical and Optoelectronic Applications

Abnormal Near-Infrared Absorption in 2D Black Phosphorus Induced by Ag Nanoclusters Surface Functionalization.