Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. In recent years, the use of hybrid composites consisting of natural and synthetic fibers has gained increasing attention due to their potential for improved mechanical performance and sustainability. The primary aim of this study was to explore the impact of integrating jute and carbon fiber components into hybrid composites on the enhancement of the materials' mechanical properties. Jute and carbon bidirectional fabrics were used with a bi-component epoxy matrix in order to fabricate the hybrid composite materials. The carbon bidirectional fabrics were placed on the outer layers, while the jute fabrics were used as the core of the hybrid composites. The core fibers were controlled by the number of layers (5), while the synthetic outer layers were varied (1 and 2, symmetrically and asymmetrically). The composite materials were characterized mechanically via tensile, flexural and impact tests. The results show that both the hybridization technique and the reinforcement symmetry significantly affect the general mechanical properties. In the analysis of tensile properties, a consistent monotonic increase in enhancement tendencies was observed with an increasing fraction of carbon fibers. Conversely, under flexion, a plateau was evident with regard to the hybridization architectural variations, although this behavior was not observed for the flexural modulus, which exhibited a continuous monotonic enhancement relative to the fraction of carbon fibers. Finally, under impact conditions, it was found that symmetry of the synthetic envelope is highly advantageous.

Mechanical properties and statistical analysis of polyester composite reinforced with miriti fibers braided using crochet technique

Study on the Effect of Pre-Tension on Performance of Polyester/cotton/silk Sirofil Composite Yarn

Mechanical Properties of Alfa, Sisal, and Hybrid Alfa/Sisal Fiber Satin Cloth Reinforced Epoxy

Effect of Chemical Treatments on the Mechanical Properties of Jute/Polyester Composites

The Influence of Fiber Treatment on the Morphology, Water Absorption Capacity and Mechanical Behavior of Curauá Fibers

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Water Sorption in Hybrid Polyester/Glass/Jute Composites Processed via Compression Molding and Vacuum-Assisted Resin Transfer Molding

Comparison of Young’s Modulus of Continuous and Aligned Lignocellulosic Jute and Mallow Fibers Reinforced Polyester Composites Determined Both Experimentally and from Theoretical Prediction Models

Exploration of Mechanical Attributes, Thermal Behaviors and Atomic Force Analysis of Alkali Treated Hybrid Polyester Composites for an Engineering Application

Influence of preheating and post-curing on a novel fiber-reinforced composite post material

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Investigation on the tensile and flexural behavior of coconut inflorescence fiber reinforced unsaturated polyester resin composites

Evaluation of Mechanical and Water Absorption Behaviors of Jute/Carbon Fiber Reinforced Polyester Hybrid Composites

Mechanical and Hygroscopic Characteristics of Unidirectional Jute/Glass and Jute/Carbon Hybrid Laminates

Physico-mechanical Properties of Unsaturated Polyester Resin Reinforced Maize Cob and Jute Fiber Composites

Morphological, chemical and mechanical properties of hybrid polyester composites reinforced with bamboo fibers and kaolin waste

Effect of Water Absorption and Stacking Sequences on the Tensile Properties and Damage Mechanisms of Hybrid Polyester/Glass/Jute Composites

Mechanical Properties of Boehmeria nivea Natural Fabric Reinforced Epoxy Matrix Composite Prepared by Vacuum-Assisted Resin Infusion Molding

Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites

Influence of Mercerization on the Physical and Mechanical Properties of Polymeric Composites Reinforced with Amazonian Fiber

Mechanical characterization of jute/carbon hybrid epoxy composites