Abstract:As well known, sustainability issues represented by the environment and resource protection have been paid close attention nowadays. Natural fiber has been an increasing interest and promising as reinforcing fiber in polymeric composites due to its low density, cost, acceptable specific strength and biodegradation. Even though, the principle challenge for natural fibers used as reinforcement is their internal strong water-absorption ability when the exposed in wet and water environment. Long-term hydrothermal degradation behavior of Glass reinforced composite (GFRP) and jute reinforced composite (JFRP) have been discussed in previous study on the basis of the great amount of physical and mechanical testing results. As former working reported, gained water content increases linearly against the square root of aging time followed by gradual increase trend in longer duration both in JFRP and GFRP. In particularly, JFRP’s weight loss performance occurred earlier with higher value compared to GFRP. However, water absorption and weight loss mechanism, relationship between weight change and retention of mechanical property for JFRP didn’t report and illustrate clearly and extensively. Therefore, in order to figure it out comprehensively, the current study was focus on hydrothermal ageing mechanism and corresponding degraded mechanical behavior. Firstly, 2 layers of deeply dried and natural dried jute woven fabric reinforced unsaturated polyester were fabricated by hand-layup method. The cut samples were immersed into 80°C hot water bath for predetermined durations and inspected by ultrasonic wave. Afterwards, 3-point bending test with acoustic emission (AE) measurement was carried out for aged samples. The weight change mechanism, evolution of internal deterioration and mechanical property along with ageing time was investigated. The result indicated that JFRP can absorb water easily and quickly compared with GFRP owing to jute fiber’s hydroscopic nature. Weight loss was caused as a result of resin particle loss and pectin dissolution from the developed micro-crack owing to hydrothermal water environment. What’s more, internal serious deterioration occurred after 24 hours immersion leading to larger reduction of mechanical property.

Effect of Water Absorption and Stacking Sequences on the Tensile Properties and Damage Mechanisms of Hybrid Polyester/Glass/Jute Composites

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Effects of Hygrothermal Aging and Cyclic Compressive Loading on the Mechanical and Electrical Properties of Conductive Composites

Water Sorption in Hybrid Polyester/Glass/Jute Composites Processed via Compression Molding and Vacuum-Assisted Resin Transfer Molding

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

Experimental investigation of the mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites

Influence of stacking sequences of woven jute-carbon hybrid composites: Diffusion mechanism and mechanical characterization

Effect of different stacking sequences on hybrid carbon/glass/epoxy composites laminate: Thermal, dynamic mechanical and long-term behavior

Effect of Hydrothermal Aging on Damping Properties in Sisal Mat-Reinforced Polyester Composites

Damage Characterization of Ultra High Molecular Weight Polyethylene/ Flax/Jute Fiber Reinforced Melamine Formaldehyde Hybrid Composites using Cone Beam Computed Tomography

Mechanical and Hygroscopic Characteristics of Unidirectional Jute/Glass and Jute/Carbon Hybrid Laminates

Effect of Chemical Treatments on the Mechanical Properties of Jute/Polyester Composites

Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water

Impact of stacking sequence on the thermal and electrical properties of Poly (aryl ether ketone)/glassfiber/buckypaper composites

Static and dynamic mechanical behavior of intra‐hybrid jute/sisal‐reinforced polypropylene composites: Effect of stacking sequence

Influence of water absorption track and pre‐drying treatment on the long‐term hydrothermal aging behavior of recycled jute fabric‐reinforced composites

Evaluation of Mechanical and Water Absorption Behaviors of Jute/Carbon Fiber Reinforced Polyester Hybrid Composites

Interface Modification, Water Absorption Behaviour and Mechanical Properties of Injection Moulded Short Hemp Fiber-Reinforced Thermoplastic Composites

"Impact of ply stacking sequence on the mechanical response of Hybrid Jute-Banana fiber phenoplast composites"

Moisture effect on tensile and low‐velocity impact tests of flax fabric‐reinforced PLA biocomposite

Moisture diffusion analysis and their effects on the mechanical properties of organic particle filled natural fiber reinforced hybrid polymer composites