Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Damage Characterization of Ultra High Molecular Weight Polyethylene/ Flax/Jute Fiber Reinforced Melamine Formaldehyde Hybrid Composites using Cone Beam Computed Tomography

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior

Influence of stacking sequence on mechanical properties of areca-kenaf fiber- reinforced polymer hybrid composite

Fabrication and characterization of laminated natural fibers and SS303 wire mesh reinforced epoxy-based hybrid composite

Experimental Investigation of Bi-Directional Flax with Ramie Fibre-Reinforced Phenol-Formaldehyde Hybrid Composites

The morphological and mechanical characterization of UHMWPE based composite: an experimental study

Experimental investigation of the mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites

Experimental Investigation on Volume Fraction of Mechanical and Physical Properties of Flax and Bamboo Fibers Reinforced Hybrid Epoxy Composites

"Impact of ply stacking sequence on the mechanical response of Hybrid Jute-Banana fiber phenoplast composites"

Exploring the influence of stacking sequence on the mechanical properties of flax-ramie bi-quadratic layered hybrid epoxy composites

Influence of Fibre Stacking Sequence on Impact Resistance and Residual Strength in Flax/Basalt Hybrid Laminates

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Effect of stacking sequence and interfacial analysis of biomass sheep wool/glass fiber reinforced epoxy biocomposites

Synthetic/natural fiber combining action on mechanical performance of polypropylene composite made via compression mould route

Static and dynamic mechanical behavior of intra‐hybrid jute/sisal‐reinforced polypropylene composites: Effect of stacking sequence

High velocity impact, Flexural and Dynamic Mechanical Properties of Flax/Carbon/Kevlar Reinforced Bio-Phenolic/Epoxy Composites

Performance of Hybrid Composites Fabricated by Flax/Hemp Fibers Using Wire Mesh Plain Weaving Techniques

Fiber Alignment's Effect on the Properties of Hybrid Glass/Flax Fiber‐Reinforced Epoxy Composite Laminates

Experimental and Numerical Analysis of Lightweight Hybrid Composites Under Low Velocity Impact

Influence of layering variation with addition of bio-fillers on mechanical and thermal performances of hybrid polyester composites

Enhancement of mechanical and structural characteristics through the hybridization of carbon fiber with Cordia‐dichotoma/polyester composite