Abstract:Effective thermal management is key to ensuring the reliable operation of high power electronic equipment. In this study, the strategy of phase transition and liquid cooling coupling applied to transient high power electronic equipment has been examined. In order to improve the performance of the phase changing material (PCM) in temperature control, the effects of the coupling structure have been addressed with a consideration of fin, copper foam (CF), graphite foam (GF), fin-copper foam (FCF) and fin-graphite foam (FGF) structures in heat dissipation. In this study, pure paraffin wax (PPW) was used as phase change material to prepare heat sinks based on the above five structures. The experimental study investigates the impact of different thermal conductivity strategies on temperature control characteristics, with a focus on cold capacity recovery and the combined phase change and liquid cooling, using pure paraffin wax module as a reference. The results have revealed that the fin-foam coupling structure delivers a better PCM performance than the single fin or foam structure. Operating at a heating power of 10 W, 15 W and 20 W, the temperature control time of the FGF structure was increased by 13.6 %∼14.6 % relative to the GF structure. At 15 °C with flow rates of 1 L/min, 1.5 L/min, 2 L/min liquid cooling conditions, the cooling capacity recovery time was reduced by 18.8 %, 17.2 %, 19.7 %, respectively. In the phase-change liquid-cooling coupling temperature control experiment, the final temperature increase in the FGF system was 11.7 °C -15.2 °C lower than that of the GF system under the same water temperature and volume flow for a 50 W heat source. The incorporation of fins also enhanced the thermal conductivity strengthening capability of the copper foam and reduced the cold recovery time. Based on the comprehensive evaluation, the FGF structure demonstrates superior temperature control performance and cold recovery characteristics of PCM, making it an optimal strengthening method. Following closely are the FCF, GF, Fin and CF structures. Compared to pure paraffin modules, these five modules exhibit varying degrees of improvement in temperature control and cold capacity recovery efficiency. This study provides guidance for optimizing heat sink design based on PCM in electronic applications.

Influence of the Copper Foam Fin (CFF) shapes on thermal performance of Phase-Change Material (PCM) in an enclosed cavity

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Transient Performance of a PCM-based Heat Sink with a Partially Filled Metal Foam: Effects of the Filling Height Ratio

Numerical thermal performance assessment of phase change process in a PCM/foam-fins enclosure under various thermal conditions

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental investigation of the effect of copper foam pore structure on the thermal performance of phase change material in different centrifugal force fields

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

Numerical simulation on thermal behavior of partially filled metal foam composite phase change materials

Experimental and numerical study on the effect of the intelligent memory metal fin on the melting and solidification process of PCM

How can copper foam better promote the melting process of phase change materials

Influence of the foam-fin structure on the thermal performance of a coupled phase change liquid cooling module

Analyzing competing effects between heat transfer area and natural convection to enhance heat transfer in latent heat storage

Temperature Control Performance of High Thermal Conductivity Metal Foam/paraffin Composite Phase Change Material: an Experimental Study

Experimental and numerical investigations on the intermittent heat transfer performance of rectangular cavity plate fin phase change material based heat sink

Heat transfer performance of copper foam/paraffin composite phase change material under different centrifugal forces-A visual experimental study

Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe

Numerical Study of Melting Performance Enhancement for PCM in an Annular Enclosure with Internal-External Fins and Metal Foams

Role of partial and gradient filling strategies of copper foam on latent thermal energy storage: An experimental study

Strengthening of melting-solidification process in latent heat storage through sine wave shaped fins

Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam

Thermal energy storage of phase change materials in the solidification process inside the quasi‐square heat exchanger: CFD simulation