Abstract:The complete melting and solidification time of the phase change thermal storage system is one of the key performance parameters. However, the phase change material (PCM) has the weakness of poor heat transfer properties. Furthermore, PCM has different heat transfer mechanisms during melting and solidification. Therefore, this paper proposes the intelligent memory metal fin for the square cavity phase change thermal storage unit to enhance PCM melting and solidification process. This study uses a combination of numerical calculations as well as experimental studies. The structure of the intelligent memory metal fin is optimized. The experimental results show 28.6% reduction in the complete melting time of the PCM using the intelligent memory metal fin compared to the use of the straight fin. In addition, the simulations are validated experimentally to improve the accuracy of the numerical simulations. The simulation results show that the melting and solidification time decreases with the increase in the length of the intelligent memory metal fin. Compared with the fin dimensionless length of 0.75, the complete melting and solidification time at 0.95 are reduced by 34.14% and 28.27%, respectively. However, as the fin length increases during the melting process, the percentage increase in efficiency decreases. The complete melting time decreases by 17.9% and 4.2% for fin lengths from 0.8 to 0.85 and 0.85 to 0.9. Considering the amount of fin and the amount of PCM, the optimum fin dimensionless length for this model is 0.85. Variations in fin deflection affect the melting process of the PCM. The complete melting time is reduced by 4.6% and increased by 1% when the fin deflection goes from 0.6 to 0.7 and 0.7 to 0.8, respectively. Hence, there is an optimum deflection for the intelligent memory metal fin deformation process to obtain the fastest melting rate. The optimum fin deflection for this simulation is a dimensionless deflection of 0.7.

Experimental and numerical study on the effect of the intelligent memory metal fin on the melting and solidification process of PCM

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Strengthening of melting-solidification process in latent heat storage through sine wave shaped fins

Numerical study on the melting performance of PCM by fractal fins in three-tube heat storage system

Numerical Study of Melting Performance Enhancement for PCM in an Annular Enclosure with Internal-External Fins and Metal Foams

Numerical and experimental investigations on melting heat transfer performance of PCM in finned cold thermal energy storage

Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin

Numerical investigation of enhanced PCM melting performance using a thermally conductive fin in a pneumatic-based extrusion system

Assessment on the melting performance of a phase change material based shell and tube thermal energy storage device containing leaf-shaped longitudinal fins

Enhancement of phase change material melting using nanoparticles and magnetic field in the thermal energy storage system with strip fins

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Numerical simulation of fin arrangements on the melting process of PCM in a rectangular unit

Influence of the Copper Foam Fin (CFF) shapes on thermal performance of Phase-Change Material (PCM) in an enclosed cavity

Analyzing competing effects between heat transfer area and natural convection to enhance heat transfer in latent heat storage

Numerical Simulation of Heat Transfer Characteristics of Phase Change Materials Enhanced with Multi-Angle Fins

Twisted-fin Parametric Study to Enhance the Solidification Performance of Phase-Change Material in A Shell-and-Tube Latent Heat Thermal Energy Storage System

Numerical melting performance analysis of a cylindrical thermal energy storage unit using nano-enhanced PCM and multiple horizontal fins

Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe

Heat transfer analysis of phase change material composited with metal foam-fin hybrid structure in inclination container by numerical simulation and artificial neural network

Melting of hybrid nano-enhanced phase change material in an inclined finned rectangular cavity for cold energy storage

Melting and Heat Transfer Characteristics of Phase Change Material: A Comparative Study On Wire Mesh Finned Structure and Other Fin Configurations