Fouling in Membrane Filtration and Remediation Methods

A. Abdelrasoul,H. Doan,A. Lohi

DOI: https://doi.org/10.5772/52370

2013-07-24

Abstract:Fouling in Membrane Filtration and Remediation Methods | InTechOpen, Published on: 2013-07-24. Authors: A. Abdelrasoul, H. Doan and A. Lohi

What problem does this paper attempt to address?

Review of New Approaches for Fouling Mitigation in Membrane Separation Processes in Water Treatment Applications

Mervette El Batouti,Nouf F. Alharby,Mahmoud M. Elewa

DOI: https://doi.org/10.3390/separations9010001

2021-12-21

Separations

Abstract:This review investigates antifouling agents used in the process of membrane separation (MS), in reverse osmosis (RO), ultrafiltration (UF), nanofiltration (NF), microfiltration (MF), membrane distillation (MD), and membrane bioreactors (MBR), and clarifies the fouling mechanism. Membrane fouling is an incomplete substance formed on the membrane surface, which will quickly reduce the permeation flux and damage the membrane. Foulant is colloidal matter: organic matter (humic acid, protein, carbohydrate, nano/microplastics), inorganic matter (clay such as potassium montmorillonite, silica salt, metal oxide, etc.), and biological matter (viruses, bacteria and microorganisms adhering to the surface of the membrane in the case of nutrients) The stability and performance of the tested nanometric membranes, as well as the mitigation of pollution assisted by electricity and the cleaning and repair of membranes, are reported. Physical, chemical, physico-chemical, and biological methods for cleaning membranes. Biologically induced biofilm dispersion effectively controls fouling. Dynamic changes in membrane foulants during long-term operation are critical to the development and implementation of fouling control methods. Membrane fouling control strategies show that improving membrane performance is not only the end goal, but new ideas and new technologies for membrane cleaning and repair need to be explored and developed in order to develop future applications.

chemistry, analytical
Microscopic Mechanism Of Membrane Fouling In Micro-Filtration

Zhanping Cao,Jingli Zhang,Ligang Lin,Liping Xie

DOI: https://doi.org/10.1080/19443994.2015.1015451

IF: 1.1

2016-01-01

Desalination and Water Treatment

Abstract:The microscopic mechanism of the membrane fouling was studied using Poiseuille equation, Langmuir adsorption model and Darcy's law. The experimental result showed that the change in membrane filtration resistance could be divided into three stages in a membrane bioreactor. The first stage was the adsorption and blocking of the membrane pore, and it is completed in a short time (t <= 1 min), so it was suitable to combine its resistance with the intrinsic membrane resistance. The second stage was the change in the concentration polarization during which the resistance increased rapidly. The resistance of the concentration polarization and the resistance of the gel layer were of same character and could be united by the Langmuir relationship. The third stage had stable filtration resistance when the deposition and proliferation of the pollutants on the membrane surface achieved a dynamical equilibrium. A unified model of membrane filtration was proposed for the three stages. The experimental data of the emulsified oil wastewater filtrated by micro-membrane fitted the unified model well.
A Comprehensive Review on Membrane Fouling: Mathematical Modelling, Prediction, Diagnosis, and Mitigation

Nour AlSawaftah,Waad Abuwatfa,Naif Darwish,Ghaleb Husseini

DOI: https://doi.org/10.3390/w13091327

IF: 3.53

2021-05-11

Water

Abstract:Membrane-based separation has gained increased popularity over the past few decades, particularly reverse osmosis (RO). A major impediment to the improved performance of membrane separation processes, in general, is membrane fouling. Fouling has detrimental effects on the membrane’s performance and integrity, as the deposition and accumulation of foulants on its surface and/or within its pores leads to a decline in the permeate flux, deterioration of selectivity, and permeability, as well as a significantly reduced lifespan. Several factors influence the fouling-propensity of a membrane, such as surface morphology, roughness, hydrophobicity, and material of fabrication. Generally, fouling can be categorized into particulate, organic, inorganic, and biofouling. Efficient prediction techniques and diagnostics are integral for strategizing control, management, and mitigation interventions to minimize the damage of fouling occurrences in the membranes. To improve the antifouling characteristics of RO membranes, surface enhancements by different chemical and physical means have been extensively sought after. Moreover, research efforts have been directed towards synthesizing membranes using novel materials that would improve their antifouling performance. This paper presents a review of the different membrane fouling types, fouling-inducing factors, predictive methods, diagnostic techniques, and mitigation strategies, with a special focus on RO membrane fouling.

environmental sciences,water resources
Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Huimin Ruan,Bin Li,Jianbing Ji,Arcadio Sotto,Bart Van der Bruggen,Jiangnan Shen,Congjie Gao

DOI: https://doi.org/10.1039/c8ra00637g

IF: 4.036

2018-01-01

RSC Advances

Abstract:Membrane fouling is an urgent problem needing to be solved for practical application of nanofiltration membranes. In this study, an amphiphilic nanofiltration membrane with hydrophilic domains as well as low surface energy domains was developed, to integrate a fouling-resistant defense mechanism and a fouling-release defense mechanism. A simple and effective two-step surface modification of a polyamide NF membrane was applied. Firstly, triethanolamine (TEOA) with abundant hydrophilic functional groups was grafted to the membrane surface via reacting with the residual acyl chloride group of the nanofiltration membrane, making the nanofiltration membranes more hydrophilic; secondly, the 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFTS), well-known as a low surface energy material, was covalently grafted on the hydroxyl functional groups through hydrogen bonding. Filtration experiments with model foulants (bovine serum albumin (BSA) protein solution, humic acid solution (HA) and sodium alginate solution (SA)) were performed to estimate the antifouling properties of the newly developed nanofiltration membranes. As a result of surface modification proposed in this study the antifouling properties of an amphiphilic modified F-PA/PSF membrane were enhanced more than 10% compared to the PA/PSF specimen in terms of flux recovery ratio.
Fouling and its control in membrane distillation—A review

Leonard D. Tijing,Yun Chul Woo,June-Seok Choi,Sangho Lee,Seung-Hyun Kim,Ho Kyong Shon

DOI: https://doi.org/10.1016/j.memsci.2014.09.042

IF: 9.5

2015-02-01

Journal of Membrane Science

Abstract:Membrane distillation (MD) is an emerging thermally-driven technology that poses a lot of promise in desalination, and water and wastewater treatment. Developments in membrane design and the use of alternative energy sources have provided much improvement in the viability of MD for different applications. However, fouling of membranes is still one of the major issues that hounds the long-term stability performance of MD. Membrane fouling is the accumulation of unwanted materials on the surface or inside the pores of a membrane that results to a detrimental effect on the overall performance of MD. If not addressed appropriately, it could lead to membrane damage, early membrane replacement or even shutdown of operation. Similar with other membrane separation processes, fouling of MD is still an unresolved problem. Due to differences in membrane structure and design, and operational conditions, the fouling formation mechanism in MD may be different from those of pressure-driven membrane processes. In order to properly address the problem of fouling, there is a need to understand the fouling formation and mechanism happening specifically for MD. This review details the different foulants and fouling mechanisms in the MD process, their possible mitigation and control techniques, and characterization strategies that can be of help in understanding and minimizing the fouling problem.

engineering, chemical,polymer science
A review of recent advance in fouling mitigation of NF/RO membranes in water treatment: pretreatment, membrane modification, and chemical cleaning

Dongsheng Zhao,Shuili Yu

DOI: https://doi.org/10.1080/19443994.2014.928804

IF: 1.1

2014-06-23

Desalination and Water Treatment

Abstract:Currently, nanofiltration (NF) and reverse osmosis (RO) membranes are the most widely employed in surface water treatment, but membrane fouling has always been an important problem in the process of its application and scientific community paid wide attentions to this issue. This paper aims at reviewing the recent reports about fouling mitigation of NF/RO membranes, mainly focusing on the feed water pretreatment and membrane modification. In generally, high-quality feed water can ensure long-term stability of the membrane systems through altering size distribution of foulant, reducing its affinity to membrane surface and removing microbial nutrient source. Membrane modification can also effectively enhance anti-fouling capacity of NF/RO membranes by tailoring surface hydrophilicity, roughness, zeta potential, and functional groups so as to reduce the interaction between membrane surface and foulants. Besides, in order to recover the membrane flux of NF/RO systems, chemical cleaning is inevitable. The interaction mechanisms between chemical agent and foulant cake layer on the membrane surface and existing problems in chemical cleaning progress are also summarized. At last, the future research direction in this field is identified.

engineering, chemical,water resources
Outlining the Roles of Membrane-Foulant and Foulant-Foulant Interactions in Organic Fouling During Microfiltration and Ultrafiltration: A Mini-Review

Hao Xu,Kang Xiao,Xiaomao Wang,Shuai Liang,Chunhai Wei,Xianghua Wen,Xia Huang

DOI: https://doi.org/10.3389/fchem.2020.00417

IF: 5.5

2020-06-03

Frontiers in Chemistry

Abstract:Membrane fouling remains a notorious problem in microfiltration (MF) and ultrafiltration (UF), and a systematic understanding of the fouling mechanisms is fundamental for solving this problem. Given a wide assortment of fouling studies in the literature, it is essential that the numerous pieces of information on this topic could be clearly compiled. In this review, we outline the roles of membrane-foulant and foulant-foulant intermolecular interactions in MF/UF organic fouling. The membrane-foulant interactions govern the initial pore blocking and adsorption stage, whereas the foulant-foulant interactions prevail in the subsequent build-up of a surface foulant layer (e.g., a gel layer). We classify the interactions into non-covalent interactions (e.g., hydrophobic and electrostatic interactions), covalent interactions (e.g., metal-organic complexation), and spatial effects (related to pore structure, surface morphology, and foulants size for instance). They have either short- or long-range influences on the transportation and immobilization of the foulant toward the membrane. Specifically, we profile the individual impacts and interplay between the different interactions along the fouling stages. Finally, anti-fouling strategies are discussed for a targeted control of the membrane-foulant and foulant-foulant interactions.

chemistry, multidisciplinary
Fouling and Cleaning of Microfiltration Membrane in Municipal Wastewater Reclamation.

CH Xing,XH Wen,Y Qian,D Sun,PS Klose,XQ Zhang

DOI: https://doi.org/10.2166/wst.2003.0065

IF: 2.43

2003-01-01

Water Science & Technology

Abstract:This paper presents an investigation on fouling and cleaning of a tubular microfiltration membrane for municipal wastewater reclamation. A bi-level complex model, namely channel clogging and pore plugging, was introduced to elucidate the fouling mechanism. Based on 135 days of microfiltration of activated sludge, a preventive method for channel clogging was reasonably proposed and proven to be effective. Without channel clogging, the operation period was observed a five-fold increase on average, reaching 3-4 weeks. To remove pore plugging, a multi-step chemical cleaning was employed and further optimized in terms of temperature and alkaline concentration. Generally, the chemical cleaning could restore the membrane permeability to higher than 90%.
Membrane Fouling Phenomena in Microfluidic Systems: From Technical Challenges to Scientific Opportunities

Giovanna Tomaiuolo,Stefano Guido,Andrea Cirillo

DOI: https://doi.org/10.3390/mi12070820

IF: 3.4

2021-07-13

Micromachines

Abstract:The almost ubiquitous, though undesired, deposition and accumulation of suspended/dissolved matter on solid surfaces, known as fouling, represents a crucial issue strongly affecting the efficiency and sustainability of micro-scale reactors. Fouling becomes even more detrimental for all the applications that require the use of membrane separation units. As a matter of fact, membrane technology is a key route towards process intensification, having the potential to replace conventional separation procedures, with significant energy savings and reduced environmental impact, in a broad range of applications, from water purification to food and pharmaceutical industries. Despite all the research efforts so far, fouling still represents an unsolved problem. The complex interplay of physical and chemical mechanisms governing its evolution is indeed yet to be fully unraveled and the role played by foulants’ properties or operating conditions is an area of active research where microfluidics can play a fundamental role. The aim of this review is to explore fouling through microfluidic systems, assessing the fundamental interactions involved and how microfluidics enables the comprehension of the mechanisms characterizing the process. The main mathematical models describing the fouling stages will also be reviewed and their limitations discussed. Finally, the principal dynamic investigation techniques in which microfluidics represents a key tool will be discussed, analyzing their employment to study fouling.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Membrane fouling in membrane bioreactors

殷峻,陈英旭

DOI: https://doi.org/10.3969/j.issn.1673-9108.2001.03.012

2001-01-01

Abstract:Membrane Bioreactor is a new high egficient wastewater treatment technology. Membrane fouling is an important consideration in the design and operation of membrane systems. Study progresses in the mechanisms resulting in fouling of membrane and related solutions are summarized and future developments are finally prospected.
Fouling-free ultrafiltration for humic acid removal

Hassan Younas,Jiahui Shao,Yiliang He,Gul Fatima,Syed Taseer Abbas Jaffar,Zohaib Ur Rehman Afridi

DOI: https://doi.org/10.1039/c8ra03810d

IF: 4.036

2018-01-01

RSC Advances

Abstract:Membrane fouling is a serious concern that significantly affects the membrane filtration process.

chemistry, multidisciplinary
Advanced Control Strategies of Membrane Fouling in Wastewater Treatment: A Review

Nabi Bakhsh Mallah,Ayaz Ali Shah,Abdul Majeed Pirzada,Imran Ali,Mohammad Ilyas Khan,Abdul Sattar Jatoi,Jeffrey L. Ullman,Rasool Bux Mahar

DOI: https://doi.org/10.3390/pr12122681

IF: 3.5

2024-11-29

Processes

Abstract:Reverse osmosis and microfiltration are two membrane-based separation techniques that have gained popularity over the past few decades. A fundamental barrier to improving the overall efficiency of membrane separation is membrane fouling. The accumulation of foulants causes a reduction in permeate flux, a loss of selectivity and permeability, and a reduction in the membrane's lifespan. Numerous chemical and physical surface changes have been studied to enhance membrane antifouling properties. Additionally, research has concentrated on creating membranes that use cutting-edge materials to improve their antifouling capability. This paper focuses on a wide-ranging and thorough analyses of the different types of fouling during wastewater treatment based on current research results regarding fouling control strategy and the potential of new methods for wastewater treatment. It is a further step forward for the evaluation of mitigation measures for emerging membrane fouling problems.

engineering, chemical
Flow and fouling in membrane filters: effects of membrane morphology

P. Sanaei,L. J. Cummings

DOI: https://doi.org/10.1017/jfm.2017.102

IF: 3.7

2017-04-06

Journal of Fluid Mechanics

Abstract:Membrane filters are used extensively in microfiltration applications. The type of membrane used can vary widely depending on the particular application, but broadly speaking the requirements are to achieve fine control of separation, with low power consumption. The solution to this challenge might seem obvious: select the membrane with the largest pore size and void fraction consistent with the separation requirements. However, membrane fouling (an inevitable consequence of successful filtration) is a complicated process, which depends on many parameters other than membrane-pore size and void fraction; and which itself greatly affects the filtration process and membrane functionality. In this work we formulate mathematical models that can (i) account for the membrane internal morphology (internal structure, pore size and shape, etc.); (ii) describe fouling of membranes with specific morphology; and (iii) make some predictions as to what type of membrane morphology might offer optimum filtration performance.

mechanics,physics, fluids & plasmas
Fouling and Chemical Cleaning of Microfiltration Membranes: A Mini-Review

Aysegul Gul,Jakub Hruza,Fatma Yalcinkaya

DOI: https://doi.org/10.3390/polym13060846

IF: 5

2021-03-10

Polymers

Abstract:Membrane fouling is one of the main drawbacks encountered during the practical application of membrane separation processes. Cleaning of a membrane is important to reduce fouling and improve membrane performance. Accordingly, an effective cleaning method is currently of crucial importance for membrane separation processes in water treatment. To clean the fouling and improve the overall efficiency of membranes, deep research on the cleaning procedures is needed. So far, physical, chemical, or combination techniques have been used for membrane cleaning. In the current work, we critically reviewed the fouling mechanisms affecting factors of fouling such as the size of particle or solute; membrane microstructure; the interactions between membrane, solute, and solvent; and porosity of the membrane and also examined cleaning methods of microfiltration (MF) membranes such as physical cleaning and chemical cleaning. Herein, we mainly focused on the chemical cleaning process. Factors affecting the chemical cleaning performance, including cleaning time, the concentration of chemical cleaning, and temperature of the cleaning process, were discussed in detail. This review is carried out to enable a better understanding of the membrane cleaning process for an effective membrane separation process.

polymer science
Membrane Fouling Control in Water Treatment

Yi-Li Lin

DOI: https://doi.org/10.3390/membranes12060551

IF: 4.562

2022-05-26

Membranes

Abstract:The stress of freshwater scarcity has become a severe problem worldwide and drives the development of technologies for water recycling and reuse [...]

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Direct Membrane Filtration (DMF) of municipal wastewater – A study on the prevention and remediation of fouling

Omer Khalid,Simon Gidstedt,Frank Lipnizki,Gregor Rudolph-Schöpping

DOI: https://doi.org/10.1016/j.jwpe.2024.106235

IF: 7

2024-10-07

Journal of Water Process Engineering

Abstract:Direct membrane filtration (DMF) has gained a lot of attention in recent years because of its potential to treat low-strength and low temperature wastewater, where biological based treatments are inefficient. However, fouling is a major concern which keeps this technique from being more widely used. The main aim of this study was to investigate membrane fouling, its mitigation approaches and the organic/nutrient retention during DMF of municipal wastewater by adjusting operational parameters and pretreating the sewage. In a laboratory-scale setup employing crossflow to mitigate fouling, both ultrafiltration and microfiltration membranes were utilized. Physicochemical pre-treatment of sewage with polyaluminum chloride and polyamide significantly inhibited membrane fouling and improved organics/nutrient retention. Subsequent experiments with physiochemically pre-treated sewage, using microfiltration and ultrafiltration separately, revealed that (i) an increase in crossflow velocity from 1 to 2 m s −1 improved filtration performance by reducing irreversible fouling, (ii) elevating transmembrane pressure from 0.18 to 0.4 bar increased both reversible and irreversible fouling, and (iii) periodic relaxation increased the extent of irreversible fouling, contributing to higher overall fouling in ultrafiltration. When employing DMF for sewage concentration, ultrafiltration demonstrated superior filtration performance and organics retention compared to microfiltration. Furthermore, through pre-precipitation and microsieving (100 μm) followed by DMF with ultrafiltration membranes, a remarkable removal efficiency of 92 % for chemical oxygen demand (COD), 98 % for total phosphorus (TP), and 100 % for total suspended solids (TSS) was achieved. By cleaning the fouled membranes using an alkaline cleaning solution (Ultrasil-10) at 50 °C, combined with a crossflow of 1 m s −1 , the permeability was completely restored. Overall, this study demonstrates that by optimizing operational settings and cleaning conditions, a sustainable DMF process for wastewater treatment with controlled membrane fouling and improved resource recovery can potentially be developed for upscaling. Short abstract This study investigated the effectiveness of direct membrane filtration for municipal wastewater treatment. It was found that physicochemical pre-treatment with polyaluminum chloride and polyamide significantly reduced membrane fouling and improved nutrient retention. Ultrafiltration membranes demonstrated superior performance and nutrient retention compared to microfiltration membranes. By optimizing operational parameters and cleaning conditions, a sustainable direct membrane filtration process with controlled fouling and improved resource recovery can be developed for wastewater treatment.

engineering, chemical, environmental,water resources
Antifouling membranes for sustainable water purification: strategies and mechanisms.

M. Elimelech,Zhongyi Jiang,Ya-nan Liu,Mingrui He,Yanlei Su,Xueting Zhao,Runnan Zhang

DOI: https://doi.org/10.1039/C5CS00579E

IF: 46.2

2016-10-24

Chemical Society Reviews

Abstract:One of the greatest challenges to the sustainability of modern society is an inadequate supply of clean water. Due to its energy-saving and cost-effective features, membrane technology has become an indispensable platform technology for water purification, including seawater and brackish water desalination as well as municipal or industrial wastewater treatment. However, membrane fouling, which arises from the nonspecific interaction between membrane surface and foulants, significantly impedes the efficient application of membrane technology. Preparing antifouling membranes is a fundamental strategy to deal with pervasive fouling problems from a variety of foulants. In recent years, major advancements have been made in membrane preparation techniques and in elucidating the antifouling mechanisms of membrane processes, including ultrafiltration, nanofiltration, reverse osmosis and forward osmosis. This review will first introduce the major foulants and the principal mechanisms of membrane fouling, and then highlight the development, current status and future prospects of antifouling membranes, including antifouling strategies, preparation techniques and practical applications. In particular, the strategies and mechanisms for antifouling membranes, including passive fouling resistance and fouling release, active off-surface and on-surface strategies, will be proposed and discussed extensively.

Medicine,Engineering,Environmental Science
Recent Mitigation Strategies on Membrane Fouling for Oily Wastewater Treatment

Nur Fatihah Zulkefli,Nur Hashimah Alias,Nur Shafiqah Jamaluddin,Norfadhilatuladha Abdullah,Shareena Fairuz Abdul Manaf,Nur Hidayati Othman,Fauziah Marpani,Muhammad Shafiq Mat-Shayuti,Tutuk Djoko Kusworo

DOI: https://doi.org/10.3390/membranes12010026

IF: 4.562

2021-12-25

Membranes

Abstract:The discharge of massive amounts of oily wastewater has become one of the major concerns among the scientific community. Membrane filtration has been one of the most used methods of treating oily wastewater due to its stability, convenience handling, and durability. However, the continuous occurrence of membrane fouling aggravates the membrane’s performance efficiency. Membrane fouling can be defined as the accumulation of various materials in the pores or surface of the membrane that affect the permeate’s quantity and quality. Many aspects of fouling have been reviewed, but recent methods for fouling reduction in oily wastewater have not been explored and discussed sufficiently. This review highlights the mitigation strategies to reduce membrane fouling from oily wastewater. We first review the membrane technology principle for oily wastewater treatment, followed by a discussion on different fouling mechanisms of inorganic fouling, organic fouling, biological fouling, and colloidal fouling for better understanding and prevention of membrane fouling. Recent mitigation strategies to reduce fouling caused by oily wastewater treatment are also discussed.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Ceramic Microfiltration Membranes in Wastewater Treatment: Filtration Behavior, Fouling and Prevention

Mohammed Wali Hakami,Abdullah Alkhudhiri,Sirhan Al-Batty,Myrto-Panagiota Zacharof,Jon Maddy,Nidal Hilal

DOI: https://doi.org/10.3390/membranes10090248

IF: 4.562

2020-09-22

Membranes

Abstract:Nowadays, integrated microfiltration (MF) membrane systems treatment is becoming widely popular due to its feasibility, process reliability, commercial availability, modularity, relative insensitivity in case of wastewater of various industrial sources as well as raw water treatment and lower operating costs. The well thought out, designed and implemented use of membranes can decrease capital cost, reduce chemical usage, and require little maintenance. Due to their resistance to extreme operating conditions and cleaning protocols, ceramic MF membranes are gradually becoming more employed in the drinking water and wastewater treatment industries when compared with organic and polymeric membranes. Regardless of their many advantages, during continuous operation these membranes are susceptible to a fouling process that can be detrimental for successful and continuous plant operations. Chemical and microbial agents including suspended particles, organic matter particulates, microorganisms and heavy metals mainly contribute to fouling, a complex multifactorial phenomenon. Several strategies, such as chemical cleaning protocols, turbulence promoters and backwashing with air or liquids are currently used in the industry, mainly focusing around early prevention and treatment, so that the separation efficiency of MF membranes will not decrease over time. Other strategies include combining coagulation with either inorganic or organic coagulants, with membrane treatment which can potentially enhance pollutants retention and reduce membrane fouling.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Antifouling membranes for oily wastewater treatment: interplay between wetting and membrane fouling

Shilin Huang,Robin H. A. Ras,Xuelin Tian

DOI: https://doi.org/10.48550/arXiv.1811.11275

2018-10-12

Soft Condensed Matter

Abstract:Oily wastewater is an extensive source of pollution to soil and water, and its harmless treatment is of great importance for the protection of our aquatic ecosystems. Membrane filtration is highly desirable for removing oil from oily water because it has the advantages of energy efficiency, easy processing and low maintenance cost. However, membrane fouling during filtration leads to severe flux decline and impedes long-term operation of membranes in practical wastewater treatment. Membrane fouling includes reversible fouling and irreversible fouling. The fouling mechanisms have been explored based on classical fouling models, and on oil droplet behaviors (such as droplet deposition, accumulation, coalescence and wetting) on the membranes. Membrane fouling is dominated by droplet-membrane interaction, which is influenced by the properties of the membrane (e.g., surface chemistry, structure and charge) and the wastewater (e.g., compositions and concentrations) as well as the operation conditions. Typical membrane antifouling strategies, such as surface hydrophilization, zwitterionic polymer coating, photocatalytic decomposition and electrically enhanced antifouling are reviewed, and their cons and pros for practical applications are discussed.

Fouling in Membrane Filtration and Remediation Methods

Review of New Approaches for Fouling Mitigation in Membrane Separation Processes in Water Treatment Applications

Microscopic Mechanism Of Membrane Fouling In Micro-Filtration

A Comprehensive Review on Membrane Fouling: Mathematical Modelling, Prediction, Diagnosis, and Mitigation

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Fouling and its control in membrane distillation—A review

A review of recent advance in fouling mitigation of NF/RO membranes in water treatment: pretreatment, membrane modification, and chemical cleaning

Outlining the Roles of Membrane-Foulant and Foulant-Foulant Interactions in Organic Fouling During Microfiltration and Ultrafiltration: A Mini-Review

Fouling and Cleaning of Microfiltration Membrane in Municipal Wastewater Reclamation.

Membrane Fouling Phenomena in Microfluidic Systems: From Technical Challenges to Scientific Opportunities

Membrane fouling in membrane bioreactors

Fouling-free ultrafiltration for humic acid removal

Advanced Control Strategies of Membrane Fouling in Wastewater Treatment: A Review

Flow and fouling in membrane filters: effects of membrane morphology

Fouling and Chemical Cleaning of Microfiltration Membranes: A Mini-Review

Membrane Fouling Control in Water Treatment

Direct Membrane Filtration (DMF) of municipal wastewater – A study on the prevention and remediation of fouling

Antifouling membranes for sustainable water purification: strategies and mechanisms.

Recent Mitigation Strategies on Membrane Fouling for Oily Wastewater Treatment

Ceramic Microfiltration Membranes in Wastewater Treatment: Filtration Behavior, Fouling and Prevention

Antifouling membranes for oily wastewater treatment: interplay between wetting and membrane fouling