An Efficient Analysis Method of Aluminum Alloy Helicopter Fuselage Projectile Damage Based on Projectile Breakdown Theory

Xing,Tan,Yang,Yong,Yu,Zhou

DOI: https://doi.org/10.3390/aerospace11060500

IF: 2.66

2024-06-21

Aerospace

Abstract:The shape and structure of helicopter fuselage are complex, and it is difficult for a finite element method (FEM) to investigate helicopter fuselage projectile damage in a multi-projectile environment. An efficient analysis method for helicopter fuselage projectile damage is then proposed by coupling the projectile breakdown theory, which is derived from the existing empirical formula for penetrating ductile metals, and the model of projectile impact. Then, the characteristics of the helicopter fuselage impact coordinate, residual velocity, and fuselage damage area under a multi-projectile attack are investigated. The results show that the predicted residual velocities agree with the experiments. The maximum errors of the residual velocity and the fuselage damage area are 4.7% and 9.56%, respectively. Compared with the FEM, the computational time of the proposed method is reduced by 92.1%, and its efficiency is obviously improved. As the incidence angle increases, the residual velocity decreases, and the damage area increases. When the incidence angle of the projectile body is large, the projectile body cannot penetrate the surface of the fuselage, resulting in flume skid damage and a large area of damage.

engineering, aerospace

What problem does this paper attempt to address?

This paper attempts to address the issue of efficiently analyzing ballistic damage to helicopter aluminum alloy fuselages in a multi-projectile environment. Specifically, the paper proposes an efficient analysis method based on projectile penetration theory and a projectile collision calculation model to overcome the long computation time of traditional Finite Element Methods (FEM) when dealing with complex structures and multi-projectile environments.

### Background and Problem
- **Background**: In modern local wars, helicopters operating at low altitudes are susceptible to ground fire attacks. Rapid assessment of ballistic damage is crucial for battlefield maintenance of helicopters.
- **Problem**: Although traditional FEM can simulate the damage of projectiles to helicopter fuselages in detail, it takes too long to compute in multi-projectile environments and complex structures, making efficient damage assessment difficult.

### Solution
- **Method**: The paper proposes an efficient analysis method combining projectile penetration theory and a projectile collision calculation model.
- **Steps**:
1. **Model Establishment**: Calculate the residual velocity and damage area of the projectile using projectile penetration theory.
2. **Collision Point Calculation**: Determine the collision point of the projectile using a 3D helicopter model.
3. **Damage Assessment**: Calculate the residual velocity and damage area of the projectile after impact based on the material parameters and thickness at the impact point.

### Experimental Validation
- **Experimental Data**: Experimental data from the literature were selected for validation. The experiment used a two-stage gas gun system to launch projectiles with a diameter of 12.7 mm, a length of 75 mm, a hemispherical front end, a mass of 78 g, and made of steel.
- **Results**: The proposed efficient analysis method matched well with the experimental results, with a maximum error of 2.3%.

### Results and Discussion
- **Residual Velocity and Damage Area**: Under different incidence angles, the residual velocity and damage area calculated by the proposed efficient analysis method were consistent with the FEM results, with maximum errors of 4.7% and 9.56%, respectively.
- **Computational Efficiency**: Compared to FEM, the proposed efficient analysis method reduced computation time by 92.1%, significantly improving computational efficiency.
- **Damage Characteristics**: As the incidence angle increases, the residual velocity of the projectile decreases, and the damage area increases. When the incidence angle is large, the projectile cannot completely penetrate the fuselage surface, resulting in sliding friction damage and an increased damage area.

### Conclusion
- **Method Effectiveness**: The proposed efficient analysis method can accurately predict the residual velocity of projectiles at different initial speeds, with a significant reduction in computation time.
- **Application Prospects**: This method has important application value for the rapid assessment of helicopter fuselage damage in multi-projectile environments, helping to improve the efficiency of battlefield maintenance for helicopters.