Abstract:The failure of composite laminates under cyclic fatigue loads is complex, as multiple failure mechanisms are in play at different scales and interact with each other. Predicting the remaining fatigue life as well as the residual capacities of a composite laminate or component is crucial, particularly for safety-critical applications. A progressive fatigue model is proposed to describe the catastrophic failure of open-hole laminates under tensile cyclic fatigue. To represent both intra-laminar and inter-laminar damage, a combination of a continuum damage mechanics model (CDM) and a discrete cohesive zone model (CZM) is implemented in the finite element (FE) software Abaqus. The CDM combines fibre- and matrix-dominated S-N curves with the Palmgren–Miner accumulation rule and Hashin’s residual strength to form a fatigue failure criterion differentiating between fibre failure (FF) and matrix failure (MF). The CZM implemented in this work is the CF20 model proposed by NASA. Fatigue cycling is simulated using an external cycle-jump scheme, where the stiffness degradation is conducted between the FE simulations outside of the implicit solver [90/0] s. Glass fibre reinforced polymer (GFRP) open-hole specimens were tested in tensile cyclic fatigue at a load ratio of 0.1. The experiments were reproduced numerically and the results compared. After calibration of a set of parameters based on one load level, the model was able to reproduce the experimental S-N curve very well, predicting a slope of −0.10, while the experimental value was −0.11. The failure sequence of the laminate was also successfully reproduced. The growth of the split from the hole, and its interaction with inter-laminar delamination, was successfully captured. The proposed approach was able to describe the fatigue failure of an open-hole laminate with a minimal set of material inputs using a simplified fatigue damage model while avoiding convergence issues.

Modelling Pre-fatigue, Low-velocity Impact and Fatigue behaviours of Composite Helicopter Tail Structures under Multipoint Coordinated Loading Spectrum

Modelling pre-fatigue, low-velocity impact and post-impact fatigue behaviours of composite helicopter tail structures under multipoint coordinated loading spectrum

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Finite element modeling and fatigue life prediction of helicopter composite tail structure under multipoint coordinated loading spectrum

Progressive failure analysis of 2D woven composites at the meso-micro scale

Progressive damage modelling and fatigue life prediction of Plain-weave composite laminates with Low-velocity impact damage

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Strength and stiffness degradation modeling and fatigue life prediction of composite materials based on a unified fatigue damage model

Numerical investigation of the low-velocity impact damage resistance and tolerance of composite laminates with preloads

An improved composite impact damage model and bird-striking damage analysis with smoothed particle hydrodynamics-finite element method

A New Three-Dimensional Progressive Damage Model for Fiber-Reinforced Polymer Laminates and Its Applications to Large Open-Hole Panels

Integrating variable wind load, aerodynamic, and structural analyses towards accurate fatigue life prediction in composite wind turbine blades

A modified nonlinear cumulative damage model for combined high and low cycle fatigue life prediction

DAMAGE OF COMPOSITE UNDER LOW-VELOCITY IMPACT AND APPLICATION OF MECHANICAL EQUIVALENT MODEL

Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates

Development and experimental verification of an advanced 3D elastoplastic progressive damage model for composite materials

Three-dimensional progressive damage models for cohesively bonded composite π joint

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Progressive fatigue damage modeling of laminated composites using strain-based failure criteria

Visualization and interpretation of the impact failure behavior of textile composites using a highly efficient Meso-FE model