Abstract:The development of longer lasting and faster charging lithium-ion batteries (LIBs) remains a critical engineering priority for the U.S. Department of Energy. To enable the next-generation technology, it is essential to understand the nature and extent of materials failure during battery operation. Under fast-charging conditions, it has been shown that graphite particles, which comprise the active material of the LIB anode, suffer irreversible material degradation that limits ultimate battery performance. This damage to the graphite manifests as turbostratic lattice disorder, severe morphological roughening, and anode swelling [1]. While these findings are essential to understand the nature of damage to the anode under fast-charge conditions, it remains to be seen whether such damage occurs at slower rates or is instead accelerated by extreme rate conditions and aging. In this regard, the recent advances in high-resolution electron microscopy (HREM) and four-dimensional scanning transmission electron microscopy (4D-STEM) methods provide the essential tools to enable nanoscopic quantification of battery degradation [2], [3]. In this work, we use advanced analytical electron microscopy and diffraction strategies to analyze nanoscopic degradation of graphite anode material under different cycling rate and aging conditions. The results of this work will demonstrate novel strategies for identifying nanoscale structural disorder that arise in battery materials as well as provide key understanding of graphite material failure to aid in the development of high-performance anode materials. We study (in post-mortem) the graphite particle cross-sections harvested from LIBs at different aging conditions for both C/2 (i.e., 2 hours to full charge) and 6C (i.e., 10 minutes to full charge) rate. At the nano- to atomic-scale, we rely primarily on aberration-corrected STEM for imaging and diffraction acquisition for each sample (see Figure 1 for the results). High resolution imaging reveals the extent of lattice disorder and amorphous character localized at graphite pore edges. The 4D-STEM data helps to further quantify the extent and distribution of nanoscale structural disorder (including permanent strain and turbostratic disorder). The experimental methods employed to acquire the datasets and the strategies employed to interpret the data to understand the nature of the resulting damage, including recent progress into Cepstral STEM, will be discussed. Additional supporting evidences of graphite disorder from Raman spectroscopy studies and rate-dependent anode swelling from scanning electron microscopy will also be presented. References : [1] S. Pidaparthy, M.-T. F. Rodrigues, J.-M. Zuo, and D. P. Abraham, "Increased Disorder at Graphite Particle Edges Revealed by Multi-length Scale Characterization of Anodes from Fast-Charged Lithium-Ion Cells," J. Electrochem. Soc., vol. 168, no. 10, p. 100509, 2021. [2] J.-M. Zuo et al., "Data-Driven Electron Microscopy: Electron Diffraction Imaging of Materials Structural Properties," arXiv Prepr. arXiv2110.02070, 2021. [3] E. Padgett et al., "The exit-wave power-cepstrum transform for scanning nanobeam electron diffraction: robust strain mapping at subnanometer resolution and subpicometer precision," Ultramicroscopy, vol. 214, p. 112994, 2020. Acknowledgements: SP acknowledges support from the U. S. Department of Energy Graduate Student Research (SCGSR) program. The SCGSR program is administered by the Oak Ridge Institute for Science and Education for the U. S. Department of Energy under contract number DE‐SC0014664. This work was carried out in part in the Materials Research Laboratory Central Research Facilities, University of Illinois. DA and MTFR acknowledge support from DOE's Vehicle Technologies Office. This document has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory ("Argonne"). Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. Figure 1

Quantifying the Temperature Dependence of the Multi-Species, Multi-Reaction Model: Part II. Estimation of Entropy Coefficient for Meso-Carbon Micro-Bead Graphite

Phenomenological Modeling for Magneto-Mechanical Couplings of Martensitic Variant Reorientation in Ferromagnetic Shape Memory Alloys

Quantifying the Entropy and Enthalpy of Insertion Materials for Battery Applications Via the Multi-Species, Multi-Reaction Model

Inference for Stochastic Chemical Kinetics Using Moment Equations and System Size Expansion

Pore-to-meter Scale Modeling of Heat and Mass Transport Applied to Thermal Energy Storage: How Local Thermal and Velocity Fluctuations Affect Average Thermal Dispersivity

Thermomechanical Modeling of Scanning Joule Expansion Microscopy Imaging of Single-Walled Carbon Nanotube Devices

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

Kinetic Modeling of High-Pressure Pyrite Oxidation with Parameter Estimation and Reliability Analysis Using the Markov Chain Monte Carlo Method

Corrigendum: Application of the Multi-Species, Multi-Reaction Model to Coal-Derived Graphite for Lithium-Ion Batteries ]

(Invited) Effect of Temperature on Lithium-Ion Battery Voltage Response and How to Model It in the Mechanistic Modeling Approach

A model for understanding the temperature change of an alternate hot and cold micro-band graphite electrode

Investigation of Graphite Electrode Degradation in Lithium-Ion Cells Using 4D-STEM

(Invited) Estimating OCP-Temperature Dynamics for Determining Lithium-Ion Battery Entropy Coefficients

Modeling Methodology for Thermal Stability Factor in Spin Transfer Torque Magneto-Resistive Random Access Memories

Multiscale Entropy Analysis of the Portevin-Le Chatelier Effect in an Al-2.5%Mg Alloy

Heat Generation in Lithium Iron Phosphate/Graphite Batteries: Simulation with Validation through Isothermal and Adiabatic Calorimetric Measurements

Mesoscale Effects in the Extraction of the Solid-State Lithium Diffusion Coefficient Values of Battery Active Materials: Physical Insights from 3D Modeling

Thermodynamics of Mg–Al Order-Disorder Reaction in MgAl2O4-Spinel: Constrained by Prolonged Annealing Experiments at 773–1123 K

A numerical study of mechanical degradation of Carbon-Coated Graphite Active Particles in Li-ion battery anodes

Thermal fluctuation noise in Mo/Au superconducting transition-edge sensor microcalorimeters

Measurement of Enthalpy and Entropy of a Model Electrocatalyst for the Oxygen Evolution Reaction