Abstract:The precise assessment of the kinetic properties of graphite is crucial for the design of the material and the development of electrochemical models for lithium-ion batteries. However, conventional evaluation methods using composite electrodes fall short in excluding the influence of its porous structure and evaluating the influence of particle shape on kinetic behavior. In this work, we elucidate the impact of non-spherical morphology on kinetic behavior of single artificial graphite particle, employing the single-particle microelectrode technique. Three single artificial graphite particles with different sizes are pre-cycled and exhibit outstanding rate capability, maintaining a maximum capacity retention of 78.1 % at 200 C. Further, exchange current density and diffusion coefficients are determined through Tafel plots and the potentiostatic intermittent titration technique (PITT), respectively. It is found that the particle with a higher exposure of edge planes present elevated exchange current density and diffusion coefficients. Considering that the graphite particles typically feature an ellipsoidal rather than spherical shape, we propose an approach based on an ellipsoidal diffusion model for extracting diffusion coefficients. This model takes into account the non-spherical morphology of graphite, addressing the limitations inherent in the geometric assumptions of previous methods. The average relative error between the diffusion coefficients derived from the ellipsoidal diffusion model and the previous method using spherical assumptions is 215%, indicating that accurately depicting the shape of ellipsoidal graphite particles in the model is crucial for obtaining correct estimates of kinetic parameters. This study offers direct experimental evidence of superior kinetic behavior of edge planes over basal planes. To leverage this characteristic, it is recommended to employ an out-of-plane aligned architecture for composite electrodes using novel techniques, e.g., 3D printing or magnetic alignment techniques.

Corrigendum: Application of the Multi-Species, Multi-Reaction Model to Coal-Derived Graphite for Lithium-Ion Batteries ]

Theoretical and Experimental Performance Characterization of Battery Anodes Comprised of Coal Derived Graphite

Gas-phase Oxidation Modification Strategy of Spent Graphite from Spent LiFePO4 with Enhanced Initial Coulombic Efficiency for Lithium-Ion Battery Anodes

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition (vol 15, Pg 7949, 2024)

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Correction: The examination of graphene oxide for rechargeable lithium storage as a novel cathode material

Corrigendum: Revealing the Role of Lithium Carbonate at Lithium Metal Anodes Through Study of Gas-Reacted Interphases ]

Testing and Modeling the Mechanical Properties of the Granular Materials of Graphite Anode

Corrigendum: Highly Ordered Mesoporous NiCo2O4 As a High Performance Anode Material for Li-Ion Batteries

Graphitic Co‐Products of Clean Hydrogen Production Enabling High‐Rate‐Performance Dual‐Carbon Batteries (Adv. Energy Mater. 22/2023)

Correction: Large-scale synthesis of ultrafine Fe 3 C nanoparticles embedded in mesoporous carbon nanosheets for high-rate lithium storage

Erratum: Elementary Reaction Kinetic Model of An Anode-supported Syngas Fueled Solid Oxide Fuel Cell Considering The Carbon Deposition Effect [ECS Trans. 103 (1) 949-957 (2021)]

Correction: Mesoporous polyvalent Ni–Mn–Co–O composite nanowire arrays towards integrated anodes boosting high-properties lithium storage

Graphene‐Supported Nitrogen and Boron Rich Carbon Layer for Improved Performance of Lithium–Sulfur Batteries Due to Enhanced Chemisorption of Lithium Polysulfides

CorrigendumCorrigendum to “improving the Synthesis of Single-Walled Carbon Nanotubes by Pulsed Arc Discharge in Air by Preheating the Catalysts” [carbon 46 (2008) 1819–1822]

Improving Natural Microcrystalline Graphite Performances by a Dual Modification Strategy toward Practical Application of Lithium Ion Batteries

Corrigendum: Effect of PVdF Distribution on Properties and Performance of Dry Spray-Coated Graphite Electrodes for Lithium-Ion Batteries for Electric Vehicle Applications

Modification of Natural Graphite for Lithium Ion Batteries

Author Correction: Scalable synthesis of hierarchically structured carbon nanotube–graphene fibres for capacitive energy storage

Elucidating the Impact of Non-Spherical Morphology on Kinetic Behavior of Graphite Using Single-Particle Microelectrode