Abstract:Fine particulate matter, generally known as PM2.5 ;has great impact on air quality and human health. Although closing external windows can help prevent outdoor PM2.5 form going indoors, many studies have shown that a significant number of particles can still pass through the building fa?ade through the cracks around the window. In order to quantify the influence of external window crack characteristic and relevant parameters ( such as room dimension) on the indoor ρ( PM2.5 ) ;a longitudinal study monitoring outdoor ρ( PM2.5 ) ;indoorρ( PM2.5 ) and important outdoor meteorological parameters was carried out in six offices located in the Dongcheng and Chaoyang District in Beijing, China. In addition, a model was developed from an existing model developed by the authors, based on two-month field-measured data from five unoccupied offices located in the central area of Beijing, and was then validated against a new dataset measured at another sampling site. In this model, a comprehensive structure characteristic coefficient, AP ;was adopted to reflect the influence of external window crack structure and room dimension. Further, this study adopted a method that can be used to calculate the value of Ak based on the building's external window crack structure and room dimension, which are easier to be obtained. The model is capable of quantifying indoor ρ( PM2.5 ) based on instant outdoor ρ( PM2.5 ) ;with consideration of impact from external window crack characteristics, room dimension and outdoor meteorological conditions, i. e. outdoor wind speed and relative humidity. The model was validated by measurement data. The prediction results showed that under the same outdoor conditions, such asρ( PM2.5 ) and temperature, indoor air quality forρ( PM2.5 ) was significantly affected by external window crack structure. The I∕O ratio〔the ratio between indoorρ( PM2.5 ) and outdoorρ( PM2.5 )〕 was generally within 0. 4 and 0. 7. Additionally, when increasing the window crack height by 50% or the window crack depth by 50%, the corresponding I∕O could be decreased by 33. 6% and 31. 9% respectively. The study shows that narrower window crack height and deeper window crack depth with higher window air-tightness can control indoorρ( PM2.5 ) well under the condition of infiltration.

A new PM2.5-based CADR method to measure air infiltration rate of buildings

Comparison of indoor concentration of PM2.5 between different residences

A Convenient Method to Assess Air Infiltration Rate Using Particle Mass Balance Principle

A New PM2.5-based PM-up Method to Measure Non-Mechanical Ventilation Rate in Buildings

Air change rate measurements using indoor/outdoor ratio of pm2.5

A New Method to Assess Infiltration Rates in Large Shopping Centers

A New Method to Assess the Infiltration Rate in Large Commercial Complex in Beijing, China

Estimating long‐term time‐resolved indoor PM 2.5 of outdoor and indoor origin using easily obtainable inputs

Field Study of Infiltration Rate and Its Influence on Indoor Air Quality in an Apartment

Estimating Long-Term Time-Resolved Indoor PM2.5 of Outdoor and Indoor Origin Using Easily Obtainable Inputs.

Characterizing outdoor infiltration and indoor contribution of PM2.5 with citizen-based low-cost monitoring data

A Methodology for Predicting PM2.5 Penetration and Deposition Based on the Air Infiltration Through the Window Gaps

Monitoring principle and methodology for air change flow in indoor air

Measurement of Air Exchange Rates in Different Indoor Environments Using Continuous CO2 Sensors.

Determination of Key Parameters (air Exchange Rate, Penetration Factor and Deposition Rate) for Selecting Residential Air Cleaners under Different Window Airtightness Levels

Dynamic Characteristics in Air Infiltration Rate With Respect to Atmospheric PM2.5 Pollution

Air Infiltration Rate Distributions of Residences in Beijing

Measuring PM2.5 Deposition Rates under Different Natural Ventilation Rates in Two Classrooms

Modeling the Influence of Building Structure on Indoor PM 2 5 Mass Concentration Due to Infiltration

The Evaluation Model of PM2.5 Penetration and Deposition Based on the Air Infiltration Through the Window Gaps

Comparison of the Application of Three Methods for the Determination of Outdoor PM2.5 Design Concentrations for Fresh Air Filtration Systems in China