Abstract:Performance of superconducting resonators, particularly cavities for particle accelerators and micro cavities and thin film resonators for quantum computations and photon detectors has been improved substantially by recent materials treatments and technological advances. As a result, the niobium cavities have reached the quality factors $Q\sim 10^{11}$ at 1-2 GHz and 1.5 K and the breakdown radio-frequency (rf) fields $H$ close to the dc superheating field of the Meissner state. These advances raise the question whether the state-of-the-art cavities are close to the fundamental limits, what these limits actually are, and to what extent the $Q$ and $H$ limits can be pushed by the materials nano structuring and impurity management. These issues are also relevant to many applications using high-Q thin film resonators, including single-photon detectors and quantum circuits. This topical review outlines basic physical mechanisms of the rf nonlinear surface impedance controlled by quasiparticles, dielectric losses and trapped vortices, as well as the dynamic field limit of the Meissner state. Sections cover ways of engineering an optimum quasiparticle density of states and superfluid density to reduce rf losses and kinetic inductance by pairbreaking mechanisms related to magnetic impurities, rf currents, and proximity-coupled metallic layers at the surface. A section focuses on mechanisms of residual surface resistance which dominates rf losses at ultra low temperatures. Microwave losses of trapped vortices and their reduction by optimizing the concentration of impurities and pinning potential are also discussed.

Flux expulsion in niobium superconducting radio-frequency cavities of different purity and essential contributions to the flux sensitivity

Efficient expulsion of magnetic flux in superconducting RF cavities for high $Q_0$ applications

Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Flux Expulsion and Material Properties of Niobium Explored in 644-650 MHz Cavities

Role of microstructure on flux expulsion of superconducting radio frequency cavities

AMR Magnetic Sensors in Flux Expulsion Studies

Effect of Successive Heat Treatment on the Performance of Superconducting Radio Frequency Niobium Cavities

Evaluation of flux expulsion and flux trapping sensitivity of srf cavities fabricated from cold work Nb sheet with successive heat treatment

Fluxon-Induced Losses in Niobium Thin-Film Cavities Revisited

The Effect of Mechanical Cold Work on the Magnetic Flux Expulsion of Niobium

Magnetic Flux Dynamics in Horizontally Cooled Superconducting Cavities

Flux pinning characteristics in cylindrical ingot niobium used in superconducting radio frequency cavity fabrication

Depinning of Trapped Magnetic Flux in Bulk Niobium SRF Cavities

Evaluation of predictive correlation between flux expulsion and grain growth for superconducting radio frequency cavities

Influence of material parameters on the performance of niobium based superconducting RF cavities

Tuning microwave losses in superconducting resonators

Impact of medium temperature heat treatment on flux trapping sensitivity in SRF cavities

Catastrophic magnetic flux avalanches in NbTiN superconducting resonators

Cooling Dynamics Through Transition Temperature of Niobium SRF Cavities Captured by Temperature Mapping

High-Q operation of SRF cavities: The potential impact of thermocurrents on the RF surface resistance

Temperature, RF Field, and Frequency Dependence Performance Evaluation of Superconducting Niobium Half-Wave Cavity