Modified reagents for determination of urea and ammonia.

A. L. Chaney,E. P. Marbach

DOI: https://doi.org/10.1093/CLINCHEM/8.2.130

IF: 12.114

1962-04-01

Clinical Chemistry

Abstract:Combinations of reagents are described for the catalyzed indophenol reaction for the determination of ammonia, which produces a stable blue color. The procedure is adapted to the determination of urea after hydrolysis with urease.

Medicine,Chemistry

What problem does this paper attempt to address?

Colorimetric determination of urea using diacetyl monoxime with strong acids

Noah James Langenfeld,Lauren Elizabeth Payne,Bruce Bugbee

DOI: https://doi.org/10.1371/journal.pone.0259760

IF: 3.7

2021-11-08

PLoS ONE

Abstract:Urea is a byproduct of the urea cycle in metabolism and is excreted through urine and sweat. Ammonia, which is toxic at low levels, is converted to the safe storage form of urea, which represents the largest efflux of nitrogen from many organisms. Urea is an important nitrogen source in agriculture, is added to many industrial products, and is a large component in wastewater. The enzyme urease hydrolyzes urea to ammonia and bicarbonate. This reaction is microbially mediated in soils, hydroponic solutions, and wastewater recycling and is catalyzed in vivo in plants using native urease, making measurement of urea environmentally important. Both direct and indirect methods to measure urea exist. This protocol uses diacetyl monoxime to directly determine the concentration of urea in solution. The protocol provides repeatable results and stable reagents with good color stability and simple measurement techniques for use in any lab with a spectrophotometer. The reaction between diacetyl monoxime and urea in the presence of sulfuric acid, phosphoric acid, thiosemicarbazide, and ferric chloride produces a chromophore with a peak absorbance at 520 nm and a linear relationship between concentration and absorbance from 0.4 to 5.0 mM urea in this protocol. The lack of detectable interferences makes this protocol suitable for the determination of millimolar levels of urea in wastewater streams and hydroponic solutions.

multidisciplinary sciences
Study on the Synthesis of N, N'-Bis(4-nitropheoyl)urea

Mei-hua ZHOU,Xiao-lin ZHANG,Min LIU,Xin-zhi CHEN

DOI: https://doi.org/10.3969/j.issn.0367-6358.2005.06.009

2005-01-01

Abstract:N,N'-Bis(4-nitrophenyl)urea was prepared by reacting p-nitroaniline with urea in the presence of DMF as solvent at refluxing temperature. The prepared product was analyzed by liquid chromatography. The purity of the product was above 98.00% and the yield was 80.30%. The optimal ratio of the reactants was p-nitroaniline: urea: concentrated hydrochloric acid=1.00∶1.00∶1.25, and the optimal reaction time was 5 h for 41.4 g(0.3 mol) p-nitroaniline under reflux temperature(adding the urea in batches within 1.0 h).
Determination of Ammonium Nitrogen in Fermentation Broth Through Indophenol Blue Reaction

XIE Zhi-peng,XU Zhi-nan,ZHENG Jian-Ming,CEN Pei-lin

DOI: https://doi.org/10.3785/j.issn.1008-973x.2005.03.026

2005-01-01

Abstract:A novel method for quantitative determinating of ammonium nitrogen was proposed to assay the nitrogen source in the fermentation industry by using the indophenol blue reaction. Optimizing the color reaction time, color stability conditions and the adding order of reactants, the correlation between the ammonium nitrogen concentration and the optical density was investigated. The method was validated through the intra-, inter-day repeatability tests and the recovery test, and determined the ammonium nitrogen concentration during the fermentation process of mildiomycin and S-adenosylmethionine. Results show that in the range of 0~7()mg/L, ammonium nitrogen concentration is significantly linear with the optical density of the reaction solution at 625()nm, and correlation coefficient is 0.998()6. The method has highly precise, accurate and is sensitive to detect subtle change of nitrogen source during the late phase of fermentation. The proposed method facilitate the adjustment of fermentation control strategy and the improvement of productivity.
Determination of Medium Concentration Urea in Solution by P-Dimethylaminobenzaldehyde Colorimetry

刘志刚,赵庆良,孙丽欣,邱微

DOI: https://doi.org/10.3321/j.issn:0367-6234.2008.08.008

2008-01-01

Abstract:In order to provide an easy and rapid method for measuring urea concentration in solution,the p-dimethylaminobenzaldehyde(PDAB) colorimetry was studied.The analysis conditions,characteristics,the analysis range of PDAB colorimetry for urea,as well as the influence of sodium chloride(NaCl) and ammonium nitrogen concentration on the determination method were all tested.The results showed that the optimum wavelength was 422 nm,the reaction time was 10 min,and the reaction regent ratio of PDAB(w/g),oil of vitriol(V/mL) and absolute alcohol(V/mL) was 4:4:96.Under these determination conditions,the analysis range of urea concentration was 8.8 to 107 mg/L.When the concentration of ammonium nitrogen was less than 300 mg/L and that of NaCl was between 400 and 8000 mg/L,the good results were also obtained.Therefore,this method is suitable to determine the medium urea concentration in solution,which contains higher concentration of ammonium nitrogen or NaCl,and it is quick,stable and easy to operate.
Colorimetric Detection of Urea, Urease, and Urease Inhibitor Based on the Peroxidase-Like Activity of Gold Nanoparticles.

Hao-Hua Deng,Guo-Lin Hong,Lin,Ai-Lin Liu,Xing-Hua Xia,Wei Chen

DOI: https://doi.org/10.1016/j.aca.2016.02.008

IF: 6.911

2016-01-01

Analytica Chimica Acta

Abstract:Herein, we reported for the first time that gold nanoparticles-catalyzed 3,3',5,5'-tetramethylbenzidine-H2O2 system can serve as an ultrasensitive colorimetric pH indicator. Gold nanoparticles acted as a catalyst and imitated the function of horseradish peroxidase. The absorbance at 450 nm of the yellow-color product in the catalytic reaction exhibited a linear fashion over the pH range of 6.40-6.60. On the basis of this property, we constructed a novel sensing platform for the determination of urea, urease, and urease inhibitor. The limit of detection for urea and urease was 5 μM and 1.8 U/L, respectively. The half-maximal inhibition value IC50 of acetohydroxamic acid was found to be 0.05 mM. Urea in human urine and urease in soil were detected with satisfied results.
A-084 Performance evaluation of Sentinel Diagnostics' Ammonia Ultra assay on Beckman Coulter AU/DxC AU Systems

S Brambilla,A Barazzutti,F Bordonaro,A Coghi,E Fusi,R Lucini,J Santos Cruz

DOI: https://doi.org/10.1093/clinchem/hvae106.083

IF: 12.114

2024-10-27

Clinical Chemistry

Abstract:BackgroundThe analytical performances of the Ammonia Ultra assay for in vitro quantitative enzymatic determination of Ammonia in human plasma have been evaluated on Beckman AU/DxC AU Systems. Ammonia, derived from the amino acids catabolism and from the action of intestinal bacteria on dietary proteins, is converted to non-toxic urea by the liver. An excess of ammonia can have toxic effects on the Central Nervous System with possible neurological disturbances. Elevated ammonia levels can also be observed in severe liver failure as may occur in Reye's syndrome, viral hepatitis or cirrhosis.MethodsAmmonia, in the presence of glutamate dehydrogenase (GLDH), combines with alpha-ketoglutarate and NADH to yield glutamate and NAD+. The decrease in 340 nm absorbance (NADH → NAD+) is proportional to the ammonia level in the examined plasma. The reagent contains excess of lactate dehydrogenase (LDH) to rapidly reduce endogenous pyruvate and avoid its interference with the assay system. Performances evaluation have been done following current CLSI guidelines protocols.Results3 calibrator lots and 2 reagent lots have been used for testing. For each test and among different combinations of reagents and calibrators, worst case has been reported in the table.ConclusionsAnalytical performances of Ammonia Ultra assay on Beckman AU/DxC AU Systems meet the requirements for its use as quantitative determination of Ammonia in human plasma and make this assay very suitable for the routine measurement of this analyte.

medical laboratory technology
Aminocoumaranones as Chemiluminescence Indicators of the Urease Activity and Hydrogen Peroxide

A. Yu. Smirnov,N. S. Baleeva,A. S. Mishin,Yu. A. Bogdanova,M. S. Baranov

DOI: https://doi.org/10.1134/s1068162024010035

2024-02-01

Russian Journal of Bioorganic Chemistry

Abstract:Objective: The phenomenon of chemiluminescence - the emission of light by a substance after oxidation - has been known for a very long time. Substances capable of chemiluminescence are actively used for the detection and quantitative determination of a wide variety of analytes. In this work, we studied the possibility of using 3-amino-coumaranones for the detection of hydrogen peroxide and urease activity study. Methods: In this work, we synthesized a series of 3-amino-coumaran-2-one derivatives, which can be divided into two groups: amide derivatives and urea derivatives. The optical and chemiluminescent properties of all the obtained compounds were studied under various conditions. Results and Discussion: In this work, a series of 3-amino-coumaranones was synthesized. It has been found that amide derivatives and derivatives of asymmetrically substituted ureas have significant chemiluminescence under various conditions. The introduction of the electron-donor groups in the coumaranone moiety and increasing of the conjugated π-system of coumaranones allow to shift 30–40 nm of the chemiluminescence maxima to the long-wavelength region. For N,N-disubstituted unsymmetrical urea derivatives it is shown that the luminescence intensity can be different under various conditions. It has been shown that derivatives of N,N-disubstituted unsymmetrical ureas can be used for the determination of hydrogen peroxide, and some compounds, due to their bright luminescence in the presence of urease, can be used as indicators of its enzymatic activity. Conclusions: We showed that some 3-amino-coumaranones can be used for detecting the urease and hydrogen peroxide.

biochemistry & molecular biology,chemistry, organic
Manual Salicylate-Hypochlorite Procedure for Determination of Ammonia in Kjeldahl Digests

Helen E Fukumoto,George W Chang

DOI: https://doi.org/10.1093/jaoac/65.5.1076

1982-09-01

Journal of AOAC International

Abstract:Abstract The determination of nitrogen in Kjeldahl digests of urine and feces has been simplified by using a manual spectrophotometric method with salicylate and hypochlorite. It neither involves the hazards of the phenol-hypochlorite method, nor requires an automated analyzer. We determined the conditions which minimize the need for precise timing and neutralization of acidic digests and obtained coefficients of variation of about 0.8%. Agreement between the spectrophotometric method and the conventional micro-Kjeldahl method was excellent; a correlation coefficient of 0.9992 and a coefficient of variation of the estimate of 2.1% were obtained. This method is well suited for a laboratory with a moderate volume of samples. We could process at least 200 digests per day, in contrast with the 60 per day which we had previously done by the Kjeldahl distillation and titration.

food science & technology,chemistry, analytical
Determination of ammonium in natural water using a quinoline-based o -dialdehyde fluorescent reagent with visible excitation wavelength

Xuejia Chen,Tingkai Xiong,Jin Xu,Yan Li,Min Zhang,Ying Liang

DOI: https://doi.org/10.1039/d1ay01462e

IF: 3.1

2021-01-01

Analytical Methods

Abstract:A method of determination of ammonium in natural water is proposed using a novel fluorescent reagent with visible-light excitation wavelength.

spectroscopy,chemistry, analytical,food science & technology
Determination of nitrogen in soil and plant materials: Use of boric acid in the micro-kjeldahl method

S. Yuen,A. Pollard

DOI: https://doi.org/10.1002/JSFA.2740041006

1953-10-01

Abstract:The use of boric acid for trapping ammonia in the micro-Kjeldahl determination is examined. A suitable procedure, together with a modified type of micro-distillation apparatus, is described. The buffer capacity of boric acid solutions was examined in relation to the sensitivity in the titration of ammonia dissolved in them. Two grades of boric acid, ‘pure’ (technical) and AnalaR, were compared; the former showed appreciable buffering on the acid side. The pH values of solutions of both grades decreased with increasing concentration. The sensitivity of the three indicators examined for the titration of ammonia diminished with increasing concentration of boric acid as a result of the increased buffering. With concentrated boric acid, all three indicators showed wide transitional periods at the end-point, but in solutions of concentration up to 1-0% of AnalaR grade the end-points shown by all three indicators were sharp. The methylene blue-methyl red indicator, however, was generally preferable. The ammonia-fixing capacity of boric acid was studied in air-bubbling tests and by recovery of a known amount of ammonia by distillation. A volume of 10 ml. of 1-0% boric acid fixed 5 mg. of nitrogen as ammonia sufficiently firmly to afford accurate analyses. For macro-determinations, 100 ml. of 2-0% boric acid held firmly up to 90 mg. of nitrogen.

Chemistry,Environmental Science,Agricultural and Food Sciences
Determination of ammonium and nitrate in soils by digital colorimetry

Garmay, Andrey V.

DOI: https://doi.org/10.1007/s10661-024-13068-1

IF: 3.307

2024-09-19

Environmental Monitoring and Assessment

Abstract:A method of digital colorimetric determination of ammonium and nitrate in soils is proposed. The method is based on corresponding photometric procedures of ammonium and nitrate determination after potassium chloride extraction from soil samples. Ammonium is determined as an indophenol dye, and nitrate is determined as an azo dye. The original procedures were modified to overcome the lower sensitivity of the digital colorimetric method. For ammonium determination, the time required for the reaction to proceed completely was studied. Along with the use of a 96-well microplate protected from ambient light by a special frame, mathematical correction of scattered radiation using black ink and taking the images by a scanner in transmission mode without any post-processing, the resulting colorimetric methods proved to provide accuracy and sensitivity close to those of the spectrophotometric method, and the overall analysis speed for tens of samples was even higher. Limits of detection and quantitation for NO 3 – were 0.42 and 1.4 mg/kg, and for NH 4 + , they were 1.1 and 3.7 mg/kg, which is lower than for standard methods. The methods' validity was proven by the analysis of standard samples and by the analysis of soil samples collected in several districts of the Moscow region.

environmental sciences
Urea Derivatives in Modern Drug Discovery and Medicinal Chemistry.

Arun K. Ghosh,M. Brindisi

DOI: https://doi.org/10.1021/acs.jmedchem.9b01541

IF: 8.039

2019-12-02

Journal of Medicinal Chemistry

Abstract:The urea functionality is inherent to numerous bioactive compounds, including a variety of clinically approved therapies. Urea containing compounds are increasingly used in medicinal chemistry and drug design in order to establish key drug-target interactions and fine-tune crucial drug-like properties. In this perspective, we highlight physicochemical and conformational properties of urea derivatives. We provide outlines of traditional reagents and chemical procedures for the preparation of ureas. Also, we discuss newly developed methodologies mainly aimed at overcoming safety issues associated with traditional synthesis. Finally, we provide a broad overview of urea-based medicinally relevant compounds, ranging from approved drugs to recent medicinal chemistry developments.

Medicine,Chemistry
Altering the substituents of salicylic acid to improve Berthelot reaction for ultrasensitive colorimetric detection of ammonium and atmospheric ammonia

Haili Yu,Guihua Zhang,Yanhua Cai,Faqin Dong

DOI: https://doi.org/10.1007/s00216-021-03485-3

2021-07-31

Analytical and Bioanalytical Chemistry

Abstract:The Berthelot reaction is a classic method for detection of ammonium (NH4+) and atmospheric ammonia (NH3) by using salicylic acid (SA) as the chromogenic substrate. However, there lacks a method for improving the activity of the Berthelot reaction to enhance the analytical performance for detection of NH4+ and NH3. Here, five SA analogues with electron-withdrawing groups (-F) and electron-donating groups (-CH3 and -OCH3) at different positions of the aromatic ring have been chosen as the alternative to SA for Berthelot reaction. Among these analogues, 4-methoxysalicylic acid (4-OCH3-SA) shows the best colorimetric response and color change at a NH4+ concentration of 30 μM, and the sensitivity of 4-OCH3-SA-based colorimetric assay for NH4+ increases 1.75-fold compared with that of SA-based colorimetric method. This enhancement effect is attributed to the strong electron-donating property of 4-OCH3 group, activating the two-step electrophilic aromatic substitution reaction in the Berthelot reaction. Additionally, visual and sensitive detection of NH3 is realized, along with a low limit of detection down to 0.037 ppm. Furthermore, we demonstrate that this assay is reliable and practical for detection of NH4+ and NH3 in real water and air samples with good accuracy.

chemistry, analytical,biochemical research methods
Aptamer Turn-On SERS/RRS/Fluorescence Tri-mode Platform for Ultra-trace Urea Determination Using Fe/N-Doped Carbon Dots

Chongning Li,Jiao Li,Aihui Liang,Guiqing Wen,Zhiliang Jiang

DOI: https://doi.org/10.3389/fchem.2021.613083

IF: 5.5

2021-03-15

Frontiers in Chemistry

Abstract:Sensitive and selective methods for the determination of urea in samples such as dairy products are important for quality control and health applications. Using ammonium ferric citrate as a precursor, Fe/N-codoped carbon dots (CD FeN ) were prepared by a hydrothermal procedure and characterized in detail. CD FeN strongly catalyzes the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by H 2 O 2 to turn on an indicator molecular reaction, forming an oxidized tetramethylbenzidine (TMB ox ) probe with surface-enhanced Raman scattering, resonance Rayleigh scattering, and fluorescence (SERS, RRS, and FL) signals at 1,598 cm −1 , 370 nm, and 405 nm, respectively. The urea aptamer (Apt) can turn off the indicator reaction to reduce the tri-signals, and the addition of urea turns on the indicator reaction to linearly enhance the SERS/RRS/FL intensity. Thus, a novel Apt turn-on tri-mode method was developed for the assay determination of ultra-trace urea with high sensitivity, good selectivity, and accuracy. Trace adenosine triphosphate and estradiol can also be determined by the Apt-CD FeN catalytic analytical platform.

chemistry, multidisciplinary
A New Phenol–Hypochlorite Reaction for Ammonia

M. K. MUFTIC

DOI: https://doi.org/10.1038/201622a0

IF: 64.8

1964-02-01

Nature

Abstract:THE phenol–hypochlorite reaction for ammonia was first described by D. D. Van Slyke and A. Hiller1, and later was modified by M. Borsook2 and J. A. Russell3. Unfortunately this reaction cannot be applied directly to biological fluids, because certain amino-acids, alkylamines and ammonium salts can react to a certain extent. Moreover, Russell's modification, being dependent on small concentrations of molybdenum ion, can be affected by the presence of thiols, thioamides, and in general by any chelating andreducing substances.

multidisciplinary sciences
Determination of Ammonia in Water Based on Chemiluminescence Resonance Energy Transfer Between Peroxymonocarbonate and Branched Nayf4:Yb3+/Er3+ Nanoparticles

Hui Chen,Haifang Li,Jin-Ming Lin

DOI: https://doi.org/10.1021/ac302300z

IF: 7.4

2012-01-01

Analytical Chemistry

Abstract:The ultraweak chemiluminescence (CL) from the reaction of hydrogen peroxide and carbonate is strongly enhanced by the branched NaYF(4):Yb(3+)/Er(3+) nanoparticle (NP) in the presence of aqueous ammonia. It was explained that ammonia catalyzes the decomposition of peroxymonocarbonate, which is the product of hydrogen peroxide mixing with bicarbonate, making the formation of (CO(2))(2)*, (O(2))(2)*, and (1)O(2). The excitation energy, carried by these emitter intermediates, can be transferred to NaYF(4):Yb(3+)/Er(3+) NP. The CL intensity is directly proportional to the concentration of ammonia present in the solution. A flow-injection CL system with high sensitivity, selectivity, and reproducibility is proposed for the determination of aqueous ammonia. The proposed method exhibited advantages in a larger linear range from 0.5 μmol L(-1) to 50 μmol L(-1) and a lower detection limit of 1.1 × 10(-8) mol L(-1) (S/N = 3). This method has been successfully applied to the evaluation of ammonia in water samples with recoveries from 95% to 108%. The relative standard deviations are 1.8% and 4.1% for intra-assay and inter-assay precision, respectively.
[7] Determination of amide residues by chemical methods

Philip E. Wilcox

DOI: https://doi.org/10.1016/s0076-6879(67)11009-4

1967-01-01

Methods in Enzymology

Abstract:Publisher This chapter discusses the determination of amide residues by chemical methods. The sum of asparagine and glutamine in a sample of protein may be determined by the estimation of the ammonia formed during acid catalyzed hydrolysis. The most accurate determination is obtained under conditions that produce complete amide hydrolysis, but cause insignificant or minimal deamination of serine, threonine, cystine, or tryptophan. Conditions that meet these requirements are (1) concentrated HCl at 37°C for 10 days and (2) 2N HC1 at 100°C for several hours. The estimation of ammonia is most readily carried out by a modification of the Conway micro diffusion technique. There are two procedures for the esterification of a sample of protein. The first procedure consists of the treatment of the protein with methanolic HC1 used in a definitive study of the determination of amide groups in several proteins. The second procedure employs methanol-acetic anhydride as the esterifying reagent and is less extensively studied as a prelude to reduction with lithium borohydride. Reduction is another method used and uses reagents such as lithium borohydride for the determination. Other methods such as analysis, estimation, and interpretation of data are also discussed.

biochemistry & molecular biology,biochemical research methods
Quantitative Raman Spectroscopy of Urea and Thiourea in the Reaction Mixtures of Allantoin and 4,5‐Dihydroxyimidazolidine‐2‐Tione Formation

L. E. Kalichkina,P. K. Krivolapenko,V. P. Tuguldurova

DOI: https://doi.org/10.1002/jrs.6729

IF: 2.727

2024-09-03

Journal of Raman Spectroscopy

Abstract:A new approach to quantitative determine the reagent concentrations (thiourea and urea) using Raman spectroscopy in situ in the reaction mixture exemplified by the reactions of formation of allantoin and 4,5‐dihydroxyimidazolidine‐2‐thione was presented. It was shown that the immersion probe‐related band as an internal standard made it possible to obtain a linear dependence of the intensity of the analyte bands on the concentration. The methods developed by this approach were acceptable to study the kinetics of reactions. The present work introduces a new approach to quantitative determine the reagent concentrations (thiourea and urea) using in situ Raman spectroscopy in the reaction mixture exemplified by the reactions of formation of allantoin and 4,5‐dihydroxyimidazolidine‐2‐thione. The approach comprises the use of a commercially available immersion probe (MarqMetrix Process Elite BallProbe with sapphire lens) as a standard for the immersion probe band at 790 cm−1 of optical glass. This leads to a linear dependence of the ratio of the intensity of non‐overlapping analyte bands at 1003 cm−1 of ‐C‐N‐ vibrations in urea to the one of the 790 cm−1 immersion probe band on the concentration of urea in the test solution. The definable method parameters such as precision (repeatability and reproducibility), linearity, limit of detection (LoD), limit of quantitation (LoQ), and accuracy were determined. The quantitative Raman spectroscopy method is linear, precise within the range of determined concentrations from 0.75 to 2.00 M and can be used to calculate the kinetics of allantoin formation. Using thiourea as an example, it is shown that despite the partial overlap of the analyte band at 730 cm−1 of the ‐C=S vibrations of thiourea with the immersion probe band at 790 cm−1, the method to determine thiourea in the reaction of 4,5‐dihydroxyimidazolidine‐2‐thione preparation is also linear and precise in the range of determined concentrations from 0.10 to 1.57 M.

spectroscopy
The pH of urea solutions

Henry B. Bull,Keith Breese,Gary L. Ferguson,Charles A. Swenson

DOI: https://doi.org/10.1016/s0003-9861(64)80017-5

IF: 4.114

1964-02-01

Archives of Biochemistry and Biophysics

Abstract:It has been confirmed that urea increases the measured pH of aqueous solutions. Conductance measurements on acetic acid and colorimetric measurements on p-nitrophenol show that urea increases the dissociation of weak acids. From conductance and pH measurements on ammonium hydroxide-ammonium chloride in urea solution, it is concluded that urea increases the ionization of water. The same conclusion is reached from pH measurements on potassium hydroxide in urea solutions. It is postulated that urea at high concentrations drastically reduces the activity of hydrogen ions, leaving the activities of the other ions more or less unchanged.

biochemistry & molecular biology,biophysics
Development and validation of two analytical methods for urea determination in compound feed, including pet food, and yeast using high-performance liquid chromatography coupled with fluorescence detection and tandem mass spectrometry

Marco Krämer,Hildburg Fry,Oliver Kappenstein

DOI: https://doi.org/10.1080/19440049.2021.1901999

2021-03-30

Abstract:Urea is authorised in the European Union (EU) as feed additive for ruminants. Because of its high molecular nitrogen content, it is a substance for potential protein adulteration in non-ruminant feed. The EU defines a spectro-colorimetric method as an official control method for the determination of urea in feed, whereas the Association of Official Analytical Chemists (AOAC) in the United States recommends an enzymatic method. Discrepancies between results obtained by these different approaches have been reported, especially at low concentrations. Therefore, we developed and validated two methods for urea determination in compound feed, including pet food, and yeast (Saccharomyces cerevisiae) over a wide concentration range using high-performance liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) and fluorescence detection (HPLC-FLD) and compared performance with a commercial enzyme kit. Limit of detection (LOD) and limit of quantification (LOQ) were found to be 3 and 8 mg kg−1 for LC-MS/MS and 2 and 7 mg kg−1 for HPLC-FLD, respectively. For both methods, the variation coefficients ranged between 1.4% and 7.2% in ruminant feed used as reference material as well as spiked samples of complete feed for chicken, pet food for dogs and cats, as well as yeast. Recovery rates for spiked samples ranged from 86% to 105%. For real samples of complete feed for poultry, wet and dry pet food for cats and dogs and yeast amounts of urea between < LOD and 200 mg kg−1 relative to a feedingstuff with a moisture content of 12% were found. In comparison with the enzyme kit, the newly developed methods proved to be less time-consuming in sample preparation and more stable regarding matrix effects.

Modified reagents for determination of urea and ammonia.

Colorimetric determination of urea using diacetyl monoxime with strong acids

Study on the Synthesis of N, N'-Bis(4-nitropheoyl)urea

Determination of Ammonium Nitrogen in Fermentation Broth Through Indophenol Blue Reaction

Determination of Medium Concentration Urea in Solution by P-Dimethylaminobenzaldehyde Colorimetry

Colorimetric Detection of Urea, Urease, and Urease Inhibitor Based on the Peroxidase-Like Activity of Gold Nanoparticles.

A-084 Performance evaluation of Sentinel Diagnostics' Ammonia Ultra assay on Beckman Coulter AU/DxC AU Systems

Aminocoumaranones as Chemiluminescence Indicators of the Urease Activity and Hydrogen Peroxide

Manual Salicylate-Hypochlorite Procedure for Determination of Ammonia in Kjeldahl Digests

Determination of ammonium in natural water using a quinoline-based o -dialdehyde fluorescent reagent with visible excitation wavelength

Determination of nitrogen in soil and plant materials: Use of boric acid in the micro-kjeldahl method

Determination of ammonium and nitrate in soils by digital colorimetry

Urea Derivatives in Modern Drug Discovery and Medicinal Chemistry.

Altering the substituents of salicylic acid to improve Berthelot reaction for ultrasensitive colorimetric detection of ammonium and atmospheric ammonia

Aptamer Turn-On SERS/RRS/Fluorescence Tri-mode Platform for Ultra-trace Urea Determination Using Fe/N-Doped Carbon Dots

A New Phenol–Hypochlorite Reaction for Ammonia

Determination of Ammonia in Water Based on Chemiluminescence Resonance Energy Transfer Between Peroxymonocarbonate and Branched Nayf4:Yb3+/Er3+ Nanoparticles

[7] Determination of amide residues by chemical methods

Quantitative Raman Spectroscopy of Urea and Thiourea in the Reaction Mixtures of Allantoin and 4,5‐Dihydroxyimidazolidine‐2‐Tione Formation

The pH of urea solutions

Development and validation of two analytical methods for urea determination in compound feed, including pet food, and yeast using high-performance liquid chromatography coupled with fluorescence detection and tandem mass spectrometry