Abstract:Here, we present the electrochemical determination of ammonium in water samples, emphasizing the importance of accurate and precise assessment of its concentration. The modified electrode used in this study was fabricated through the anodic polymerization of 1-aminoanthraquinone (1-AAQ) and deposition of silver particles into a carbon paste electrode. The fabrication process involved cyclic voltammetry in a 0.1 M HCl solution, followed by the application of a potential of 0.2 V for 75 s. The resulting Ag/poly-1-AAQ/CPE exhibited remarkable electrochemical properties, as confirmed by scanning electron spectroscopy (SEM), energy-dispersive X-ray analysis (EDX), and elemental mapping. The successful deposition of silver at percentages of 12.07% on Ag/CPE and 0.75% on Ag/poly-1-AAQ/CPE was observed. The Ag/poly-1-AAQ/CPE was employed for impedimetric determination of ammonium in a solution of 0.1 M Na 2 SO 4 . The charge transfer resistance) output from the fitting of the experimental impedimetric data of ammonium determination exhibited good linearity over a concentration range of 5 μM to 200 μM NH 4 + , with a detection limit of 3.3 μM NH 4 + . The precision of the modified electrode over ten replicate measurements were conducted at three concentration levels (a low of 5 μM NH 4 + , a medium of 50 μM NH 4 + , and a high of 200 μM NH 4 + ). The obtained relative standard deviation (RSD) values of 18%, 12% and 7%, respectively, indicating good precision.

Determination of ammonium in natural water using a quinoline-based o -dialdehyde fluorescent reagent with visible excitation wavelength

Ammonium determination by merging-zone flow injection analysis and a naphthalene-based fluorescent probe

Spectrophotometric Determination of Trace Quaternary Phosphonium Salts in Water with M-Nitrophenol

Determination of Ammonium in Seawater by Purge-and-Trap and Flow Injection with Fluorescence Detection

Fluorescence sensing of ammonia in water using lead-free perovskite Cs2AgInCl6:Bi

Determination of Ammonia in Water Based on Chemiluminescence Resonance Energy Transfer Between Peroxymonocarbonate and Branched Nayf4:Yb3+/Er3+ Nanoparticles

Electrochemiluminescence (ECL) detection of ammonium ion based on a novel iridium complex modified electrode

Determination of New Herbicide ZJ0777 by the Fluorescence Quenching Method

A Reversible Spectrophotometric Method Based on a Coupled Microfluidic Chip for Highly Selective Ammonium Detection

A New Spectrophotometry Method for the Determination of Aniline in Environmental Water Samples

Fluorescent Light-Up Detection of Amine Vapors Based on Aggregation-Induced Emission

Flow-injection analysis with fluorescence detection for the determination of trace levels of ammonium in seawater

Spectrophotometric Determination of Aniline in Polluted Surface Water and Wastewater – Improved Reagents in Test Kit Format

An impedimetric approach for determination of ammonium using silver/poly-1-aminoanthraquinone/carbon paste electrode

Determination of Nitrogen in Ammonium Salt by Formol Titration Method

Quaternary Ammonium Promoted Ultra Selective and Sensitive Fluorescence Detection of Fluoride Ion in Water and Living Cells

Review of separation methods for the determination of ammonium/ammonia in natural water

The quenching of o-phenanthroline fluorescence by nucleic acids and its analytical applications

2-Amino-5,7-dimethyl-1,8-naphthyridine as a fluorescent reagent for the determination of nitrite.

A fluorescent receptor for alkylammonium ions based on an anthryl-linked triazole-modified hexahomotrioxacalix[3]arene

Simple all-optical method for in situ detection of ultralow amounts of ammonia