Abstract:Al 2 O 3 nanoparticles were created using laser ablation of an aluminum (Al) target in deionized water. The ablation process was carried out using three different laser fluences (12.7, 15.9, and 19.1 J/cm 2 ). In this method, a 1064-nm Q-switched Nd:YAG laser with a 7-ns pulse width, 1-Hz repetition rate, and 100 pulses was used. The UV-visible absorption spectrum of the as-synthesized Al 2 O 3 colloidal solution of nanoparticles showed an absorption maximum lying at 210 nm, which verified the presence of Al 2 O 3 nanoparticles in deionized water. The bandgap of Al 2 O 3 NPs decreased from 4.6 to 4.2 eV with the increased laser fluences. The fingerprint identification of Al 2 O 3 colloidal nanoparticles was performed through FTIR spectroscopy analysis. The spectrum recorded several important stretch modes, including carbon, hydrogen, oxygen, and Al 2 O 3 bands. Field emission scanning electron microscopy (SEM) was used to examine the morphology of Al 2 O 3 nanoparticles produced at various laser fluences. It exposed the highly aggregated particles, which ranged in size from 91 nm to sub-micrometers. TEM images and size distribution of Al 2 O 3 NPs showed that the partials size depended on laser fluence intensity. It showed that the majority of the nanoparticles produced by all of the ablated laser fluences have spherical shapes, with average particle sizes of 57, 70, and 117 nm at 12.7-, 15.9-, and 19.1-J/cm 2 laser fluences, respectively. The effect of laser fluence on the photosensitivity of the Si detector based on the nanostructured Al 2 O 3 film was studied. The photodetector showed strong responsiveness peaks at 350 and 800 nm, with values of about 1.2 AW −1 and 1.08 AW −1 corresponding to the responsiveness of the Al 2 O 3 film and the Si substrate, respectively. It also displayed a high photo-detective value in the UV-Vis region. Therefore, nanosecond laser ablation in liquid is an efficient and adaptable approach for producing nanoparticles with customized size, shape, and properties. It is also a wonderful way to manufacture a variety of nanostructured materials that have applications in a variety of industries.

Reactive Laser Ablation Synthesis of Nanosize Alumina Powder

Characteristics of Synthesized Alumina Nanoparticles in a High-Pressure Radio Frequency Thermal Plasma Reactor

Nano-sized amorphous alumina particles obtained by ball milling ZnO and Al powder mixture

Alpha alumina synthesis by laser treatment of bi-phasic nanowires

Synthesis and sintering behavior of a nanocrystalline α-alumina powder

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Structure and phase changes of alumina produced by flame hydrolysis

Synthesis of nanometer Cu and Al compound powders by excimer laser ablation

Synthesis and Characterization of Al2O3 Nanoparticles Using PLAL With Different Nd:YAG Laser Fluences for Photodetectors

In-Situ Reaction Deposition Of Alumina Ceramic Film By Laser-Induced Vacuum Arc

Size-controlled synthesis of alumina nanoparticles from aluminum alkoxides

Preparation of α- Al2 O3 thin films by electron cyclotron resonance plasma-assisted pulsed laser deposition and heat annealing

Preparation Of Alpha-Al2o3 Thin Films By Electron Cyclotron Resonance Plasma-Assisted Pulsed Laser Deposition And Heat Annealing

Surface Treatment of Alumina-Based Ceramics Using Combined Laser Sources

In-situ synthesis of nitrides and oxides through controlling reactive gas atmosphere during laser-powder bed fusion of Fe-12Cr-6Al

Synthesis of α-Al2O3 Nanopowders at Low Temperature from Aluminum Formate by Combustion Process

AlO molecular spectral emission enhanced by delayed double-pulse laser ablation of aluminum target in air

Investigating crater formation in nanosecond laser ablation of aluminum foils

Effect of Liquid Properties on Laser Ablation of Aluminum and Titanium Alloys

Formation of Aluminum Nanoparticles upon Condensation from Vapor Phase for Energetic Applications

Flame-Assisted Laser Polishing of Alumina Ceramic Surface Properties