Abstract:Abstract The porous structure and specific surface area (SSA) of activated carbon (AC) materials are two important factors to determine the performance of supercapacitors, and the emphasis in the current research is on how to regulate the pore structure of AC by an effective method. In this work, the low-cost and widely sourced semi-coke was employed to prepare AC in one step by the chemical activation method, which can effectively decrease the production cost of AC and promotes its application. Orthogonal experiments were designed to reveal the effect of process parameters on the electrochemical performance. It was found that the activator concentration has an important effect on the pore structure. When the mass ratio of the activator to semi-coke (Ras) remained unchanged, the large heating rate would result in a high activator concentration that delivered stronger etching power at the target temperature and thus remarkably affects the pore size and the pore volume of AC. When the heating rate changed from 2 to 7 ℃ min−1, there had a considerable SSA increase of ca. 200 m2 g−1. To further reveal the effect of activator concentration on the pore’s property, the different mass ratios of the activator to semi-coke (Ras) were used. A series of ACs were produced, and the one that was prepared at 600 ℃ in a heating rate of 5 ℃ min−1 in a Ras value of 3:1 delivered a high specific capacitance of 376 F g−1 at 1 A g−1 and a good cycling performance with a capacity retention of 98% after 10,000 cycles at 10 A g−1. This work provided new inspiration for the preparation of high-performance activated carbon with low-cost semi-coke.

Controllable adjustment of oxygen contents in activated carbons and oxygen effect on electrochemical performances in supercapacitors

High‐performance activated carbons for supercapacitor: Effects of porous structures, heteroatom doping, and morphology

Glucose-derived activated carbons for supercapacitors: comparison between single O doping and N/O co-doping

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Oxygen-doped activated carbons derived from three kinds of biomass: preparation, characterization and performance as electrode materials for supercapacitors

Thermally oxidized activated carbon with high specific surface area to boost electrochemical performance for supercapacitor

Activated‐carbon‐based supercapacitors with high gravimetric‐ and volumetric capacitance at commercial‐level mass loading

Activator concentration regulating the porous structure of activated carbon for supercapacitor application

Controlling and optimizing the morphology and microstructure of 3D interconnected activated carbons for high performance supercapacitors

Pore-structure Regulation and Heteroatom Doping of Activated Carbon for Supercapacitors with Excellent Rate Performance and Power Density

Honeycombed activated carbon with greatly increased specific surface by direct activation of glucose for supercapacitors

Regulating the properties of activated carbon for supercapacitors: impact of particle size and degree of aromatization of hydrochar

A high-performance supercapacitor based on activated carbon fibers with an optimized pore structure and oxygen-containing functional groups

Molecularly-regulating oxygen-containing functional groups of ramie activated carbon for high-performance supercapacitors

Enabling high surface and space utilization of activated carbon for supercapacitors by homogeneous activation

Dual-function highly oxidative potassium salts empowering high-performance transition metal oxide/activated carbon for hybrid aqueous supercapacitors

Mesoporous-rich and oxygen-rich hierarchical porous carbon derived from black humic acid for supercapacitor electrode

An Effective Strategy to Synthesize Well-Designed Activated Carbon Derived from Coal-Based Carbon Dots via Oxidation before Activation with a Low KOH Content as Supercapacitor Electrodes

Surface Modification by Graphene Oxide: an Efficient Strategy to Improve the Performance of Activated Carbon Based Supercapacitors

Pore-size effect of activated carbons on the electrochemical performances of symmetric supercapacitors under compression

Performance of activated carbons synthesized from fruit dehydration biowastes for supercapacitor applications