Abstract:From the synthesis of the bio‐based foam up to its final lifespan prediction. The objective of this study is to assess, characterize, and forecast the aging effects on the mechanical properties of a vegetable‐based polyurethane foam (PUF) derived from castor oil under elevated relative humidity conditions and at two distinct load orientations (aligned with the expansion direction and perpendicular to it). Ten specimens were subjected to temperatures of 60, 75, and 90°C, along with a relative humidity of 90%, for a duration of up to 60 days. Compression tests, following ASTM D1621‐16 standards and supplemented by 3D digital image correlation, revealed nearly isotropic behavior with marginally lower compression strength in the expansion direction. On the other hand, the strength of the foams at 90°C was higher in that direction. This led to a smaller activation energy (Ea) in this property, which ended up showing a shorter lifespan prediction considering the strength retention in this direction. The stiffness values were proportionally more similar in both directions than the strength ones and this was observed in the Ea for those curves. In contrast to several other foams and polyurethanes, the one examined in this study exhibited consistently higher Ea values for its mechanical properties, particularly in the transverse direction to expansion, surpassing 94 kJ/mol. This indicates a robust diffusion and chemical stability, suggesting its potential for prolonged utilization compared to conventional oil‐based foams. A prediction was made that this foam would lose 50% of its stiffness and strength in around 9.8 and 9.5 years at 20°C, respectively, considering the directions more sensitive to the aging process. This research offers valuable insights for predicting lifespan based on operating temperatures and property retention needs, contributing to the advancement of sustainable materials in structural applications. Highlights Fifty specimens investigated for each of two directions. Evaluation of vegetable‐based PUF aging process unveils density changes. Unique behavior noted: different Ea values for each direction. High Ea values indicate enhanced mechanical stability over oil‐based foams. Lifespan prediction enhances material application prospects.

Impact of ageing factors on the performance of novel viscoelastic polyurethane foams utilized as seals in respiratory protective devices

Viscoelastic Polyurethane Foams with Reduced Flammability and Cytotoxicity

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

The Effect of Aging Process Conditions on the Thermal Properties of Poly(Dimethylsiloxane)-Based Silicone Rubber

Thermal Oxidation Ageing Effects on Silicone Rubber Sealing Performance

The Deterioration of Foamed Silicone Rubber in Humid and Hot Environments

Influence characteristics of water penetration on fibre‐reinforced polymer/rigid polyurethane foam interface of the composite cross‐arm considering natural ageing

Aging properties of a vegetable‐based polyurethane foam under high relative humidity and different temperatures

Experimental Evaluation of Aging Characteristics of EPDM As a Sealant for Undersea Shield Tunnels

Comprehensive Investigation of Stoichiometry–Structure–Performance Relationships in Flexible Polyurethane Foams

The Effect of Rapeseed Oil Biopolyols and Cellulose Biofillers on Selected Properties of Viscoelastic Polyurethane Foams

Observation of the Effect of Aging on the Structural Changes of Polyurethane/Polyurea Coatings

Assessment of the degradation of polyurethane foams after artificial and natural ageing by using pyrolysis-gas chromatography/mass spectrometry and headspace-solid phase microextraction-gas chromatography/mass spectrometry

Thermal Degradation and Thermo-oxidative Aging Behavior of Vinylidene Fluoride-Containing Fluoroether Rubber

Assessment of frequency and amplitude dependence on the cyclic degradation of polyurethane foams

Effect of Combined UV Thermal and Hydrolytic Aging on Micro-Contact Properties of Silicone Elastomer

The effect of UV radiation ageing on the structure, mechanical and gas permeability performances of ethylene–propylene–diene rubber

Flame Retardancy and Thermal Stability of Rigid Polyurethane Foams Filled with Walnut Shells and Mineral Fillers

Experimental Measurements of Mechanical Properties of PUR Foam Used for Testing Medical Devices and Instruments Depending on Temperature, Density and Strain Rate

Viscoelastic Polyurethane Foam Biocomposites with Enhanced Flame Retardancy

The effect of aging during storage on the performance of a radial lip seal