Abstract:Titanium matrix composites synthesized using powder metallurgy methods have attracted significant attention due to their extraordinary mechanical properties. In this study, cost-effective and high-performance TiC/Ti-6Al-4 V matrix composites were synthesized and characterized using a combined elemental powder mixing and spark plasma sintering method. Studies on the effect of graphene nanoplate (GNP) content on microstructures of Ti-6Al-4 V matrix composites showed typical Widmanstatten structures without apparent pores and microcracks. The grain size of composites was decreased significantly with the increase of GNP content, mainly due to the pinning effect of in-situ generated TiC particles at grain boundaries, which limited the rapid grain growth of the matrix. Mechanical test results showed that their yield strength and ultimate tensile strength were 889.0 MPa and 988.3 MPa, respectively, and their total fracture elongation was maintained at ∼14.2 %. GNPs/Ti-6Al-4 V exhibited superior strength (e.g., yield and ultimate tensile strength of 1028.4 and 1121.6 MPa, which are 14.4 % and 13.5 % higher than those of the matrix) and maintained a good ductility of ∼ 9.8 % with only 0.1 wt% GNP addition. Carbon nanomaterial (such as graphene nanoplates) induced the precipitation of needle-like nano-secondary phases in trigeminal grain boundary β phases, which strengthened the β-Ti soft phase. The reinforced strength of the composite is mainly attributed to the grain refinement, secondary α phases precipitation strength and dislocations strengthening. This work provides a new methodology for fabrication of high-performance titanium matrix composites (TMCs) combination blended elemental powder metallurgy (BEPM) and sintering technology.

Graphene nanoplatelets (GNPs)-templated synthesis of oriented TiB and the inspiration for tailoring three-dimensional (3D) interface structure in GNPs/Ti matrix composites

Achieving high strength-ductility in TiBw-GNPs/Ti6Al4V composites via 3D interface configuration

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture

Tailoring Strength-Ductility of Titanium Matrix Composites Reinforced with Graphene Nanoplatelets

The Gnps Evolution and Interface Reaction Mechanism of Gnps/Ta15 Composites by Pre-Sintering and Canned Hot Extrusion

Simultaneously Enhancing the Strength and Ductility in Titanium Matrix Composites Via Discontinuous Network Structure

Boron nitride nanosheets as precursors for 3D nano-configurations in titanium matrix composites: interfacial evolution and mechanical behavior

The Interface of GNPs/Ti-6Al-4V Composites Influenced by the Defect Density of GNPs

Effects of mixing methods on the interface and microstructure evolution of graphene platelets/Ti-6Al-4V powder composites fabricated by powder metallurgy and extrusion

Enhanced interfacial bonding and mechanical properties of (TiC p +GNPs)/Cu composites by Ti-induced GNPs/Cu interfacial modification

Effects of the interface and mechanical properties of GNPs/TA15 composites through adding B powders

The graphene nanoplatelets evolution and interface reaction of graphene nanoplatelets/TA15 composites by pre-sintering and hot extrusion

Synergistic effects of TiB2 and graphene nanoplatelets on the mechanical and electrical properties of B4C ceramic

Interface Evolution and Mechanical Properties of Nickel Coated Graphene Nanoflakes/pure Titanium Matrix Composites

Uniformly Dispersing GNPs for Fabricating Graphene-Reinforced Pure Ti Matrix Composites with Enhanced Strength and Ductility

Achieving balanced strength-ductility of heterostructured TiC/graphene nanoplatelets (GNPs) reinforced Al matrix composites by tuning TiC-to-GNPs ratio

In-situ synthesized TiC/Ti-6Al-4V composites by elemental powder mixing and spark plasma sintering: Microstructural evolution and mechanical properties

The Distribution of Reinforcements in Titanium Matrix Composites Enhanced with Graphene: from Dispersed to Networked

Simultaneously improving mechanical, thermal, and anti-wear properties of Ti alloys using 3D-networked graphene as reinforcement

Mechanical and tribological properties of graphene nanoplatelets-reinforced titanium composites fabricated by powder metallurgy