Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Aluminium matrix composites significantly benefit the manufacturing sector due to the high strength-to-weight ratio. However, grain refinement was one of the major problems faced by the research community and also as-cast AA6063 contained eutectic silicon with sharp, long elongated laths that consequently reduces strength and limit their applications. So, the prime novelty of this research work is to refine the grains by performing the cold rolling operation in AA6063 and incorporating rice husk ash and coal fly ash in the AA6063 matrix to break those eutectic laths which attributes to the enhancement of the mechanical properties. Rice husk ash and coal fly ash were chosen because they are economical, possess low density and are available in enormous quantities as solid waste by-products. They contain a substantial concentration of SiO2 and serve as a viable reinforcement for improving the mechanical properties of aluminium composites. In this research, the grain characteristics along with the mechanical properties of aluminium composites reinforced with rice husk ash and coal fly ash, produced by the stir casting technique were investigated. The reinforcements were added in varying concentrations (1.5 and 3.0 wt.%). Six specimens were fabricated of which five were cold rolled. Image J and Origin software was used in evaluating the average grain size of the fabricated alloys and their composites. The results were discussed with the help of grain size distribution and profile plots. Structural and composition studies were done using scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction spectroscopy. Hardness and tensile tests were performed on the fabricated composites. The outcome of this research reveals, AA6063-3 wt.% rice husk ash composite has improved hardness (84HV) and tensile strength (156 MPa). Moreover, the average grain size of 10.52 μm was the main reason for the attainment of enhanced mechanical properties.

Microstructure and mechanical behavior of coal-derived reduced graphene oxide reinforced AA7075 fabricated via friction stir processing

Microstructural Evolution & Mechanical Properties of ZrO2/GNP and B4C/GNP reinforced AA6061 Friction Stir Processed Surface Composites - A Comparative study

Study on the Microstructure and Microhardness Behavior of Reduced Graphene Oxide Reinforced Alumina Nanocomposites

Synergistic effect of Al2O3-decorated reduced graphene oxide on microstructure and mechanical properties of 6061 aluminium alloy

Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: Powder synthesis and prepared composite characteristics

Investigation on Fractographic and Microstructure Evolution in AA7075/ZrO2/G Multilayer Laminated Composite Fabricated Using Friction Stir Additive Manufacturing Process

Microstructural, mechanical and tribological characteristics of reduced graphene oxide (rGO) reinforced nanostructured Al2O3-13wt. %TiO2 coatings

Advancements in Aluminum-Based Composite Manufacturing: Leveraging ZrO2 Reinforcement through Friction Stir Process

Impact of Hard and Soft Reinforcements on the Microstructure, Mechanical, and Physical Properties of the Surface Composite Matrix Manufactured by Friction Stir Processing

Microstructural characterization, hardness and impact behavior of AA7075/steel slag surface composites fabricated through multipass friction stir process

Investigation of aluminum-based mono and hybrid surface composites by incorporating SiC and graphene reinforcements using friction stir processing

Enhancing Aluminum-Based Composite Manufacturing: Leveraging ZrB2 Reinforcement via Friction Stir Process

Uniform dispersion of graphene oxide in aluminum powder by direct electrostatic adsorption for fabrication of graphene/aluminum composites.

Microstructural characterization and tribological behavior of surface composites fabricated on AA7050-T7451 alloy via friction stir processing

Experimental Investigation into the Preparation Process of Graphene-Reinforced Aluminum Matrix Composites by Friction Stirring Processing

Strength-ductility Synergy of Reduced Graphene Oxide/2024al Matrix Composites by Heterogeneous Structure Design and Hybrid Nanoparticles Optimized Interface

Investigation Of Microstructural Evolution And Mechanical Properties Of Surface Graphitized Al-1100 Alloy

Enhanced mechanical behaviour and grain characteristics of aluminium matrix composites by cold rolling and reinforcement addition (Rice husk ash and Coal fly ash)

Development of dissimilar AA2014 and AA2024 based composite with nano-Si3N4 reinforcement by friction stir process technique

Influence of friction stir processing on microstructure and mechanical properties of AA6061 reinforced with Zr and Ni metallic particles

Wear Analysis of Friction Stir Processed AA7075-SiC-Graphite Hybrid Surface Composites