Abstract:MnO 2 is an attractive material owing to its high specific capacitance, excellent electrochemical activity, thermal and chemical stability, environmental benignity and broad potential window. However, its poor electrical conductivity limits its performance in supercapacitor applications. The electrical conductivity of MnO 2 can be enhanced by making its composites with carbon nanomaterials as these offer superior electrical conductivity and high specific surface area. The present study is a comparative study on the effect of various types of carbon nanomaterials such as carbon nanotubes (CNTs), graphene oxide, thermally reduced graphene oxide, activated carbon and carbon nanofibers on the supercapacitive performance MnO 2 electrodes by making composite electrodes. MnO 2 was synthesized by a facile chemical reduction method, and calcination was performed at 200 °C to obtain amorphous state. MnO 2 -based composite electrodes were prepared using 10 wt.% of various carbon nanomaterials. Characterization of different carbon materials was carried out by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and atomic force microscopy. Composite electrodes were prepared by coating mixture, consisting of MnO 2 , carbon nanomaterials, carbon black and polyvinylidene fluoride on the surface of highly porous Ni foam using a high-speed vacuum planetary centrifugal mixer. Electrochemical characterization of the prepared electrodes was performed by cyclic voltammetry, galvanostatic charge discharge (GCD) and electrochemical impedance spectroscopy (EIS). GCD revealed that MnO 2 -CNTs composite electrodes showed maximum specific capacitance (SC) of 330 F/g at 1 A/g current density and areal capacitance of 3.16 F/cm 2 with 5–7 mg mass loading of active material in 3 M KOH as an aqueous electrolyte. This SC was ca. 79% higher than pure MnO 2 and also higher than previously reported MnO 2 /CNTs composite electrodes. MnO 2 -CNTs symmetric supercapacitor device showed excellent SC of 177 F/g at 1 A/g current density with 94% charge retention after 1000 GCD cycles. EIS analysis showed that MnO 2 -CNTs composite electrode had the lowest charge transfer resistance compared to other electrodes.

Investigating the Influence of Sodium Preintercalation on the Electrochemical Behavior of Ultrathin MnO 2 Nanowires for Enhanced Supercapacitor Performance

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

Enhanced Reaction Kinetics of N–MnO 2 Nanosheets with Oxygen Vacancies via Mild NH 3 ·H 2 O Bath Treatment for Advanced Aqueous Supercapacitors

Different Phase and Morphology Effect of Manganese Oxide on Electrochemical Performance for Supercapacitor Application

Synthesis and Kinetic Analysis of «-MnO2 Nanowires for Supercapacitor Electrode

Sodium Pre-Intercalation-Based Na3-δ-MnO2@CC for High-Performance Aqueous Asymmetric Supercapacitor: Joint Experimental and DFT Study

Improve the Intrinsic Conductivity of MnO2 by Indium Doping for High Performance Neutral Aqueous Sodium-Ion Supercapacitors with Commercial-Level Mass-Loading

A Mild One-Step Synthesis of Sodium Pre-Intercalated Δ-Mno2@cc for Flexible High-Performance Supercapacitors with Ultralong Cycle Life

Sodium Pre-Intercalation Based Na3-Δ-Mno2@Cc for High Performance Aqueous Asymmetric Super Capacitor: Joint Experimental and Dft Study

Mn 3+ e g Configuration and Electron Transfer in Na-Incorporating α-MnO 2 to Improve Electrochemical Supercapacitor: An In Situ and Ex Situ X-ray Absorption Spectroscopic Investigation

Role of Carbon Nanomaterials on Enhancing the Supercapacitive Performance of Manganese Oxide-Based Composite Electrodes

Improved electrochemical performance of defect induced supercapacitor electrodes based on MnS incorporated MnO2 nanorod

Enhanced Electrochemical Performance of Mn3O4/Multiwalled Carbon Nanotube Nanocomposite for Supercapacitor Applications

Delocalizing the d-electrons spin states of Mn site in MnO2 for anion-intercalation energy storage

Preparation and electrochemical performance of MnO2 nanorods as electrode materials for supercapacitor

A simple facile synthesis for phase transforming of δ-MnO2 into α-MnO2 and thereby enhancing Na-ion supercapacitive performance

Investigating the NH4+ Preintercalation and Surface Coordination Effects on MnO2 for Ammonium-Ion Supercapacitors

MnO 2 /Porous Carbon Nanotube/MnO 2 Nanocomposites for High-Performance Supercapacitor

MnOx nanosheets anchored on a bio-derived porous carbon framework for high-performance asymmetric supercapacitors

Coating Mno2 Nanowires by Silver Nanoparticles for an Improvement of Capacitance Performance

Fabrication and electrochemical performance of sodium manganese oxide composite for supercapacitor application