Abstract:Deadbeat predictive control (DBPC) requires accurate model parameters in its application, therefore it is difficult to use DBPC for surface mounted permanent magnet synchronous motor (SPMSM) with uncertain motor parameters. As a solution, this paper proposes a strategy to obtain the needed parameters, and then uses them to achieve DBPC on SPMSMs whose parameters are unknown. A detailed investigation on parameter sensitivity of DBPC is presented, and attention is paid to different influences between the incremental inductance and the apparent inductance. On this basis, parameter configurations in the DBPC are suggested. And novel current-controller-free self-commissioning schemes are proposed to identify the stator resistance together with the stator inductances under different magnetic saturation levels. Compared with existing commissioning schemes that do not depend on current controllers, solutions for commissioning voltage auto-tuning is provided. So the methods are able to automatically decide the amplitudes of the injected voltage for a given motor, and achieve a controllable current feedback during the commissioning. This brings significant convenience for the inductance identification at a specific saturation level. Moreover, the inverter nonlinearity compensation is not needed but still, identification accuracy can be guaranteed. The feasibility and effectiveness of the proposed method are confirmed by the achieved DBPC and the corresponding current tracking performances on two different SPMSMs.

Semiclosed Loop Based on Predictive Current Control for SPMSM Drives During Servo Stamping

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Servo Press Drive using Model Predictive Control of Motor Current

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

Research on short time and heavy load driving system of crank servo press based on feed-forward and decoupling control

Research on Hybrid-loop Servo Control System of Double Toggle Mechanical Press for Achieving Flexible Process

Current control method for PMSM with high dynamic performance

Improved Model Predictive Current Control for SPMSM Drives Using Current Update Mechanism

Current-Controller-Free Self-Commissioning Scheme for Deadbeat Predictive Control in Parametric Uncertain SPMSM

Dual Delay-Compensation-Based Model Predictive Control for the Semi-Controlled Open-Winding PMSM System

Hybrid-loop Servo Control System of Double Toggle Mechanical Press for Flexible Forming Process Based on Sliding Mode Control and Neural Network Techniques.

Time-Delay Compensation Method in PMSM Servo System Based on Predictive Current Control with Sensitivity Analysis

An Improved Deadbeat Predictive Current Control Strategy for Interior Permanent Magnet Synchronous Motors

Enhanced Deadbeat Predictive Current Control for SPMSM Drives Combining Robust Super-Twisting Terminal Sliding Mode Speed Controller

Optimization Design of Predictive Current Control for Permanent Magnet Linear Synchronous Motor

Design and Implementation of a High-Performance PMLSM Control System with Deadbeat Current Control and SMC