Feasibility study on sharpening metal-bond metal diamond grinding tool by microwave-induced electric discharge machining

Jiaying Yan,Shichun Li,Zhi Yang,Bing Chen,Wenjing Cai,Lei Zhou,Qi He,Jie Chen,Wanglin Fang

DOI: https://doi.org/10.1016/j.ceramint.2022.11.050

IF: 5.532

2023-03-01

Ceramics International

Abstract:Microwave-induced electric discharge machining (MV-EDM) is an emerging machining method that can be applied to fine machining of metal materials. A feasibility analysis of the application of MV-EDM to sharpen diamond grinding tools was conducted in this study. A multiphysical simulation model for sharpening using MV-EDM was established, and MV-EDM sharpening experiments and measurements were performed to verify the accuracy of the simulation model. It was found that MV-EDM can effectively improve the protrusion height h p and does not result in severe graphitization of diamond grains under appropriate conditions. Under the conditions of a microwave power of 1 kW and a gap scale d of 0.1 mm, the h p of the diamond grain increased to 91 μm with a complete diamond crystal shape and slight graphitization. In addition, it was discovered that the gap scale d and initial protrusion height h 0 had a significant effect on the protrusion height h p and the graphitization of the diamond grains. After verification, the accuracy of the simulation model for calculating the protrusion height of diamond grains was controlled within a range of ±15 μm. The results of this study provide a theoretical basis for the industrial application of MV-EDM to sharpening.

materials science, ceramics