Abstract:The novel 3D microfluidic concept of "lab-on-hollow fiber membrane (HFM)" was presented for multifunctional and rapid biological assays, integrating sample size sieving and colorimetric quantification in a HFM. Herein, micro-porous HFMs with a gradient pore size and high hydrophilic flux were used as microfluidic device substrates. The membrane pores selectively trapped macromolecules within the inner surface, while allowing free diffusion of smaller molecules, including glucose and protein. The microfluidic flow rate in HFM closely followed the Lucas-Washburn and Laplace's models, indicating that the microfluidics facilitated the upward flow of the fluid by micro-capillary action without external pumping. Subsequently, for sensing of different biomolecules, a highly sensitive fluorescent or optical chromogenic reagent was immobilized in HFM by an electrostatic interaction. Pyronin G fluorescence reagent was quenched by blood glucose and the quenching efficiency showed a good linear correlation with glucose concentration (1~22 mM, R2=0.997). Moreover, this sensing platform was then further applied for the analysis of urine protein or glucose in the visible spectrum, with wide testing range. Compared to traditional 2D flat membrane devices, this 3D-HFM microfluidic device exhibited excellent sensing versatility and color rendering uniformity with enhanced sensitivity. Target molecules screening, conditioning, enzymatic recognition, and signal readout of biomolecules have all been implemented on this device, which has paved the way to highly sensitive assays on POCT. KEYWORDS: hollow fiber membrane (HFM), lab-on-HFM, glucose, micro-capillary action, point-of-care-testing (POCT).

Microwave Characterization of Glucose Level Using Composite PMS-HMSIW Cavity Resonator Integrated With Microfluidic Channel

A Wireless-Electrodeless Quartz Crystal Microbalance Method for Non-Enzymatic Glucose Monitoring

A wireless acoustic wave sensor modified with biocompatible polymer for glucose monitoring

High-Sensitivity, Quantified, Linear and Mediator-Free Resonator-Based Microwave Biosensor for Glucose Detection

Three-dimensional Microporous Hollow Fiber Membrane Microfluidic Device Integrated with Selective Separation and Capillary Self-Driven for Point-of-care Testing.

Miniaturized Multiband Planar Sensor Based on Transmission Line Loaded With Pairs of Improved Resonators for Glucose-Aqueous Solution Sensing Applications

Contactless Glucose Sensing at Sub‐Micromole Level Using a Deep‐Subwavelength Decimeter‐Wave Plasmonic Resonator

The glucose sensor integratable in the microchannel

Novel glucose concentration sensor with unique resonance lineshapes in optical cavity

Enhanced sensitivity of wired and wireless measurement for liquid concentration based on a modified cylindrical cavity

Glucose Levels Sensing using Whispering Gallery Modes at mm-Wave Band

High Sensitivity Detection Method for Liquid Concentrations Based on Coupled Microwave Resonators

Triple-Poles Complementary Split Ring Resonator for Sensing Diabetics Glucose Levels at cm-Band

A miniature and reusable radiofrequency biosensor combining microfluidic and integrated passive technology for glucose detection

Frequency selective metasurface based radio frequency glucose sensor with a periodic array of meta cells

Highly Sensitive Closed Loop Enclosed Split Ring Biosensor With High Field Confinement for Aqueous and Blood-Glucose Measurements

3D hybrid arrayed Ag/MOF multi-plasmon resonant cavity system for high-performance SPR sensing

Dual-Channel SPR Sensor Based on MSM Fiber for Detection of Glucose Concentration and Temperature

Microwave substrate integrated waveguide resonator sensor for non-invasive monitoring of blood glucose concentration: Low cost and painless tool for diabetics

All-silicon periodic and non-periodic THz metasurface for sensing applications

Cross enclosed square split ring resonator based on D.N.G. metamaterial absorber for X-band glucose sensing application