Abstract:Monitoring glucose levels is one of the main diagnostic methods for preventing and treating diabetes. Conventionally monitoring of blood glucose through a finger-stick procedure brings pain. It is essential to develop biosensors for low concentration glucose detection in non-invasive samples. In this paper, a tilted fiber grating based localized surface plasmon resonance (LSPR) biosensor for ultrasensitive glucose detection has been demonstrated. The glucose biosensor was fabricated by immobilization of Au nanoparticles (AuNPs) onto an excessively tilted fiber grating (Ex-TFG) and subsequent biofunctionalization by coating polydopamine and concanavalin A onto the AuNPs/Ex-TFG surface. The biosensor has the response regions covering low, middle and high glucose concentrations. The resonance peak indicates a redshift of 0.24 nm, 0.06 nm and 0.48 nm in the concentration ranges of 1.0 nM $- 1.0\,\, \boldsymbol {\mu }\text{M}$ , $1.0\,\, \boldsymbol {\mu }\text{M}- 50.0\,\, \boldsymbol {\mu }\text{M}$ and $50.0\,\, \boldsymbol {\mu }\text{M}-5.0$ mM, respectively. The limit of detection (LOD) of the biosensor in pure phosphate buffered saline is 2.5 nM. The high sensitivity and specific selectivity for D-glucose detection are attributed to strong coupling between the evanescent fields from transverse magnetic (TM) cladding modes of the Ex-TFG and the localized electric fields from LSPR of the AuNPs and their biofunctionalization, and resulting in remarkable enhancement of localized effective refractive index with slightly increased D-glucose concentration. Especially, the glucose biosensor based on the Ex-TFG coupled with the biofunctionalized AuNPs, has been demonstrated to be of practical utility to detect the glucose in artificial urine, which has potential applications in non-invasive glucose monitoring for early diagnosis and better management of diabetes.

3D hybrid arrayed Ag/MOF multi-plasmon resonant cavity system for high-performance SPR sensing

MgF2–Au–MgF2-polydopamine Based Surface Plasmon Resonance Sensor and Its Application in Biomedical Systems

A Symmetrical Optical Waveguide Based Surface Plasmon Resonance Biosensing System

Plasmonic Nano-Arrays for Ultrasensitive Bio-Sensing

Performance Enhancement of SPR Biosensor Using Graphene–MoS2 Hybrid Structure

Theoretical and Experimental Study of a Highly Sensitive SPR Biosensor Based on Au Grating and Au Film Coupling Structure

A saccharides sensor developed by symmetrical optical waveguide-based surface plasmon resonance

Highly sensitive surface plasmon resonance sensor with surface modified MoSe 2 /ZnO composite film for non-enzymatic glucose detection

Highly efficient MIM based SPR sensor for glucose detection using blueP/WS2 layers

Silver-coated Hollow Fiber Surface Plasmon Resonance Sensor for Glucose Detection with Enhanced Limit of Detection.

In-situ Dual-Channel Surface Plasmon Resonance Fiber Sensor for Temperature-Compensated Detection of Glucose Concentration

Optical Fiber SPR Biosensor with a Solid-Phase Enzymatic Reaction Device for Glucose Detection

Design and Performance of a Portable and Multichannel SPR Device

A Flexible Nanostructured Multimodal Sensor Based on Surface Plasmon Resonance

Dual-Channel SPR Sensor Based on MSM Fiber for Detection of Glucose Concentration and Temperature

Low-cost and high sensitivity glucose sandwich detection using a plasmonic nanodisk metasurface

Advanced High-Performance Biochemical Sensor: Synchronous SPR Excitation with Parallel Multiple Single-Mode Fibers (SMFs)

Ultrasensitive Glucose Biosensor Using Micro-Nano Interface of Tilted Fiber Grating Coupled with Biofunctionalized Au Nanoparticles

A BIOSENSOR USING COUPLED PLASMON WAVEGUIDE RESONANCE COMBINED WITH HYPERSPECTRAL FLUORESCENCE ANALYSIS

Label-Free Micro Probe Optical Fiber Biosensor for Selective and Highly Sensitive Glucose Detection

Design of a high-performance graphene/SiO2-Ag periodic grating/MoS2 surface plasmon resonance sensor.