Abstract:This article presents a high-sensitivity, quantified, linear, and mediator-free resonator-based microwave biosensor for glucose sensing application. The proposed biosensor comprises an air-bridge-type asymmetrical differential inductor (L) and a center-loaded circular finger-based inter-digital capacitor (C) fabricated on Gallium Arsenide (GaAs) substrate using advanced micro-fabrication technology. The intertwined asymmetrical differential inductor is used to achieve a high inductance value with a suitable Q-factor, and the centralized inter-digital capacitor is introduced to generate an intensified electric field. The designed microwave sensor is optimized to operate at a low resonating frequency that increases the electric field penetration depth and interaction area in the glucose sample. The microwave biosensor is tested with different glucose concentrations (0.3–5 mg/ml), under different ambient temperatures (10–50 °C). The involvement of advanced micro-fabrication technology effectively miniaturized the microwave biosensor (0.006λ0 × 0.005λ0) and enhanced its filling factor. The proposed microwave biosensor demonstrates a high sensitivity of 117.5 MHz/mgmL-1 with a linear response (r2 = 0.9987), good amplitude variation of 0.49 dB/mgmL-1 with a linear response (r2 = 0.9954), and maximum reproducibility of 0.78% at 2 mg/mL. Additionally, mathematical modelling was performed to estimate the dielectric value of the frequency-dependent glucose sample. The measured and analyzed results indicate that the proposed biosensor is suitable for real-time blood glucose detection measurements.

Microwave substrate integrated waveguide resonator sensor for non-invasive monitoring of blood glucose concentration: Low cost and painless tool for diabetics

A wireless acoustic wave sensor modified with biocompatible polymer for glucose monitoring

A Wireless-Electrodeless Quartz Crystal Microbalance Method for Non-Enzymatic Glucose Monitoring

High-Sensitivity, Quantified, Linear and Mediator-Free Resonator-Based Microwave Biosensor for Glucose Detection

Triple-Poles Complementary Split Ring Resonator for Sensing Diabetics Glucose Levels at cm-Band

Reusable, Non-Invasive, And Ultrafast Radio Frequency Biosensor Based On Optimized Integrated Passive Device Fabrication Process For Quantitative Detection Of Glucose Levels

A Reusable Robust Radio Frequency Biosensor Using Microwave Resonator by Integrated Passive Device Technology for Quantitative Detection of Glucose Level.

Design of microstrip sensor for non invasive blood glucose monitoring

Sensitivity evaluation of miniature microstrip line‐based sensors using multiple sensing parameters for non‐invasive blood glucose monitoring

Highly Sensitive Closed Loop Enclosed Split Ring Biosensor With High Field Confinement for Aqueous and Blood-Glucose Measurements

A miniature and reusable radiofrequency biosensor combining microfluidic and integrated passive technology for glucose detection

Rapid, Sensitive and Reusable Detection of Glucose by a Robust Radiofrequency Integrated Passive Device Biosensor Chip

Design and Human Trials of Microwave Noninvasive Blood Glucose Detection Sensor

Cross enclosed square split ring resonator based on D.N.G. metamaterial absorber for X-band glucose sensing application

Additively manufactured microwave sensor for glucose level detection in saliva

Rapid and sensitive detection of glucose based on radio frequency resonator fabricated using integrated passive device technology

Low-cost microstrip sensor based on coupled step line (CSL) resonator for blood plasma glucose determination

Accurate Blood Glucose Level Monitoring Using Microwave Imaging

Development of a Battery-Free, Chipless, and Highly Sensitive Radio Frequency Glucose Biosensor

Skin-Patchable Electromagnetic Biosensors for Noninvasive and Wireless Glucose Monitoring

Blood glucose concentration measurement without finger pricking