Abstract:In this paper, we proposed a roadmap of the need for silver reduction in industrial silicon solar cells in the TW era. Several metallization approaches towards an intermediate and long‐term target level of 5 mg/W and 2 mg/W have been systematically discussed. Secondly, we presented a promising hybrid metallization design by combining the advantages of screen‐printing and plating technologies to significantly reduce silver consumption thereby achieving the target value of 5 mg/W for TOPCon and 2 mg/W for PERC solar cells. As PV manufacturing heads towards the multi‐TW scale, it is required to carefully evaluate a wide range of concepts including not only efficiency and cost but also material consumption to ensure sustainable manufacturing of PV technologies. The rapid growth of PV could significantly increase the demand for several materials required in solar cells such as silver, aluminium, copper and even silicon, thereby causing dramatic price fluctuations. Furthermore, the PV manufacturing capacity would be at risk of being limited by the supply of some scarce metals, e.g. with current industrial implementations – screen printing (SP) metallization, the capacities of PERC and TOPCon could be capped at 377 GW and 227 GW with 20% of global silver supply available to the PV industry. In addition, PV systems have ~25–30 years lifespan to ensure low LCOE and emissions. Recycling alone will not provide an immediate solution to overcome the limitation of material consumption in the exponentially growing PV market. It is expected that the Ag usage needs to be reduced to no more than 5 mg/W or even 2 mg/W for all solar cell technologies to allow a multi‐TW manufacturing scale without depleting the global silver supply. Therefore, further advancements in metallization technologies are critically and urgently required to significantly reduce the silver consumption of current screen‐printed contacts in industrial silicon solar cells. This paper firstly presents a roadmap towards the 5 mg/W and 2 mg/W silver consumption targets with various metallization technologies and screen‐printing designs. Subsequently, a hybrid plating on screen‐printed metallization design was proposed to improve the performance and reduce the silver consumption of screen‐printed contacts. The experimental results have demonstrated up to 1.08%abs improvements in fill factor and 0.3%abs gains in cell efficiency. In addition, up to 40%rel reductions in finger silver consumption have been achieved without any sacrifices in the electrical conductivity of such hybrid screen‐printed and plated fingers. This work proposes not only a roadmap but also a promising approach to significantly reduce the Ag demand and benefit sustainable production of industrial screen‐printed silicon solar cells in the TW era.

Developing Screen-Printing Processes for Silver Electrodes Towards All-Solution Coating Processes for Solar Cells

Printed Light-Trapping Nanorelief Cu Electrodes for Full-Solution-Processed Flexible Organic Solar Cells

Ultra‐Lean Silver Screen‐Printing for Sustainable Terawatt‐Scale Photovoltaic

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes

Solution-processed Composite Electrodes Composed of Silver Nanowires and Aluminum-Doped Zinc Oxide Nanoparticles for Thin-Film Solar Cells Applications

Silver‐lean metallization and hybrid contacts via plating on screen‐printed metal for silicon solar cells manufacturing

Evaporation‐Free Organic Solar Cells with High Efficiency Enabled by Dry and Nonimmersive Sintering Strategy

Toward Low-Cost, High-Efficiency, and Scalable Organic Solar Cells with Transparent Metal Electrode and Improved Domain Morphology

Screen‐Printing Technology for Scale Manufacturing of Perovskite Solar Cells

Enhanced charge collection of AgNWs-based top electrode to realize high-performance, all-solution processed organic solar cells

Improved Electrical Performance of Low-Temperature-Cured Silver Electrode for Silicon Heterojunction Solar Cells

Fast screen printing and curing process for silicon heterojunction solar cells

Vacuum-Assisted Drying Process for Screen-Printable Carbon Electrodes of Perovskite Solar Cells with Enhanced Performance Based on Cuprous Thiocyanate as a Hole Transporting Layer

Toward Industrial-Scale Production of Perovskite Solar Cells: Screen Printing, Slot-Die Coating, and Emerging Techniques

Perovskite solar cells based on screen-printed thin films

Advanced metallization with low silver consumption for silicon heterojunction solar cells

All Electrospray Printing of Carbon‐Based Cost‐Effective Perovskite Solar Cells

Towards All-Non-Vacuum-Processed Photovoltaic Systems: A Water-Based Screen-Printed Cu(In,Ga)Se2 Photoabsorber with a 6.6% Efficiency