Abstract:In the electrospray‐printed active layer, coffee rings are suppressed via cooling the substrate to prolong the solvent evaporation. Low‐melting‐point alloy is printed as top electrodes by aerosol‐spray. Fully‐sprayed organic solar cells (OSCs) with high performance are achieved. This work demonstrates a facile method for fully‐printed OSCs. Depositing all functional layers (including the top electrode) with spray methods is highly desirable and challenging for the eventual commercialization of organic solar cells (OSCs). This work addresses two key challenges toward fully‐sprayed OSCs: i) the printing of a high‐quality photoactive layer free of coffee rings and ii) the spray of the top electrode without the need of evaporation nor solvents. To eliminate coffee rings caused by individual droplets, the photoactive layer is deposited by electrospray on the cooled substrate. The reduced temperature slows down the solvent evaporation, promotes merging of individual droplets, and suppresses the formation of coffee rings. By optimizing the drying temperature, homogeneous films without coffee rings are obtained. The improved active‐layer morphology facilitates charge transport and reduces recombination. The device prepared by the coldplate‐assisted electrospray reaches a power conversion efficiency (PCE) of 17.13%. In addition, an alloy with the melting point of 62 °C is spray‐printed as the top electrode using an airbrush. The spray process is optimized by the trade‐off between the coverage rate and the film thickness. OSCs with the alloy electrode achieve the highest PCE of 16.26%. The fully‐sprayed OSCs exhibit PCEs up to 15.09%, demonstrating a viable route toward fully‐sprayed OSCs with high‐performance.

Evaporation‐Free Organic Solar Cells with High Efficiency Enabled by Dry and Nonimmersive Sintering Strategy

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Recent Progress in All‐solution‐processed Organic Solar Cells

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area

Enhanced charge collection of AgNWs-based top electrode to realize high-performance, all-solution processed organic solar cells

Toward Low-Cost, High-Efficiency, and Scalable Organic Solar Cells with Transparent Metal Electrode and Improved Domain Morphology

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Efficient Fully‐Sprayed Organic Solar Cells with Coffee‐Ring‐Free Photoactive Layer and Alloy Top‐Electrode

Efficient organic solar cells enabled by sustainable and synergetic device engineering

Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

All-solution-processed flexible semitransparent organic solar cells based on sprayed silver nanowire composites as top electrodes

Solution-Processed Transparent Conducting Electrodes for Flexible Organic Solar Cells with 16.61% Efficiency

Green‐Solvent‐Processed Organic Solar Cells with Approaching 20% Efficiency and Improved Photostability

A Bottom-up Understanding of the Ligand-dominated Formation of Metallic Nanoparticle Electrodes with High Broadband Reflectance for Enabling Fully Solution-processed Large-area Organic Solar Cells

Efficient and stable organic solar cells based on all-solution-processed metal oxide transport layers

Toward Highly Efficient Large-Area ITO-Free Organic Solar Cells with a Conductance-Gradient Transparent Electrode.

Complete Solution-Processed Semitransparent and Flexible Organic Solar Cells: A Success of Polyimide/Ag-Nanowires- and PH1000-Based Electrodes with Plasmonic Enhanced Light Absorption

Hot Hydrocarbon‐Solvent Slot‐Die Coating Enables High‐Efficiency Organic Solar Cells with Temperature‐Dependent Aggregation Behavior