Abstract:The research presents an analysis and comparison of the Taguchi Design and Response Surface Methodology (RSM) in optimizing the laser cutting machine parameters on dimension accuracy for stainless steel products. The paper studies effects of input factors such as cutting speed, nitrogen pressure, power, and frequency on the quality cutting of stainless steel (304) specimens. In this paper, two objectives are examined: targeting laser-cut edge to perpendicular 90 degrees and maximizing the cutting accuracy. The paper proposes a simple formula to optimize both targets by minimizing one new function definition, i.e., dimensional error. An L9 orthogonal array of Taguchi Methodology is adopted to minimize the number of experiments and shorten analysis time to achieve the optimal parameters. These results are compared with RSM. Box–Behnken Design (BBD) type of RSM requires more experiments than the Taguchi approach. RSM regression models as the quadratic functions of the control factors are developed to minimize the dimensional error of cutting products. Then, Analysis of Variance (ANOVA) and graphs will be analyzed to determine the influences of variables on the responses. Both Taguchi's method and RSM found that the most influential factor on dimension accuracy is cutting speed, followed by laser power. While Taguchi provides good graphic visualization for quickly predicting the optimum condition, it cannot examine the interaction effects as RSM due to the lack of data. Besides, RSM reveals the percentage contribution of factors on dimensional error. Cutting speed has a maximum contribution, i.e., 39% of the total. The interaction of cutting speed and power contributes 16% of the total. In this study, RSM can predict optimum conditions more accurately than Taguchi. There are misleading results from the Taguchi method compared with RSM. However, the difference between these objective values is insignificant. The validation experiments show that the Taguchi method can be a practical approach for optimization problems. It can help reduce cost and time and achieve the desired optimal outputs. With cutting problems requiring high precision, the RSM method is highly recommended for identifying optimal parameter settings and interaction effects. With problems that their experimental runs consume high cost and time, Taguchi can be a suitable method for screening the significant variables. Although Taguchi and RSM are used widely for optimization problems in many fields, choosing the right methodology for various objectives is still a concern with different arguments and needs further research. Therefore, this study could be an adequate reference for parameter optimization problems in various fields.

Minimization of Milling-Induced Residual Stresses in AISI 1045 Steel: Process Optimization using Design of Experiments Taguchi Method

Optimization of Cryogenic Process Parameters for the Minimization of Surface Residual Stress in Pure Iron Using Taguchi Design

Modeling and optimization of surface residual stress profiles in milling of aluminum 7075-T6 alloy

Modelling and Optimization of Machining of Ti-6Al-4V Titanium Alloy Using Machine Learning and Design of Experiments Methods

Finite element based model for predicting induced residual stresses and cutting forces in AISI 1020 steel alloy

Machining-induced residual stress analysis and multi-objective optimization for milling process of Mg–Li alloy

Optimized Material Removal and Tool Wear Rates in Milling API 5ST TS-90 Alloy: AI-Driven Optimization and Modelling with ANN, ANFIS, and RSM

Study on Residual Stress Produced in Milling of Aeronautic Structure

Optimization of Machining Parameters in Mild Steel Turning Operation by Response Surface Methodology

Modeling of Residual Stress During EDM of AISI 4340 for Marine Propulsion Application

Effects of Processing Parameters and Tool Geometric Parameters on Residual Stress of Machined 304 Stainless Steel

Multi-Objective Optimization of AISI P20 Mold Steel Machining in Dry Conditions Using Machine Learning—TOPSIS Approach

Multiobjective Optimization of Experimental and Simulated Residual Stresses in Turning of Nickel-Alloy IN100

Optimization of machining parameters while turning AISI316 stainless steel using response surface methodology

Optimization of Surface Quality and Power Consumption in Machining Hardened AISI 4340 Steel

Optimization of Process Parameters for Laser Cutting Process of Stainless Steel 304: A Comparative Analysis and Estimation with Taguchi Method and Response Surface Methodology

Optimization of Bobbin Tool Friction Stir Processing Parameters of AA1050 Using Response Surface Methodology

Minimization of Surface Roughness and Residual Stress in Grinding Operations of Inconel 718

Design and optimization of process parameters for hard turning of AISI 304 stainless steel using Taguchi-GRA-PCA

Turning of 42CrMo4+QT under different scenarios: Dataset of machining, roughness and residual stress

Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718