Abstract:Yttrium stabilized zirconia (YSZ) as a typical oxygen ionic conductor has been widely used as the electrolyte for solid oxide fuel cell (SOFC) at the temperature higher than 1000 °C, but its poor ionic conductivity at lower temperature (500–800 °C) limits SOFC commercialization. Compared with oxide ionic transport, protons conduction are more transportable at low temperatures due to lower activation energy, which delivered enormous potential in the low-temperature SOFC application. In order to increase the proton conductivity of YSZ-based electrolyte, we introduced semiconductor ZnO into YSZ electrolyte layer to construct heterointerface between semiconductor and ionic conductor. Study results revealed that the heterointerface between ZnO and YSZ provided a large number of oxygen vacancies. When the mass ratio of YSZ to ZnO was 5:5, the fuel cell achieved the best performance. The maximum power density (Pmax) of this fuel cell achieved 721 mW cm−2 at 550 °C, whereas the Pmax of the fuel cell with pure YSZ electrolyte was only 290 mW cm−2. Further investigation revealed that this composite electrolyte possessed poor O2− conductivity but good proton conductivity of 0.047 S cm−1 at 550 °C. The ionic conduction activation energy of 5YSZ-5ZnO composite in fuel cell atmosphere was only 0.62 eV. This work provides an alternative way to improve the ionic conductivity of YSZ-based electrolytes at low operating temperatures.

Proton conductive YSZ-phosphate composite electrolyte for H2S SOFC

A Stable Nh4po3-Glass Proton Conductor for Intermediate Temperature Fuel Cells

Cyo-Bzcyo Composites With Enhanced Proton Conductivity: Candidate Electrolytes For Low-Temperature Solid Oxide Fuel Cells

A Cobalt-Free Sm0.5Sr0.5FeO3−δ–BaZr0.1Ce0.7Y0.2O3−δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Efficiently enhance the proton conductivity of YSZ-based electrolyte for low temperature solid oxide fuel cell

A H3PO4-doped Polytetrafluoroethylene/sn0.95mg0.05p2o7 Proton-Conducting Inorganic–organic Composite Electrolyte

A Novel Cesium Hydrogen Sulfate–zeolite Inorganic Composite Electrolyte Membrane for Polymer Electrolyte Membrane Fuel Cell Application

A Cobalt-Free SrFe0.9Sb0.1O3−δ Cathode Material for Proton-Conducting Solid Oxide Fuel Cells with Stable BaZr0.1Ce0.7Y0.1Yb0.1O3−δ Electrolyte

Composite electrolyte with proton conductivity for low-temperature solid oxide fuel cell

LaCrO3–VOx–YSZ Anode Material for Solid Oxide Fuel Cells Operating on H2S-containing Syngas

Metal-supported Solid Oxide Fuel Cells with In-Situ Sintered (bi2o3)0.7(er2o3)0.3–ag Composite Cathode

Composite electrolyte used for low temperature SOFCs to work at 390°C

A Cobalt-Free Sm0.5Sr0.5Fe0.8Cu0.2O3−δ–Ce0.8Sm0.2O2−δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

A Proton Conductor Electrolyte Based on Molten CsH5(PO4)2 for Intermediate-Temperature Fuel Cells

A CsH 2 PO 4 -Based Composite Electrolyte Membrane for Intermediate Temperature Fuel Cells

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

A Flexible CsH5(PO4)2-Doped Composite Electrolyte Membrane for Intermediate-Temperature Fuel Cells

Pentlandite-MoS2 As Sulfur Tolerant Anode Materials for Solid Oxide Fuel Cells

High Performance La0.5(Ba0.2Sr0.2Ca0.1)Co0.8Fe0.2O3-δ- BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Fabrication and Characterization of Solid State Proton Conductor (nh4)2sip4o13–nh4po3 for Fuel Cells Operated at 150–250 °C

Anhydrous Proton Conducting Materials Based on Sulfonated Dimethylphenethylchlorosilane Grafted Mesoporous Silica/ionic Liquid Composite.