Abstract:Currently, the Cu-based catalyst has become a promising candidate for ethanol and higher alcohols synthesis (HAs) from synthesis gas (H2 + CO), but all these catalysts contain F–T elements (e.g., Co and Fe) and alkalis because carbon chain growth reaction occurs on these metal components. Herein, two series of ternary CuZnAlOOH catalysts with various Cu and Al proportions were synthesized using a complete liquid-phase method and studied in the conversion of syngas in a slurry bed reactor. Significantly higher selectivity of ethanol (40 wt %) and HA (65 wt %) with approximately 20% CO conversion was achieved when the n(Cu)/n(Al) = 2/0.8, which was ascribed the highest copper surface area (SCu) and the surface Cu content. It was found that the Cu component had a significant effect on CO conversion, while the Al component had more influence on the selectivity of HA. Besides, the coke deposition was discovered to be the main reason for catalyst deactivation. The generation of hydrocarbons and alcohols followed A–S–F distributions, which was consistent with a representative mechanism of HA generation by CO insertion into the CHx intermediate. A synergetic mechanism between Cu0–Cu+ and AlOOH active sites was proposed based on the characterization analysis and activity results, in which Cu0–Cu+ synergy acted as sites for H2 dissociative adsorption and associative adsorption of CO, while the AlOOH facilitated the dissociation of the C–O bond. Bifunctionality of the Cu and AlOOH active sites and their cooperation created their synergy in CO hydrogenation to ethanol and HA. This work provided us a new concept to understand and develop carbon chain growth mechanism, and it also could provide reference for other related carbon chain growth reactions.

Copper-iron-based catalytic composition for the conversion of syngas to higher alcohols and process using such catalyst composition

Direct Conversion of Syngas to Higher Alcohols over Multifunctional Catalyst: The Role of Copper-Based Component and Catalytic Mechanism

Heterogeneous Catalytic Conversion of Dry Syngas to Ethanol and Higher Alcohols on Cu-Based Catalysts

Carbon Nanotube-Supported Copper-Cobalt Catalyst for the Production of Higher Carbon Number Alcohols Through Carbon Monoxide Hydrogenation

Cu-Promoted Iron Catalysts Supported on Nanorod-Structured Mn-Ce Mixed Oxides for Higher Alcohol Synthesis from Syngas

Synthesis Of Higher Alcohol Mixtures From Syngas Over Modified Copper Catalysts

Syngas conversion to higher alcohols via wood-framed Cu/Co-carbon catalyst

The Support Effects on the Direct Conversion of Syngas to Higher Alcohol Synthesis over Copper-Based Catalysts

Higher alcohols synthesis from syngas over P-promoted non-noble metal Cu-based catalyst

Perovskite-derived trimetallic Co-Ni-Cu catalyst for higher alcohol synthesis from syngas

Monometallic iron catalysts with synergistic Na and S for higher alcohols synthesis via CO2 hydrogenation

Interfacial Fe5C2-Cu catalysts toward low-pressure syngas conversion to long-chain alcohols

Catalytic conversion of syngas to mixed alcohols over CuFe-based catalysts derived from layered double hydroxides

Design and Synthesis of Spherical-Platelike Ternary Copper-Cobalt-manganese Catalysts for Direct Conversion of Syngas to Ethanol and Higher Alcohols

Synergy between Active Sites of Ternary CuZnAlOOH Catalysts in CO Hydrogenation to Ethanol and Higher Alcohols

Hydrophobic dual metal silicate nanotubes for higher alcohol synthesis

Ternary copper–cobalt–cerium catalyst for the production of ethanol and higher alcohols through CO hydrogenation

CuZnAl@S-1 Catalyst for the Synthesis of Higher Alcohols by CO Hydrogenation