Abstract:In this investigation, a series of Na0.5Bi0.47Sr0.02TiO3-δ samples are sintered from1000 to 1100°C, were synthesized utilizing the solid-state method. The XRD results indicate that all samples exhibit a perovskite phase, with the exception of those sintered at 1100 °C, which display no discernible impurity peaks.The SEM results indicate that the average grain size exhibits an increase proportionate to the sintering temperature,which attributes to the variations in the actual Na/Bi ratio. From the study of grain conductivity we can obtain that the dominant factor affecting grain conductivity is the activation energy.At 1100°C,the oxygen vacancy concentration emerges as the primary determinant of grain conductivity. It should be noticed that the phase transition temperature of the sample increases (350°C→400°C) with the increase of sintering temperature, which is due to the local A-site disorder aggravated by high temperature sintering. Therefore, reducing the sintering temperature is beneficial to improve the grain conductivity. The grain boundary conductivity initially rises, then diminishes with increasing sintering temperature.It is evident that the enhanced macroscopic grain boundary conductivity stems from a marked reduction in space charge potential within the 1000-1025°C temperature range. Within the 1050°C-1100°C temperature range,the space charge potential barely changed,the significant decrease of intrinsic grain boundary conductivity can be attributed to the surge in the coverage ratio of grain boundary impurities and the number of grain boundary impurities increased caused by the rapid reduction of grain boundary area and thermal evaporation.The research on electrical performance of NBT-based oxygen-ion conductors will promote the application of NBT-based oxygen ion conductors in solid oxide fuel cells, oxygen sensors and other fields.

Structure and electrical conductivity of 0.5CSBT-0.5BFO ceramics sintered in air and N2

Effect of the Sintering Temperatures on the Properties of the Ca0.6Sr0.4Bi4Ti4O15 Ferroelectric Ceramics

Investigation of electrical conductivity and oxygen relaxation behavior for BaBi0.98Sr0.02Nb5-xTixO15-δ ceramics

Sintering Behavior and Dielectric Property of BST-BSL Composite Ceramics

The influence of sintering temperature on structural and electrical properties of x (Ca0.28Ba0.72)Nb2O6-(1-x) (Sr0.61Ba0.39)Nb2O6 ceramics

From structure to conduction mechanism: investigating the effect of sintering atmosphere and the role of Mn in Ca0.6Sr0.4TiO3 ceramics

Electrical Conduction Mechanisms and Effect of Atmosphere Annealing on the Electrical Properties of BiFeO3-BaTiO3 Ceramics

Microstructure and dielectric properties of 0.99(0.94Bi0.47Na0.47Ba0.06TiO3-0.06BiAlO3)-0.01NaNbO3 lead-free ceramics via different methods

Effect of Sintering Temperature on Microstructure and Electrical Properties of Na0.5Bi0.47Sr0.02TiO3-δ Ceramics

Structures and Temperature-Dependent Electrical Properties in Ba0.8Sr0.2TiO3–BiAlO3 Electrostrictive Ceramics

Impedance Spectroscopy and Electrical Conductivity of 0.7Bi(1-X)ndxfeo3-0.3batio3 Ferroelectric Ceramics

Structure and electrical properties of strontium barium niobate ceramics

Dielectric, ferroelectric, piezoelectric properties, and conduction behavior of (Bi0.5Na0.5)0.94+xBa0.06TiO3 ceramics

Effect of Different Sintering Temperatures on the Electrical Properties of SBTi Ferroelectric Ceramics

Intermediate-temperature conductivity of B-site doped Na0.5Bi0.5TiO3-based lead-free ferroelectric ceramics

Influences of Sintering Atmosphere on the Magnetic and Electrical Properties of Barium Hexaferrites

Low-Temperature Sintering of Bi(Ni0.5Ti0.5)O3-BiFeO3-Pb(Zr0.5Ti0.5)O3 Ceramics and Their Performance

Effect of oxygen sintering atmosphere on the electrical behavior of CCTO ceramics

Synthesis, structural stability and phase diagram of BiFeO3–CaSnO3 ceramics

Structural, Electrical, Magnetic and Impedance Behaviour of NdFeO3 Modified Ba0.7Sr0.3TiO3 Ceramics

The Structure and Dielectric Properties of Na Doped Bi2o3-Zno-Nb2o5 Ceramics