Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Development of Rubber Pressure Molding Technique using Silicone Rubber to Fabricate Fiber-reinforced Plastic Components Based on Glass Fiber and Epoxy Resin

Development of Rubber Pressure Molding Technique using Butyl Rubber to Fabricate Fiber Reinforced Plastic Components based on Glass Fiber and Polyester Resin

Effect of rubber hardness on the properties of fiber reinforced plastic composites made by the newly proposed rubber pressure molding technique

Analysis of rubber pressure molding technique to fabricate fiber reinforced plastic components

Pressure distribution analysis of fiber reinforced plastic components made by rubber pressure moulding technique

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Improved Interfacial Adhesion And Manufaturing Method Of Mgf/P-Dcpd Composites Using W, Mo, Or Ru Type Catalysts In Air Condition

Pressure Transfer Behaviour of Rubber Mould and the Effects on Consolidation of L-Shape Composite Laminates

Preparation of High-Performance Carbon Fiber-Reinforced Epoxy Composites by Compression Resin Transfer Molding

Structure and Properties of Particles/rubber Composites Applied on Functionally Graded Lapping and Polishing Plate

Resin Infusion Between Double Flexible Tooling: Evaluation of Process Parameters

Micro-Injection Molding of Carbon-Fiber-Reinforced Plastic (CFRP)/Polymethyl Methacrylate (PMMA) Composite Components

An Experimental Study of the Properties of Carbon Fiber/Epoxy Composites Mixed with Rubber Granules

Fabrication and Characterization of Acrylonitrile Butadiene Rubber and Stitched E-Glass Fibre Tailored Nano-Silica Epoxy Resin Composite

Optimization of Drilling Parameters of GFRP with Liquid Silicone Rubber and Fine Silica Powder by Taguchi Approach

Rapid Vacuum Infusion and Curing of Epoxy Composites with A Rubber-Cushioned Mold Design

An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding

Investigation of mechanical properties of luffa fibre reinforced natural rubber composites: Implications of process parameters

Preparation Optimization of CFRP and EPDM Composite by the Co-Curing Method

FABRICATING SQUARE TUBE OF CARBON FIBER COMPOSITES USING THERMAL EXPANSION PROCESS WITH SILICONE RUBBER

Fabrication of the Fresnel lens with liquid silicone rubber using rapid injection mold