Abstract:Large-scale distributed thermal storage requires high-energy-density and low-cost thermal storage materials. Here, a concocted composite composed of Al2(SO4)3·18H2O and FeSO4·7H2O salts, as well as carbon nanotubes (CNTs) as a thermal conductive agent has been proposed for the applications of large-scale distributed thermal storage. The composite was physically mixed but displayed enhanced structural stability due to the use of carbon nanotubes that formed networks in the composite. The use of CNTs could restrain the volume change of the salt mixture in thermal charge/discharge. The detailed thermophysical properties and thermal energy storage performance were studied, including latent heat, thermal conductivity, and thermal cycling stability. A differential scanning calorimeter (DSC) revealed that the largely endothermic temperature and absorbed heat of the composite were 118.43 °C and 422.40 J g–1, and it also delivered a high stability of ca. almost no capacity fading in exampled 100 cycles. The introduction of the carbon nanotube creates thermal conductivity networks in the composite, endowing the composite material with enhanced thermal conductivities. This can provide rapid thermal storage while retaining the storage density. This study can give insights into the rational design of salt hydrates for thermal storage.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00199?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00199</a>.DSC curves and the corresponding thermal energy of pure Al2(SO4)3·18H2O and FeSO4·7H2O and the composites composed of Al2(SO4)3·18H2O and FeSO4·7H2O at various ratios; XRD patterns and the FT-IR spectrum of pure Al2(SO4)3·18H2O and FeSO4·7H2O compared with the obtained Al2(SO4)3·18H2O–FeSO4·7H2O–CNT composite; and thermophysical properties of the Al2(SO4)3·18H2O–FeSO4·7H2O composite at various ratios measured at 5 °C min–1 (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00199/suppl_file/ae1c00199_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation and property measurement of ternary eutectic sodium salt with multiwalled carbon nanotubes

Thermophysical Properties of Paraffin-Based Composite Phase Change Materials Filled with Carbon Nanotubes

Thermal energy storage properties of carbon nanotubes/sodium acetate trihydrate/sodium monohydrogen phosphate dodecahydrate composite phase-change materials as promising heat storage materials

Thermophysical Properties of LiF–LiCl–Li2CO3 Eutectic Mixture/multi-Walled Carbon Nanotubes for Thermal Energy Storage

Facile Preparation of Binary Salt Hydrates/Carbon Nanotube Composite for Thermal Storage Materials with Enhanced Structural Stability

Preparation and Thermal Properties Characterization of Carbonate Salt/carbon Nanomaterial Composite Phase Change Material

Development and comparison of multi-walled carbon nanotubes and graphite nanoflakes dispersed solar salt: Structural formation and thermophysical properties

Preparation and Thermal Property Characterization of NaCl–Na2CO3–Na2SO4 Eutectic Salt Mixed with Carbon Nanomaterials for Heat Storage

Nitrate based nanocomposite thermal storage materials: Understanding the enhancement of thermophysical properties in thermal energy storage

Nanoadditives induced enhancement of thermal energy storage properties of molten salt: Insights from experiments and molecular dynamics simulations

Nitrate salt-halloysite nanotube (HNT) composite phase change materials for thermal energy storage: The feasibility of material fabrication by using HNT as skeleton substance and its thermal properties

Comprehensive thermal properties of ternary eutectic molten salt/nanoparticles composite phase change materials for high–temperature thermal energy storage

A Novel High Temperature Eutectic Salt and Its Composite with Enhanced High Conductivity

Fabrication and Thermal Conductivity Improvement of Novel Composite Adsorbents Adding with Nanoparticles

Superior Thermal Energy Storage Performance of NaCl-SWCNT Composite Phase Change Materials: A Molecular Dynamics Approach

The effect of 3D carbon nanoadditives on lithium hydroxide monohydrate based composite materials for highly efficient low temperature thermochemical heat storage

Preparation and performance characterization of metal foam/paraffin/ single-walled carbon nanotube composite phase change material

Experimental and Simulation Study on Enhancing Thermal Energy Storage and Heat Transfer Performance of Ternary Chloride Eutectic Salt by Doping MgO Nanoparticles

Composite MWCNT/ MIL-101 (Cr)/CaCl2 as High-Capacity Water Adsorbent for Long-Term Thermal Energy Storage

Effect of Carbon Nanomaterial on Latent Heat Storage Performance of Carbonate Salts in Horizontal Concentric Tube

Enhancement of Thermal Conductivity by the Introduction of Carbon Nanotubes As a Filler in Paraffin/expanded Perlite Form-Stable Phase-Change Materials