Abstract:Large-scale distributed thermal storage requires high-energy-density and low-cost thermal storage materials. Here, a concocted composite composed of Al2(SO4)3·18H2O and FeSO4·7H2O salts, as well as carbon nanotubes (CNTs) as a thermal conductive agent has been proposed for the applications of large-scale distributed thermal storage. The composite was physically mixed but displayed enhanced structural stability due to the use of carbon nanotubes that formed networks in the composite. The use of CNTs could restrain the volume change of the salt mixture in thermal charge/discharge. The detailed thermophysical properties and thermal energy storage performance were studied, including latent heat, thermal conductivity, and thermal cycling stability. A differential scanning calorimeter (DSC) revealed that the largely endothermic temperature and absorbed heat of the composite were 118.43 °C and 422.40 J g–1, and it also delivered a high stability of ca. almost no capacity fading in exampled 100 cycles. The introduction of the carbon nanotube creates thermal conductivity networks in the composite, endowing the composite material with enhanced thermal conductivities. This can provide rapid thermal storage while retaining the storage density. This study can give insights into the rational design of salt hydrates for thermal storage.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00199?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00199</a>.DSC curves and the corresponding thermal energy of pure Al2(SO4)3·18H2O and FeSO4·7H2O and the composites composed of Al2(SO4)3·18H2O and FeSO4·7H2O at various ratios; XRD patterns and the FT-IR spectrum of pure Al2(SO4)3·18H2O and FeSO4·7H2O compared with the obtained Al2(SO4)3·18H2O–FeSO4·7H2O–CNT composite; and thermophysical properties of the Al2(SO4)3·18H2O–FeSO4·7H2O composite at various ratios measured at 5 °C min–1 (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00199/suppl_file/ae1c00199_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of Mental-Doped on Thermal Properties of K2CO3-Na2CO3 Eutectic Salt/magnesium Oxide Composites for Thermal Energy Storage

Effect of bismuth oxide on the thermal storage performance of carbonate/magnesium oxide composite

Study on the Effect of Glass on the Properties of Na2CO3-K2CO3 Eutectic Salt/mgo Composite As Phase Change Thermal Storage Materials

Effect of Nano-Mgo on Thermal and Mechanical Properties of Aluminate Cement Composite Thermal Energy Storage Materials

Performance Analysis of Vermiculite–Potassium Carbonate Composite Materials for Efficient Thermochemical Energy Storage

Molecular Dynamics Simulation of Thermophysical Properties and the Microstructure of Na2CO3 Heat Storage Materials

Alkali Metal Nitrates Promoted MgO Composites with High CO 2 Uptake for Thermochemical Energy Storage

Thermal properties of eutectic salts/ceramics/expanded graphite composite phase change materials for high-temperature thermal energy storage

Preparation and thermal properties of novel inorganic-organic eutectic composite material with high latent heat and thermal conductivity based on aluminum sulfate salt

Synthesis and thermal properties of fatty acid eutectics and diatomite composites as shape-stabilized phase change materials with enhanced thermal conductivity

A Molecular Dynamics Approach and Experimental Validation

Thermophysical Properties' Enhancement of LiNO3-NaNO3-KNO3-NaNO2-KNO2 Mixed with SiO2/MgO Nanoparticles

Facile Preparation of Binary Salt Hydrates/Carbon Nanotube Composite for Thermal Storage Materials with Enhanced Structural Stability

Effect of Morphology and Concentration of Two Carbon Allotropes on the Enhancement of Specific Heat Capacity of Eutectic Molten Salt

Influence of Fe Powders Replacing Cu Powders on the Thermal and Mechanical Properties of Aluminate Cementitious Thermal Energy Storage Materials at High Temperature

Preparation and Thermal Energy Storage Properties of LiNO 3 -Kcl-nano 3 /expanded Graphite Composite Phase Change Material

Evaluation of Thermochemical Energy Storage Performance of Fe-/Mn-Doped, Zr-Stabilized, CaO-Based Composites under Different Thermal Energy Storage Modes

Enhanced Performance of High Temperature Aluminate Cementitious Materials Incorporated with Cu Powders for Thermal Energy Storage

Superior Latent Heat Eutectic Salt Na2CO3-Li2CO3-LiF for Thermal Energy Storage: Preparation and Performance Investigation

Improved Thermophysical and Mechanical Properties in LiNaSO4 Composites for Thermal Energy Storage

Preparation and Characteristics of Na2HPO4·12H2O-K2HPO4·3H2O/SiO2 Composite Phase Change Materials for Thermal Energy Storage