Abstract:Poly(lactic acid) (PLA) was an eco‐friendly and biodegradable material. However, its molecular chain was inflexible and showed limited toughness. In this work, PLA was modified with epoxy‐terminated hyperbranched polymer (EHBP) by melt blending to improve the toughness of PLA. The results showed that epoxy groups within EHBP reacted with carboxyl and hydroxyl groups of PLA, forming chemical micro‐crosslinking. In addition, intermolecular hydrogen bonds were formed between hydroxyl groups on EHBP and PLA, and the combined action of the two ultimately improved the toughness and strength of PLA. Chemical micro‐crosslinking was validated via Fourier transform infrared spectroscopy (FTIR) and gel content analysis. By observing the microscopic morphology of the impact fracture of the blends, it was found that the interface adhesion of the blends increased with the addition of EHBP, enhancing the corresponding mechanical properties. The best interface adhesion was achieved when 2.5 phr EHBP was added to PLA. At this point, compared with neat PLA, the maximum tensile strength, impact strength, elongation at break, and flexural modulus of PLA/EHBP increased by 17.4%, 54.5%, 107.1%, and 25.8% respectively, achieving the goal of simultaneously enhancing the toughness and strength of PLA. The simultaneous improvement in the strength and toughness of PLA expands its potential application value. Poly(lactic acid) (PLA) is an eco‐friendly and biodegradable material. However, its molecular chain was rigid and showed limited toughness. In this work, PLA was modified with epoxy‐terminated hyperbranched polymer (EHBP) by melt blending to improve the toughness. The results showed that epoxy groups within EHBP reacted with carboxyl and hydroxyl groups of PLA, forming chemical micro‐crosslinking. In addition, intermolecular hydrogen bonds were also formed between EHBP and PLA. The combined action of the above two aspects ultimately improved the toughness and strength of PLA. The mechanical property tests results showed that the mechanical properties of PLA improved best when 2.5 phr of EHBP was added. At this point, compared with neat PLA, the maximum tensile strength, impact strength, elongation at break, and flexural modulus of PLA/EHBP increased by 17.4%, 54.5%, 107.1%, and 25.8%, respectively, compared to those of neat PLA. It achieves the goal of simultaneously enhancing the toughness and strength of PLA and subsequently expands its potential application applications.

Dynamically vulcanized poly (lactic acid)/polyurethane/MXene nanocomposites with balanced stiffness and toughness

Supertough poly(lactic acid)/bio-polyurethane blends fabricated by dynamic self-vulcanization of dual difunctional monomers

Fabrication of outstanding mechanical performance engineered poly (lactic acid)/thermoplastic poly(ester)urethane in-situ nanofiber composites with a large-scale industrial innovation methodology

Super-tough polylactic acid blends via tunable dynamic vulcanization of polyurethanes with ultrahigh bio-based content

A super-toughened poly(lactic acid)-based thermoplastic vulcanizate through incorporating modified SiO2 nanoparticles

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Largely toughened poly(lactic acid) fabricated by melt blending with thermoplastic polyurethane through interfacial compatibilization induced by simultaneous addition of hydrophobic silica nanoparticles and in situ cross‐linking reaction

Toughening Modification of Poly(lactic acid) via Melt Blending

Polyethylene Oxide Enhances the Ductility and Toughness of Polylactic Acid: the Role of Mesophase

Simultaneous improvement of tensile strength and toughness of polylactic acid by incorporating a biodegradable core‐shell nanofiller with double polymer layers

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Synergistic preparation of a straw fiber/polylactic acid composite with high toughness and strength through interfacial compatibility enhancement and elastomer toughening

Polylacitde Nanocomposites with Better Crystallinity, Conductivity, Stiffness and Toughness Balance by Cooperation of MWCNT and Reactive Core–shell Modifier

Synergistic toughening and reinforcement of poly(lactic acid) with epoxy‐terminated hyperbranched polymers

Ethylene Copolymer Toughened Polylactic Acid Nanocomposites

Polyphosphoramide-intercalated MXene for simultaneously enhancing thermal stability, flame retardancy and mechanical properties of polylactide

Preparation of biodegradable PLA/PBAT blends with balanced toughness and strength by dynamic vulcanization process

Diisocyanate-Induced Dynamic Vulcanization of Difunctional Fatty Acids toward Mechanically Robust PLA Blends with Enhanced Luminescence Emission

Toughening polylactide using epoxy-functionalized core-shell starch nanoparticles

Preparation and Characterization of Super-Toughened PLA/CPU Blends Via One-step Dynamic Vulcanization