Abstract:The power conversion efficiency of perovskite solar cells (PSCs) has increased dramatically over the past decade, reaching more than 26%. With such high efficiency, PSCs could become one of the most important commercial alternatives to silicon‐based solar cells in the near future. However, the inconsistency of PSC operation over time is the key issue restricting its commercial application. One of the most common means of improving the overall stability of PSCs is the introduction of additives with specific functional groups to extend their useful life. Here we compare the performance and stability of MAPbI3‐based PSCs with additions of either benzoic acid (0F‐B), fluorinated benzoic acids (4‐fluorobenzoic acid (1F‐B), or 2,3,4,5,6‐pentafluorobenzoic acid (5F‐B)) in the perovskite active layer. These additives, upon interacting with the perovskite precursors, chelate onto lead ions and form hydrogen bond with methyl ammonium ions. These combined interactions result in an increased activation energy for nucleation of perovskite crystals, thereby, increased crystal size, reduced defect formation, improved electronic properties, as well as reduced ion migration. As a result, PSCs added with largest fluorine substitution of 5F‐B achieve the highest efficiency of 20.50% with a narrow PCE distribution compared to that of PSC devices added with 1F‐B (19.25%), 0F‐B (18.80%) and pristine devices (18.53%). Notably, 5F‐B added PSCs retain 80% of their initial PCE after ∽100 days humidity test (at 25 °C and 50 RH%), 30 days thermal stability test (at 85 °C in nitrogen environment), and 12 days light illumination test (continuous simulated solar radiation). Therefore, 5F‐B added PSCs synergistically achieve the highest performance and remain very stable under constant heat, humidity, or light illumination conditions for sustained energy‐harvesting applications in the future. TOC: This study focuses on the impacts of benzoic acid and its fluorinated derivatives functioning as effective passivation additives for methyl ammonium lead iodide (MAPbI3) perovskite solar cells. These additives synergistically passivate the perovskite layer, resulting in improved crystallinity and surface morphology, leading to an increased efficiency. Moreover, this approach enhances the long‐term stability of the architected solar cells, rendering them more suitable for future commercial applications. This article is protected by copyright. All rights reserved.

Stable and High‐Efficiency Perovskite Solar Cells Using Effective Additive Ytterbium Fluoride

Defect Passivation in CH3NH3PbI3 Films Using Alkali Metal Fluoride Additives for Highly Efficient Perovskite Solar Cells

Enhancing Performance and Stability of Perovskite Solar Cells with a Novel Formamidine Group Additive

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

In Situ Synthesized Low-Dimensional Perovskite for >25% Efficiency Stable MA-Free Perovskite Solar Cells

Designed Additive to Regulated Crystallization for High Performance Perovskite Solar Cell

Multifunctional Trifluoroborate Additive for Simultaneous Carrier Dynamics Governance and Defects Passivation to Boost Efficiency and Stability of Inverted Perovskite Solar Cells

Bifunctional Lewis Base‐Assisted Fabrication of High‐Quality CsPbIBr2 Perovskite for Efficient and Stable Solar Cells

Stabilizing precursor solution and controlling crystallization kinetics simultaneously for high‐performance perovskite solar cells

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

Multifunctional Organic Potassium Salt Additives as the Efficient Defect Passivator for High‐Efficiency and Stable Perovskite Solar Cells

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

A Multifunctional Additive Strategy to Stabilize the Precursor Solution and Passivate Film Defects for MA-free Perovskite Solar Cells with an Efficiency of 22.75%

Efficient and Stable Wide‐Bandgap Perovskite Solar Cells Derived from a Thermodynamic Phase‐Pure Intermediate

Collaborative Strategy of Multifunctional Groups in Trifluoroacetamide Achieving Efficient and Stable Perovskite Solar Cells

Synergistic Enhancement of Stability and Performance for Perovskite Solar Cells Using Fluorinated Benzoic Acids as Additives

Balanced-Strength Additive for High-Efficiency Stable Perovskite Solar Cells

KBF4 Additive for Alleviating Microstrain, Improving Crystallinity, and Passivating Defects in Inverted Perovskite Solar Cells

Engineering the intermedi-ate adduct phase to con-trol the crys-tallization of perovskites for efficient and stable perov-skite solar cells

Protic Amine Carboxylic Acid Ionic Liquids Additives Regulate α‐FAPbI 3 Phase Transition for High Efficiency Perovskite Solar Cells