Abstract:Organic–inorganic metal halide perovskite materials have been widely studied as the light absorber for efficient photovoltaics. However, perovskite layers with defective nature are typically prepared with an uncontrollable crystallization process, intrinsically limiting further advance in device performance, and thus require delicate manipulation of crystallization processes and defect density. Here, we demonstrate an ammonium-assisted crystallization of perovskite absorbers during a two-step deposition to fabricate efficient solar cells. Addition of ammonium iodide (NH4I) is devised to manipulate the nucleation and crystal growth of perovskite, wherein the formation and transition of intermediate x[NH4+]•[PbI3]x− enables high-quality perovskite layers with an enlarged grain and reduced defect density. As a result, the perovskite solar cells (PSCs) achieve an average efficiency of 21.36% with a champion efficiency of 22.15% and improved environmental stability over 30 days in ambient conditions with varied relative humidity. These results with addition of NH4I provide an available and ingenious way to construct high-quality perovskite layers for efficient solar cells and will advance the commercial application of perovskite-based photovoltaics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05903?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05903</a>.Experiment method; (Figure S1) SEM images, (Figure S3) absorption, (Figure S4) PL and TRPL of the perovskite layer with different concentrations of NH4I; (Figure S2) XRD and SEM images of PbI2 with or without NH4I; (Figure S5 and Table S1) photovoltaic parameter distribution of PSCs with different concentrations of NH4I; (Figure S6) PCE distribution and MPP tracking of PSCs with and without NH4I addition; (Figure S7 and Table S2) photovoltaic parameter distribution of PSCs with NH4I added on different functional layers; (Figure S8) fitted dark J–V; and (Table S3) fitted parameters of EIS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05903/suppl_file/am1c05903_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Balanced-Strength Additive for High-Efficiency Stable Perovskite Solar Cells

Defect Passivation in CH3NH3PbI3 Films Using Alkali Metal Fluoride Additives for Highly Efficient Perovskite Solar Cells

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

Hydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability

Dynamic Passivation of Perovskite Films via Gradual Additive Release for Enhanced Solar Cell Efficiency

Polymer additive assisted crystallization of perovskite films for high-performance solar cells

Multidentate Coordination Induced Crystal Growth Regulation and Trap Passivation Enables over 24% Efficiency in Perovskite Solar Cells

Manipulated Crystallization and Passivated Defects for Efficient Perovskite Solar Cells via Addition of Ammonium Iodide

Enhancing Performance and Stability of Perovskite Solar Cells with a Novel Formamidine Group Additive

A Multifunctional Additive Strategy to Stabilize the Precursor Solution and Passivate Film Defects for MA-free Perovskite Solar Cells with an Efficiency of 22.75%

In Situ Synthesized Low-Dimensional Perovskite for >25% Efficiency Stable MA-Free Perovskite Solar Cells

Multifunctional Hydroxylamine‐O‐Sulfonic Acid as Additives for Highly‐Efficient and Stable Perovskite Solar Cells

A Synergistic Effect among Multiple Functional Groups of 4‐PyAO Additive for Performance Enhancement of Tin‐Based Perovskite Solar Cells

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

Grain Boundary Chemical Anchoring via Bidirectional Active Site Additive Enables Efficient and Stable Perovskite Solar Cells

Multifunctional Organic Potassium Salt Additives as the Efficient Defect Passivator for High‐Efficiency and Stable Perovskite Solar Cells

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Passivating Defects via Retarding the Reaction Rate of FAI and PbI2 Enables Stable Perovskite Solar Cells

Interface and Bulk Engineering by Dual Sulfonates Toward High Efficiency Perovskite Solar Cells with Better Reproducibility and Stability

Using low‐cost additive to improve perovskite crystallization for efficient solar cells