Abstract:Pneumatic compact spinning is one of the most widely used compact spinning systems, which is achieved by utilizing airflow condensing equipment to condense fibers in bundle and improve yarn properties. Therefore, research on flow field in the condensing zone is always the emphasis and difficulty for pneumatic compact spinning. In this paper, the three-dimensional flow field of four different kinds of pneumatic compact spinning systems, including two types of roller-type compact spinning, namely compact spinning with a perforated drum and compact spinning with a groovy drum, and two types of lattice apron-type compact spinning, namely three-line rollers compact spinning and four-line rollers compact spinning, are investigated using the Finite Element Method. Firstly, four three-dimensional physical models of the condensing zone are built by AutoCAD software respectively according to the measured geometric parameters of practical condensing zones. Then, using ANSYS software, the numerical simulations of the three-dimensional flow field in the condensing zone for four kinds of compact spinning systems are obtained. It is shown that the flow field distribution of the condensing zone of roller-type compact spinning is different from that of lattice apron-type compact spinning and the flow field distribution of the condensing zone is significantly related to yarn properties. Comparing with roller-type compact spinning, lattice apron-type compact spinning has lower negative value of the flow velocity in the X-axis direction, a higher value in the Y-axis direction and a higher value in the Z-axis direction. Combined with yarn experiments, it is shown that the flow velocity component in the X-axis direction has an assistant condensing effect and the negative value mainly increases yarn beneficial hairiness. Roller-type compact spinning has a higher negative value and more beneficial hairiness correspondingly than lattice apron-type compact spinning; the flow velocity component in the Y-axis direction has a direct condensing effect, which is of benefit mainly for improving strength and reducing hairiness. Lattice apron-type compact spinning has a higher value and higher strength and less hairiness than roller-type compact spinning; the flow velocity component in the Z-axis direction has an assistant condensing effect, which is mainly of benefit for improving yarn evenness. Lattice apron-type compact spinning has a higher value and better evenness than roller-type compact spinning.

Progress of air flow field and fiber motion analysis in textile manufacturing process: a review

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Research progress of numerical simulation on heat and moisture transfer in porous textiles

A Numerical Simulation on Heat Transfer of Fabric Based on the Yarn Interweaved Structure

Simulation of Heat Transfer Through Woven Fabrics Based on the Fabric Geometry Model

Effects of structural parameters on air consumption and mechanical energy characteristics of airflow in the vortex spinning nozzle

Air Recirculation and Its Effect on Microfiber Spinning in Blunt-Die Melt Blowing

Modeling of textile manufacturing processes using intelligent techniques: a review

The Critical Roles of the Gas Flow in Fabricating Polymer Nanofibers: A Mini-review

Numerical simulation of the three-dimensional flow field in four pneumatic compact spinning using the Finite Element Method

Isometric fiber distribution in the roller drafting zone

Numerical investigation on the dependence of air consumption on injector parameters of the vortex spinning system for producing viscose yarns

Effect of Air-Flow Parameters on the Morphology of Nanofibrous Yarns by Blown Bubble-Spinning

An Investigation of Some Parameter Effects on the Internal Flow Characteristics in the Main Nozzle

A method to determine local aerodynamic force coefficients from fiber-resolved 3D flow simulations around a staple fiber yarn

Research Progress on Fabrication of Thermo-Regulated Fibers and Fabric

Lateral Diffusion of a Free Air Jet in Slot-Die Melt Blowing for Microfiber Whipping

Three-dimensional simulation of heat and moisture transfer in woven fabric structures

Evaluating Environmental Impact of Natural and Synthetic Fibers: A Life Cycle Assessment Approach

Research on wearing behavior of fibers in a rotor by numerical simulation and experimental verification

Experimental Study of the Airflow Field and Fiber Motion in the Melt-Blowing Process