Abstract:Polymer microfibers are ubiquitous structures across virtually all technological fields. Their applications include, for instance, filter media, tissue regeneration, wound healing and dressing, and reinforcement materials. The most effective methods for fabrication of fibrous micro and nanomaterials rely on electric fields to spin a liquid jet into an ultrafine thread that rapidly dries up forming a fiber. Continuous spinning and collection leads to formation of fiber mats. Here we report a robust yet simple approach for the massive production of liquid threads, which upon acquiring electrical charges in-flight are collected downstream in the form of fibers. The entire process takes place on-line in a single step. The liquid threads are produced through the fragmentation of a polymer solution bulk due to a turbulent interaction of a gas-liquid interface in the interior of an engineered device, a so-called Flow Blurring atomizer. The particularity of this approach consists precisely in such vigorous interaction, at the micrometer scale, which triggers a bubbly motion in the interior of the device, that is a "micro-mixing". Subsequently, the threads are passed through ionized air currents, at ambient conditions, and then stretched to sub-micrometer dimensions by electric fields. Polyvinylpyrrolidone (PVP) as well as carbon nanotubes (CNTs) or graphene oxide sheets (GOSs)-containing PVP fibers, with diameters in the range 100-900 nm, were synthesized via this approach. In the cases studied herein the method was operated at liquid flow rates (i.e. production rates) of 0.2 mL/min but it could be readily increased up to a few tens of mL/min. The method requires further improvement and optimization, nevertheless it is a promising alternative for mass production of polymer fibers.

The Critical Roles of the Gas Flow in Fabricating Polymer Nanofibers: A Mini-review

Recent Progress on Submicron Gas-Selective Polymeric Membranes

Important Mesoscale Phenomena in Gas Phase Fluidized Bed Ethylene Polymerization

Effect of Air-Flow Parameters on the Morphology of Nanofibrous Yarns by Blown Bubble-Spinning

Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

A review on polymer nanofibers by electrospinning and their applications in nanocomposites

Experimental and theoretical investigation of the fluid behavior during polymeric fiber formation with and without pressure

Progress of air flow field and fiber motion analysis in textile manufacturing process: a review

Review of the Principles, Devices, Parameters, and Applications for Centrifugal Electrospinning

Rotary jet spinning review – a potential high yield future for polymer nanofibers

Recent advances in nanofibre fabrication techniques

Spinning solution flow model in the nozzle and experimental study of nanofibers fabrication via high speed centrifugal spinning

The high-throughput atomization of polymer solutions for fiber synthesis in a single step aided with corona ionizers

Gas Flow-Assisted Alignment Of Super Long Electrospun Nanofibers

High-throughput production of kilogram-scale nanofibers by Kármán vortex solution blow spinning

Review: recent progress in high performance graphene fibers-fabrication, characterization and perspectives

Recent progress on functional electrospun polymeric nanofiber membranes

Advances in electrospun composite polymer/zeolite and geopolymer nanofibers: A comprehensive review

Gas-assisted electrospinning of high-performance ceramic fibers: Optimal design modelling and experimental results of the gas channel of the nozzle

Rational design of electrospun nanofibers for gas purification: Principles, opportunities, and challenges

A Review of the Preparation of Porous Fibers and Porous Parts by a Novel Micro-Extrusion Foaming Technique