Abstract:Pneumatic compact spinning is one of the most widely used compact spinning systems, which is achieved by utilizing airflow condensing equipment to condense fibers in bundle and improve yarn properties. Therefore, research on flow field in the condensing zone is always the emphasis and difficulty for pneumatic compact spinning. In this paper, the three-dimensional flow field of four different kinds of pneumatic compact spinning systems, including two types of roller-type compact spinning, namely compact spinning with a perforated drum and compact spinning with a groovy drum, and two types of lattice apron-type compact spinning, namely three-line rollers compact spinning and four-line rollers compact spinning, are investigated using the Finite Element Method. Firstly, four three-dimensional physical models of the condensing zone are built by AutoCAD software respectively according to the measured geometric parameters of practical condensing zones. Then, using ANSYS software, the numerical simulations of the three-dimensional flow field in the condensing zone for four kinds of compact spinning systems are obtained. It is shown that the flow field distribution of the condensing zone of roller-type compact spinning is different from that of lattice apron-type compact spinning and the flow field distribution of the condensing zone is significantly related to yarn properties. Comparing with roller-type compact spinning, lattice apron-type compact spinning has lower negative value of the flow velocity in the X-axis direction, a higher value in the Y-axis direction and a higher value in the Z-axis direction. Combined with yarn experiments, it is shown that the flow velocity component in the X-axis direction has an assistant condensing effect and the negative value mainly increases yarn beneficial hairiness. Roller-type compact spinning has a higher negative value and more beneficial hairiness correspondingly than lattice apron-type compact spinning; the flow velocity component in the Y-axis direction has a direct condensing effect, which is of benefit mainly for improving strength and reducing hairiness. Lattice apron-type compact spinning has a higher value and higher strength and less hairiness than roller-type compact spinning; the flow velocity component in the Z-axis direction has an assistant condensing effect, which is mainly of benefit for improving yarn evenness. Lattice apron-type compact spinning has a higher value and better evenness than roller-type compact spinning.

Air Recirculation and Its Effect on Microfiber Spinning in Blunt-Die Melt Blowing

Experimental Study of the Airflow Field and Fiber Motion in the Melt-Blowing Process

Lateral Diffusion of a Free Air Jet in Slot-Die Melt Blowing for Microfiber Whipping

Effect of Air-Flow Parameters on the Morphology of Nanofibrous Yarns by Blown Bubble-Spinning

Particle Image Velocimetry (PIV) Investigation of the Turbulent Airflow in Slot-Die Melt Blowing.

Effect of Direction of Blowing Air on Morphology of Nanofibers by Bubbfil Spinning

On Air Blowing Direction in the Blown Bubble-Spinning

Enhancement of fiber attenuation and filtration quality via electrostatic-induction-assisted melt blowing

Numerical simulation of the three-dimensional flow field in four pneumatic compact spinning using the Finite Element Method

Fiber spiral motion in a swirl die melt-blowing process

Numerical Study of Melt-Spinning Dynamic Parameters and Microstructure Development with Ongoing Crystallization

Multiphase CFD Modeling and Experimental Validation of Polymer and Attenuating Air Jet Interactions in Nonwoven Annular Melt Blowing

A Numerical and Experimental Study on the Effect of the Cone Angle of the Spindle in Murata Vortex Spinning Machine

Numerical simulation of a three-dimensional flow field in compact spinning with a perforated drum: Effect of a guiding device

Influence of injection air pressure on the microcapillary formation within extruded plastic films

Progress of air flow field and fiber motion analysis in textile manufacturing process: a review

Research on the process of preparing fiber filtration membrane by centrifugal blowing electrospinning technology

Numerical Simulation and Experimental Verification of Melt-Spinning Parameters' Effects on Multi-Leaf Hollow-Profiled Fiber Preparation

Investigation of Air Filter Properties of Flash-Spinning Nanofiber Non-Woven Fabric

Influence of a Meltblown Die with a Laval Airstream Channel on the Manufacturing Process of a Polymer Fiber Based on an Orthogonal Test and Simulation Analysis

Research progress in air drag mechanism and air jet flow field of melt blowing process