Abstract:With applications in cosmology, infrared astronomy and CMB survey, frequency-division multiplexing (FDM) proved to be a viable readout for transition-edge sensors (TES). We investigate the occurrence of out-of-band resonances (OBR) which could constrain the bandwidth of the FDM readout of TES bolometers. The study includes SPICE modeling of the entire setup including the cryogenic harness, LC filters, Superconducting Quantum Interference Device (SQUID) and room-temperature amplifier. Simulation results show that the long harness (for flight model) could cause multiple reflections that generate repetitive spikes in the spectrum. Peaks of the OBR are mainly due to the parasitic capacitances at the input of SQUID. Implementing a low-pass RC circuit (snubber) at the input of the SQUID dampened the OBR. As a result, the first peak only appears around 20 MHz which is a safe margin for the 1 MHz-3.8 MHz FDM in use in the prototype readout. Using a spectrum analyzer and broadband LNAs,we also measured the OBR for the prototype FDM readout in the lab up to 500 MHz. The measurement was conducted at temperatures of 50 mK and 4 K and for various biasing of the DC SQUID. It turns out that OBR are more intense at 50 mK and are caused by the harness impedance mismatch rather than the SQUID. Simulation codes and supporting materials are available at <a class="link-external link-https" href="https://github.com/githubamin/LT-Spice-Simulation-of-FDM-readout" rel="external noopener nofollow">this https URL</a>.

Impedance Matching Between SQUID and Warm Amplifier for TES Readout in TDM for the ATHENA X-IFU Instrument

Crosstalk Effects in Microwave SQUID Multiplexed TES Bolometer Readout

Simulation and Measurement of Out-of-Band Resonances for the FDM Readout of a TES Bolometer

Optimising the multiplex factor of the frequency domain multiplexed readout of the TES-based microcalorimeter imaging array for the X-IFU instrument on the Athena Xray observatory

Optimization of Time- and Code-Division-Multiplexed Readout for Athena X-IFU

Two SQUID amplifiers intended to alleviate the summing node inductance problem in multiplexed arrays of Transition Edge Sensors

Monte Carlo Comparisons to a Cryogenic Dark Matter Search Detector with low Transition-Edge-Sensor Transition Temperature

System performance of a cryogenic test-bed for the time-division multiplexing readout for NewAthena X-IFU

A Method of Measuring TES Complex ETF Response in Frequency-Domain Multiplexed Readout by Single Sideband Power Modulation

Development of frequency domain multiplexing for the X-ray Integral Field Unit (X-IFU) on the Athena

Wide-Range Bolometer with RF Readout TES

Improved Performance of TES Bolometers using Digital Feedback

Frequency domain multiplexing readout for large arrays of transition-edge sensors

Development of the superconducting detectors and read-out for the X-IFU instrument on board of the X-ray observatory Athena

System performance of a TDM test-bed with long flex harness towards the new X-IFU FPA-DM

Developments on Frequency Domain Multiplexing Readout for Large Arrays of Transition-Edge Sensor X-ray Micro-calorimeters

System Performance of a TDM Test-Bed with Long Flex Harness Toward the New X-IFU FPA-DM

Physical Neighbor Crosstalk in Time Division Multiplexed SQUID Arrays for TES Readout

A multiplexer for the ac/dc characterization of TES based bolometers and microcalorimeters