Abstract:Low-cycle fatigue (LCF) behavior of nickel-based precipitation-strengthened superalloy GH4145/SQ was investigated systematically under fully reversed total strain amplitude control conditions at 538°C in laboratory air. It was shown that the alloy exhibited a pronounced initial fatigue hardening followed by continuous fatigue softening to failure at high strain amplitudes, while at low strain amplitudes the initial hardening was followed by a well-defined saturation stage. Microstructure observations using optical and transmission-electron microscopy revealed that slip band density increased with increasing total strain amplitudes and the size of the γ′precipitates tended to reduction due to repeated shearing by the dislocations with continuous cyclic straining. The above changes in microstructures during cycling were essentially responsible for the fatigue hardening–softening behavior of the alloy. Both optical and SEM micrographs indicated that at low strain amplitudes crack propagation was basically transgranular, while at high strain amplitudes crack propagation was essentially intergranular. Bilinear behavior with a change of slope at a plastic strain amplitude of about 0.2pct was observed in cyclic stress–strain (CSS), Coffin–Manson (C–M) and plastic strain energy–life plots. A change in the number of operating slip systems and the fracture modes with the strain amplitude employed was used to explain this two-slope characteristic. In both the companion specimens test (CST) and the incremental step test (IST) methods the alloy exhibited non-masing type behavior. It was suggested that, for the first approximation, the half-life plastic strain energy could be calculated directly according to the equation without reckoning in the non-masing behavior.

Microstructure evolution of austenitic stainless steels under high-cycle-fatigue loading at deep cryogenic temperature

The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behavior of nickel-based superalloy GH4145/SQ

Multi-scale Deformation Behavior Investigation of 18cr–8ni Austenitic Steel Subjected to Low-Cycle Fatigue Loading

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Breaking the Strength-Ductility trade-off in Austenitic Stainless Steel at Cryogenic Temperatures: Mechanistic Insights

Mechanical performance and deformation mechanisms at cryogenic temperatures of 316L stainless steel processed by laser powder bed fusion: In situ neutron diffraction

Exceptional fatigue-resistant austenitic stainless steel for cryogenic applications

Microstructure and mechanical properties of austenitic stainless steel welded with Co-based wires in cryogenic temperature environment

Deformation microstructures and martensitic transformation pathways in cryogenically deformed 316L stainless steel

A Study on the Liquid Helium Temperature Tensile Property of Fe-21Cr-15Ni-5Mn-2Mo Austenitic Stainless Steel after Solution Treatment

Thermomechanical fatigue properties and microstructural damage of nitrogen alloyed 316LN stainless steel

Low cycle fatigue behavior of 316LN stainless steel: Effects of temperature, strain rate and strain amplitude

Stability of Structure and Properties of Nitrogen High-Strength Austenitic Steels Under Cyclic Thermal and Mechanical Loads

Cyclic deformation mechanism and fracture behaviour of 316L stainless steel under thermomechanical fatigue loading

Low-temperature fatigue of 316L and 316LN austenitic stainless steels

TENSILE AND LCF PROPERTIES OF AISI 316LN SS AT 300 AND 77 K

Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime