Abstract:Flexible pressure sensors based on paper have attracted considerable attention owing to their good performance, low cost, and environmental friendliness. However, effectively expanding the detection range of paper-based sensors with high sensitivities is still a challenge. Herein, we present a paper-based resistive pressure sensor with a sandwich structure consisting of two electrodes and three sensing layers. The silver nanowires were dispersed deposited on a filter paper substrate using the vacuum filtration coating method to prepare the electrode. And the sensing layer was fabricated by coating carbon nanotubes onto a mulberry paper substrate. Waterborne polyurethane was introduced in the process of preparing the sensing layers to enhance the strength of the interface between the carbon nanotubes and the mulberry paper substrate. Therefore, the designed sensor exhibits a good sensing performance by virtue of the rational structure design and proper material selection. Specifically, the rough surfaces of the sensing layers, porous conductive network of silver nanowires on the electrodes, and the multilayer stacked structure of the sensor collaboratively increase the change in the surface contact area under a pressure load, which improves the sensitivity and extends the sensing range simultaneously. Consequently, the designed sensor exhibits a high sensitivity (up to 6.26 kPa−1), wide measurement range (1000 kPa), low detection limit (~1 Pa), and excellent stability (1000 cycles). All these advantages guarantee that the sensor has potential for applications in smart wearable devices and the Internet of Things.

Silver nanowire-embedded PDMS with a multiscale structure for a highly sensitive and robust flexible pressure sensor.

Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Flexible and Highly Sensitive Pressure Sensors Based on Microstructured Carbon Nanowalls Electrodes

High sensitivity capacitive flexible pressure sensor based on PDMS double wrinkled microstructure

A Highly Sensitive and Flexible Capacitive Pressure Sensor Based on a Porous Three-Dimensional PDMS/Microsphere Composite

Highly Sensitive Pressure Sensor Based on Elastic Conductive Microspheres

A flexible pressure sensor by induced ordered nano cracks filled with multilayer graphene oxide composite film as a conductive fine-wire network for higher sensitivity

A Stretchable Pressure Sensor with Interlinked Interfaces Prepared by a Template-Free Process

Highly Sensitive, Flexible MEMS Based Pressure Sensor with Photoresist Insulation Layer.

A Novel Porous PDMS-AgNWs-PDMS (PAP)-Sponge-Based Capacitive Pressure Sensor

Vacuum Filtration-Coated Silver Electrodes Coupled with Stacked Conductive Multi-Walled Carbon Nanotubes/Mulberry Paper Sensing Layers for a Highly Sensitive and Wide-Range Flexible Pressure Sensor

A Flexible Pressure Sensor Based on Silicon Nanomembrane

Highly sensitive and flexible wearable pressure sensor with dielectric elastomer and carbon nanotube electrodes

In-situ sugar-templated porous elastomer sensor with high sensitivity for wearables

High Sensitivity and Broad Range Flexible Pressure Sensor Using Multilayered Porous PDMS/AgNP Sponge

Soft Multifunctional Porous Sponge Sensor for Pressure and Strain Using Liquid Metal/Polydimethylsiloxane with Silver-Nanowire-Coated Composite

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

Flexible AgNW/PDMS nanocomposite for strain and pressure sensing

A Flexible Piezocapacitive Pressure Sensor with Microsphere-Array Electrodes

Wearable Sensors: Micropatterned Elastic Gold‐Nanowire/Polyacrylamide Composite Hydrogels for Wearable Pressure Sensors (adv. Mater. Technol. 7/2018)

High-Performance Resistive Pressure Sensor Based on Elastic Composite Hydrogel of Silver Nanowires and Poly(ethylene glycol)