Abstract:Driven by the increasing demand for intelligent wearable electronics, pressure sensors have attracted substantial research interest. However, a pressure sensor that possesses both high sensitivity and wearable comfort for practical application in daily activities is still lacking. Herein, we design a fabric–elastomer hybrid pressure sensor that achieves a balance between sensing performance and comfort. In this well-designed sensor, medical gauze coated with silver nanowires acts as substrate to improve the comfort of the sensor, and an elastomer acts as an active sensing element to enhance the sensitivity of the sensor. The sensor exhibits exciting sensing performance, including a high sensitivity (58 kPa–1, 0–0.5 kPa), long-term endurance (>27 500 cycles), a faster response speed (<27 ms), and an ultralow limit of detection (2.7 Pa). Additionally, by adopting a prestretchable medical bandage as the substrate, the resulting sensor is insensitive to tensile strain and can accurately detect pressure stimuli under complex conditions. Then, we verify the application of the sensor in different scenarios, such as sensing tiny objects, monitoring human physiological information, and recognizing body motion. Additionally, we integrate a 4 × 4 sensor array for spatial information monitoring to provide a proof of concept for future wearable electronics, especially intelligent medical diagnostic systems.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c01455.Conductivity, digital photos, and SEM images of the conductive gauze before and after ultrasonication; photos obtained during the fabrication process; the breathability of the pressure sensor; I–V curves of the sensor under different pressure; FEA model of the pressure sensors; sensitivity of the pressure sensors under small pressure; hysteresis curve of the pressure sensor; SEM images of the conductive bandage before and after stretching; sensitivity of the pressure sensor with and without stretching; the relative change in the current versus strain; dynamic response of the pressure sensor to different frequencies; I–V curves and SEM images of the pressure sensor before and after long-term test; mechanical performance of the fabric substrate; and the comparison of sensor performance of previous reported fabric pressure sensors (PDF)Video of the fabrication process of the elastic spacers (MP4)This article has not yet been cited by other publications.

A Stretchable Pressure Sensor with Interlinked Interfaces Prepared by a Template-Free Process

A stretchable all-nanofiber iontronic pressure sensor

Silver nanowire-embedded PDMS with a multiscale structure for a highly sensitive and robust flexible pressure sensor.

Stretchable Piezoresistive Pressure Sensor Array with Sophisticated Sensitivity, Strain‐Insensitivity, and Reproducibility

Flexible and Highly Sensitive Pressure Sensors Based on Microstructured Carbon Nanowalls Electrodes

Sensitive, Stretchable, and Breathable Pressure Sensors Based on Medical Gauze Integrated with Silver Nanowires and Elastomers

A stretching-insensitive, self-powered and wearable pressure sensor

Stretchable multifunctional sensor based on porous silver nanowire/silicone rubber conductive film

Highly Sensitive, Flexible MEMS Based Pressure Sensor with Photoresist Insulation Layer.

Flexible Piezoresistive Sensor with the Microarray Structure Based on Self-Assembly of Multi-Walled Carbon Nanotubes

Highly Sensitive Pressure Sensor Based on Elastic Conductive Microspheres

Low-cost, reliable and flexible piezoresistive pressure sensors coated with single layer graphene and silver nanowires on three-dimensional polyurethane sponge

A Flexible Pressure Sensor Based on Silicon Nanomembrane

Flexible Transparent Films of Oriented Silver Nanowires for a Stretchable Strain Sensor

Dual‐Band Laser Selective Etching for Stretchable and Strain Interference‐Free Pressure Sensor Arrays

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

One-Step Process of Wrinkle Microstructured Iontronic Pressure Sensor with All Fabric Wearable Electrode

Highly conductive and stretching-insensitive films for wearable accurate pressure perception

Stretchable tactile sensor with high sensitivity and dynamic stability based on vertically aligned urchin-shaped nanoparticles

Flexible Pressure Sensors Tuned by Interface Structure Design – Numerical and Experimental Study

Highly Sensitive and Wide Linear-Response Pressure Sensors Featuring Zero Standby Power Consumption under Bending Conditions