Abstract:Gel polymer electrolyte films (GPEs) based on polyacrylonitrile (PAN) complexed with NaF salt and an Al2O3 nanofiller were prepared via solution cast method. Structural studies were performed to investigate the order of conductivity under the influence of salt and nanofillers. The prepared films were characterized using energy dispersive x-ray spectrometry (EDS) to determine the chemical composition in wt%. EDS studies reveal that PAN–NaF with Al2O3 ceramic filler decreases the degree of crystallinity with increasing concentration of the nanofiller. The UV–Vis spectrum was recorded by a Hewlett-Packard HP8452A diode array spectrometer. The structural effect of salt and nanoparticles on the conductivity was also confirmed by UV–Vis spectroscopy. The mechanical properties of the prepared polymer electrolytes were determined using a Universal Tensile Machine (Instron Model 5565, Canada) with a constant crosshead speed of 10 mm/min. The addition of nanoparticles increased both the modulus and the strength of the polymer nanocomposites. Both the tensile strength and Young’s modulus increased with increasing functionalized nanoparticle loading. The change in transition temperature caused by the incorporation of the Al2O3 nanofiller and plasticizer into the PAN+NaF complex was studied by differential scanning calorimetry (DSC) analysis. Additionally, DSC thermograms were recorded to measure the glass transition temperature and melting temperature of PAN-based electrolytes using a Mettler instrument. Conductivity studies were carried out for all the prepared polymer electrolytes to understand the conduction mechanism. The role of the ceramic phase is to reduce the melting temperature, which is ascertained from DSC. The sample containing PAN:NaF (70:30) exhibits the highest conductivity of 1.82 x 10−4 S cm−1 at room temperature (303 K) and 2.96 x 10−3 S cm−1 at 378 K. The polymer electrolytes considered in the present study exhibited an Arrhenius type of conduction. The polymer electrolyte containing 3 wt% Al2O3 nanofiller showed an ionic conductivity of 5.96 × 10−3 S cm−1. To determine transfer numbers, Wagner’s polarization method can be used. From these studies, it is observed that the conduction mechanism is predominantly due to ions. Using this (PAN–NaF– Al2O3) (70:30:3) electrolyte, a solid-state electrochemical cell was fabricated, and its discharge profiles were studied under a constant load of 100 kΩ. Finally, several cell profiles associated with this cell were evaluated and reported.

Study on ionic transport mechanism and interactions between salt and polymer chain in PAN based solid polymer electrolytes containing LiCF3SO3

An investigation on PAN–PVC–LiTFSI based polymer electrolytes system

Lithium ion conduction in polymer electrolytes based on PAN

Salt Distribution, Phase Structure, and Conductivity of Poly(ethylene Oxide)-Block-poly(n-butyl Acrylate) Block Copolymer Electrolytes with Double Conductive Phases

Structural, Optical, and Electrical Studies of PAN-Based Gel Polymer Electrolytes for Solid-State Battery Applications

Composition regulation of polyacrylonitrile-based polymer electrolytes enabling dual-interfacially stable solid-state lithium batteries

Structural and electrochemical properties of micro-porous polymer blend electrolytes based on PVdF-co-HFP-PAN for Li-ion battery applications

Synthesis and Characterization of Proton-conducting Polymer Electrolytes Based on Acrylonitrile-Styrene Sulfonic Acid Copolymer/Layered Double Hydroxides Nanocomposites

Preparation of porous polyacrylonitrile membrane-based gel polymer electrolyte for solid-state supercapacitor

Effects of Li6.75La3Zr1.75Ta0.25O12 on Chemical and Electrochemical Properties of Polyacrylonitrile-Based Solid Electrolytes

Effect of Salt Concentration on Dielectric Properties of Li-Ion Conducting Blend Polymer Electrolytes

Solid Polymer Electrolytes from Polyanionic Lithium Salts Based on the LiTFSI Anion Structure

FTIR studies of PEMA/PVdF-HFP blend polymer electrolyte system incorporated with LiCF3SO3 salt

Synergistic effects of salt concentration and polymer blend composition on the crystal phases, dielectric relaxation, and ion conduction in PVDF/PEO/LiCF3SO3 solid polymer electrolytes

Impact of functional groups on lithium salt dispersion and mobility in polymer electrolytes

Ionic conductivity and battery characteristic studies of a new PAN-based Na+ ion conducting gel polymer electrolyte system

Study of PVAc-PMMA-LiCl polymer blend electrolyte and the effect of plasticizer ethylene carbonate and nanofiller titania on PVAc-PMMA-LiCl polymer blend electrolyte

Succinonitrile-Polymer Composite Electrolytes for Li-Ion Solid-State Batteries-The Influence of Polymer Additives on Thermomechanical and Electrochemical Properties

Preparation and characterization of PAN–KI complexed gel polymer electrolytes for solid-state battery applications

Electrical Studies of Gel Polymer Electrolyte based on PAN for Electrochemical Cell Applications