Abstract:Gel polymer electrolyte films (GPEs) based on polyacrylonitrile (PAN) complexed with NaF salt and an Al2O3 nanofiller were prepared via solution cast method. Structural studies were performed to investigate the order of conductivity under the influence of salt and nanofillers. The prepared films were characterized using energy dispersive x-ray spectrometry (EDS) to determine the chemical composition in wt%. EDS studies reveal that PAN–NaF with Al2O3 ceramic filler decreases the degree of crystallinity with increasing concentration of the nanofiller. The UV–Vis spectrum was recorded by a Hewlett-Packard HP8452A diode array spectrometer. The structural effect of salt and nanoparticles on the conductivity was also confirmed by UV–Vis spectroscopy. The mechanical properties of the prepared polymer electrolytes were determined using a Universal Tensile Machine (Instron Model 5565, Canada) with a constant crosshead speed of 10 mm/min. The addition of nanoparticles increased both the modulus and the strength of the polymer nanocomposites. Both the tensile strength and Young’s modulus increased with increasing functionalized nanoparticle loading. The change in transition temperature caused by the incorporation of the Al2O3 nanofiller and plasticizer into the PAN+NaF complex was studied by differential scanning calorimetry (DSC) analysis. Additionally, DSC thermograms were recorded to measure the glass transition temperature and melting temperature of PAN-based electrolytes using a Mettler instrument. Conductivity studies were carried out for all the prepared polymer electrolytes to understand the conduction mechanism. The role of the ceramic phase is to reduce the melting temperature, which is ascertained from DSC. The sample containing PAN:NaF (70:30) exhibits the highest conductivity of 1.82 x 10−4 S cm−1 at room temperature (303 K) and 2.96 x 10−3 S cm−1 at 378 K. The polymer electrolytes considered in the present study exhibited an Arrhenius type of conduction. The polymer electrolyte containing 3 wt% Al2O3 nanofiller showed an ionic conductivity of 5.96 × 10−3 S cm−1. To determine transfer numbers, Wagner’s polarization method can be used. From these studies, it is observed that the conduction mechanism is predominantly due to ions. Using this (PAN–NaF– Al2O3) (70:30:3) electrolyte, a solid-state electrochemical cell was fabricated, and its discharge profiles were studied under a constant load of 100 kΩ. Finally, several cell profiles associated with this cell were evaluated and reported.

Ionic conductivity and battery characteristic studies of a new PAN-based Na+ ion conducting gel polymer electrolyte system

Structural and impedance analysis of PAN-based Na+ ion conducting gel polymer electrolytes for energy storage device application

Electrical Studies of Gel Polymer Electrolyte based on PAN for Electrochemical Cell Applications

Preparation and characterization of PAN–KI complexed gel polymer electrolytes for solid-state battery applications

Structural, Optical, and Electrical Studies of PAN-Based Gel Polymer Electrolytes for Solid-State Battery Applications

Electrical and Structural Characterization of PVA/PEG Polymer Blend Electrolyte Films Doped with NaClO 4

Lithium ion conduction in polymer electrolytes based on PAN

A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery

Influence of sodium salts on the phase and gelation behaviour of T1107 to be used as proposed polymer gel electrolyte

Electrospun Polyacrylonitrile (PAN)-Based Polymer Gel Electrolytes for Lithium-Ion Batteries

Synthesis and characterization of polyaniline nanofibers as cathode active material for sodium-ion battery

Enhancement of ionic conductivity and electrochemical stability of PVA/HPMC/PANI/CuSO4 gel polymer for rechargeable batteries electrolytes

An investigation on PAN–PVC–LiTFSI based polymer electrolytes system

Effect of NASCION‐Type ceramic dispersion in PAN/PVA‐based blend polymer electrolyte: A structural, thermal, and electrical study

Preparation and characterization of a semi-interpenetrating network gel polymer electrolyte

Sodium‐Ion‐Conducting Hydrogel Material: Synthesis, Characterization and Conductivity Studies

Sodium-Ion-Conducting Polymer Nanocomposite Electrolyte of TiO2/PEO/PAN Complexed with NaPF6

Electrochemical and structural characterization of polyacrylonitrile (PAN)–based gel polymer electrolytes blended with tetrabutylammonium iodide for possible application in dye-sensitized solar cells

Free-standing, high Li-ion conducting hybrid PAN/PVdF/LiClO4/Li0.5La0.5TiO3 nanocomposite solid polymer electrolytes for all-solid-state batteries

In‐situ construction of poly(tetraisopentyl acrylate) based gel polymer electrolytes with LixLa2‐xTiO3 for high energy density lithium‐metal batteries

Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt