Abstract:Gel polymer electrolyte films (GPEs) based on polyacrylonitrile (PAN) complexed with NaF salt and an Al2O3 nanofiller were prepared via solution cast method. Structural studies were performed to investigate the order of conductivity under the influence of salt and nanofillers. The prepared films were characterized using energy dispersive x-ray spectrometry (EDS) to determine the chemical composition in wt%. EDS studies reveal that PAN–NaF with Al2O3 ceramic filler decreases the degree of crystallinity with increasing concentration of the nanofiller. The UV–Vis spectrum was recorded by a Hewlett-Packard HP8452A diode array spectrometer. The structural effect of salt and nanoparticles on the conductivity was also confirmed by UV–Vis spectroscopy. The mechanical properties of the prepared polymer electrolytes were determined using a Universal Tensile Machine (Instron Model 5565, Canada) with a constant crosshead speed of 10 mm/min. The addition of nanoparticles increased both the modulus and the strength of the polymer nanocomposites. Both the tensile strength and Young’s modulus increased with increasing functionalized nanoparticle loading. The change in transition temperature caused by the incorporation of the Al2O3 nanofiller and plasticizer into the PAN+NaF complex was studied by differential scanning calorimetry (DSC) analysis. Additionally, DSC thermograms were recorded to measure the glass transition temperature and melting temperature of PAN-based electrolytes using a Mettler instrument. Conductivity studies were carried out for all the prepared polymer electrolytes to understand the conduction mechanism. The role of the ceramic phase is to reduce the melting temperature, which is ascertained from DSC. The sample containing PAN:NaF (70:30) exhibits the highest conductivity of 1.82 x 10−4 S cm−1 at room temperature (303 K) and 2.96 x 10−3 S cm−1 at 378 K. The polymer electrolytes considered in the present study exhibited an Arrhenius type of conduction. The polymer electrolyte containing 3 wt% Al2O3 nanofiller showed an ionic conductivity of 5.96 × 10−3 S cm−1. To determine transfer numbers, Wagner’s polarization method can be used. From these studies, it is observed that the conduction mechanism is predominantly due to ions. Using this (PAN–NaF– Al2O3) (70:30:3) electrolyte, a solid-state electrochemical cell was fabricated, and its discharge profiles were studied under a constant load of 100 kΩ. Finally, several cell profiles associated with this cell were evaluated and reported.

Enhancement of ionic conductivity and electrochemical stability of PVA/HPMC/PANI/CuSO4 gel polymer for rechargeable batteries electrolytes

A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery

The effect of poly(hydroxyl ethyl methacrylate) on the performance of PVDF/P(MMA-co-HEMA) hybrid gel polymer electrolytes for lithium ion battery application

Crosslinked poly(acrylonitrile–glycidyl methacrylate) as a novel gel polymer electrolyte

Gel polymer electrolyte based on PVDF-HFP:PMMA incorporated with propylene carbonate (PC) and diethyl carbonate (DEC) plasticizers : electrical, morphology, structural and electrochemical properties

High electrochemical and mechanical performance of zinc conducting-based gel polymer electrolytes

Design of Poly(Acrylonitrile)-Based Gel Electrolytes for High-Performance Lithium Ion Batteries

Structural, Optical, and Electrical Studies of PAN-Based Gel Polymer Electrolytes for Solid-State Battery Applications

Improved performance of lithium ion battery by the incorporation of novel synthesized organic-inorganic hybrid nanoparticles SiO2-poly(methyl methacrylate-co-ureidopyrimidinone) in gel polymer electrolyte based on poly (vinylidene fluoride)

High-performance gel polymer electrolytes derived from PAN-POSS/PVDF composite membranes with ionic liquid for lithium ion batteries

Gel polymer electrolyte-based on PVDF/fluorinated amphiphilic copolymer blends for high performance lithium-ion batteries

In‐situ construction of poly(tetraisopentyl acrylate) based gel polymer electrolytes with LixLa2‐xTiO3 for high energy density lithium‐metal batteries

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

Protic ionic liquid-based gel polymer electrolyte: structural and ion transport studies and its application in proton battery

Preparation of Porous, Chemically Cross-Linked, PVdF-based Gel Polymer Electrolytes for Rechargeable Lithium Batteries

Enhanced Electrochemical Properties of Gel Polymer Electrolyte with Hybrid Copolymer of Organic Palygorskite and Methyl Methacrylate

In-Situ Formed Phosphorus Modified Gel Polymer Electrolyte with Good Flame Retardancy and Cycling Stability for Rechargeable Lithium Batteries

PVDF/Palygorskite Nanowire Composite Electrolyte for 4 V Rechargeable Lithium Batteries with High Energy Density.

Dielectric and thermal features of zinc ion conducting gel polymer electrolytes (GPEs) containing PVC / PEMA blend and EMIMTFSI ionic liquid

A sodium ion conducting gel polymer electrolyte with counterbalance between 1-ethyl-3-methylimidazolium tetrafluoroborate and tetra ethylene glycol dimethyl ether for electrochemical applications