Experimental study and CFD modelling on the thermal and flow behavior of EG/water ZnO nanofluid in multiport mini channels

Tao Wen,Lin Lu,Shaojie Zhang,Hong Zhong
DOI: https://doi.org/10.1016/j.applthermaleng.2020.116089
IF: 6.4
2021-01-01
Applied Thermal Engineering
Abstract:<p>Nanofluid and mini channel are two promising approaches to enhance the heat transfer performance. The present study combined these two techniques together and investigated the heat transfer and flow behavior of ZnO ethylene glycol (EG)/water nanofluid inside two multiport mini channels with the hydraulic diameters of 1.22 mm and 1.42 mm. ZnO nanoparticles with an average diameter of 30 nm were dispersed into 40%/60% EG/water solution to get nanofluids with 0.75% and 1.5% volume concentration. The heat transfer and flow performance under various operational conditions were identified by both experiments and CFD simulation. Experimentally, it reveals that the Nusselt numbers are averagely improved by 6.7% and 9.8% for nanofluids with 0.75% and 1.5% concentration respectively. However, the friction factors are also enlarged by 4.6% and 8.6% correspondingly, which results to a various thermal performance factor ranging from 0.94 to 1.31 with the average values of 1.05 and 1.07. The decrement of channel diameter leads to greater heat transfer coefficients, pressure drop, friction factor but nearly the same Nusselt number. A new correlation is developed to predict the Nusselt number for ZnO nanofluid flow in multiport mini channels with a MARD of 9.2%. Numerically, single-phase model gives better predictions for both Nusselt number and friction factor with the average relative deviations of nearly 16% and 19.1% correspondingly. Mixture model severely overestimates the Nusselt number but shows a reasonable friction factor prediction. The present study is expected to give some guidance for the study of nanofluid in mini channels.</p>
energy & fuels,engineering, mechanical,thermodynamics,mechanics
What problem does this paper attempt to address?
This paper aims to solve the problems of heat transfer and flow behavior of nanofluids in porous micro - channels. Specifically, the research combines two techniques, nanofluids and porous micro - channels, to improve heat transfer performance. The paper pays special attention to the heat transfer and flow performance of ZnO - ethylene glycol (EG)/water nanofluids in two porous micro - channels with different hydraulic diameters (1.22 mm and 1.42 mm) under different operating conditions. Through experiments and computational fluid dynamics (CFD) simulations, the changes in Nusselt number (Nu) and friction factor of ZnO nanofluids with different concentrations (0.75% and 1.5%) were studied, and the impact of these changes on the overall thermal performance was analyzed. The main objectives of the research include: 1. **Evaluating the heat transfer enhancement effect of nanofluids**: Through experimental data, the research found that compared with pure EG/water solutions, adding ZnO nanoparticles can significantly increase the Nusselt number, thereby enhancing heat transfer performance. 2. **Analyzing the changes in the friction factor**: Although nanofluids improve heat transfer performance, they also increase the friction factor, resulting in an increase in pressure drop. 3. **Developing a new Nusselt number prediction correlation**: Based on experimental data, the research proposed a new Nusselt number prediction formula with a mean absolute relative deviation (MARD) of 9.2%. 4. **Verifying the accuracy of the CFD model**: Through numerical simulations of the single - phase model and the mixture model, the performance of these two models in predicting the Nusselt number and friction factor was studied, and it was found that the prediction results of the single - phase model are closer to the experimental data. Overall, this research provides important experimental and theoretical bases for the application of nanofluids in porous micro - channels, which is helpful for guiding future applications in compact heat exchanger design.