Abstract:Seawater electrolysis faces unique and fundamental chemical challenges, such as the suppression of highly detrimental halogen chemistries [1], that poison the current state-of-the-art anode catalyst and accelerate the degradation of the membrane [2]. The technically favored solution path is to address these issues by developing a new selective catalyst and possibly by limiting operating conditions [3]. Therefore, developing a facile and cost-effective way to design highly active, selective, and and stable seawater-splitting catalysts is of great importance for research and industry [4]. In this work, hexagonal NiFe-layered double hydroxide (LDH) nanosheets were synthesized by one-step solvothermal reactions. As synthesized NiFe-LDH catalyst exhibits high activity, selectivity, and stability towards the oxygen evolution reaction (OER) in alkaline electrolyte, delivering current densities of 10 mA/cm 2 at low overpotentials of 359 mV, with no significant degradation observed during RDE testing at constant voltage of 1.57 V for 72 hours in 1.0 M KOH electrolyte. In addition, in order to fabricate catalyst coated electrode (CCE), the nanostructured NiFe-LDH catalyst was homogeneously sprayed onto a platinized titanium porous transport layer (PTL) using an ultrasonic spray coating system. As prepared CCE is used as an anode and commercially available Raney nickel catalyst deposited on a nickel fiber frit is used as a cathode to assemble a MEA with Sustainion ® X37-50 grade T anion exchange membrane (AEM) that was tested in alkaline seawater. Employing local seawater, the AEM electrolyzer cell demonstrated stable performance for over 1000 hours at a constant current density of 300 mA cm -2 . Reference: [1] S.-C. Ke, R. Chen, G.-H. Chen, X.-L. Ma, Energy Fuels 2021, 35, 12948. [2] S. Dresp, F. Luo, R. Schmack, S. Kühl, M. Gliech, P. Strasser, Energy Environ. Sci. 2016, 9, 2020. [3] S. Dresp, F. Dionigi, S. Loos, J. Ferreira de Araujo, C. Spöri, M. Gliech, H. Dau, P. Strasser, Advanced Energy Materials 2018, 8, 1800338. [4] H. Koshikawa, H. Murase, T. Hayashi, K. Nakajima, H. Mashiko, S. Shiraishi, Y. Tsuji, ACS Catal. 2020, 10, 1886.

Water-Fed Hydroxide Exchange Membrane Electrolyzer Enabled by a Fluoride-Incorporated Nickel–Iron Oxyhydroxide Oxygen Evolution Electrode

Self-adaptively Electrochemical Reconstruction of NiFe-layered Double Hydroxide on Ni Foam for High-Performance Water Splitting

A Membrane-Free Decoupled Water Electrolyzer Operating at Simulated Fluctuating Renewables with Tri-Functional NiCo-P Electrode

Stabilizing Pure Water-Fed Anion Exchange Membrane Water Electrolyzers through Membrane-Electrode Interface Engineering

Manipulating the Electrochemical Surface Reconstruction of Nickel Foam Via Electrolyte Engineering for Efficient Oxygen Evolution Reaction at Industrial-Level Current Density

Amorphous Ni–Fe–Mo Suboxides Coupled with Ni Network as Porous Nanoplate Array on Nickel Foam: A Highly Efficient and Durable Bifunctional Electrode for Overall Water Splitting

High-Performing Anion Exchange Membrane Water Electrolysis Using Self-Supported Metal Phosphide Anode Catalysts and an Ether-Free Aromatic Polyelectrolyte

Low-Cost Self-Reconstructed High Entropy Oxide as an Ultra-Durable OER Electrocatalyst for Anion Exchange Membrane Water Electrolyzer

Nanoflake NiMn Layered Double Hydroxide Coated on Porous Membrane-like Ni-Foam for Sustainable and Efficient Electrocatalytic Oxygen Evolution

Scalable Fabrication of Highly Active and Durable Membrane Electrodes Toward Water Oxidation.

Ni-modified FeOOH integrated electrode by self-source corrosion of nickel foam for high-efficiency electrochemical water oxidation

Electronic modulation of FeOOH coupled NiFe-LDH for highly efficient alkaline water oxidation at high current density

Ultrafast Room-Temperature Synthesis of Self-Supported NiFe-Layered Double Hydroxide As Large-Current-Density Oxygen Evolution Electrocatalyst.

Boosting Oxygen Evolution Reaction of (Fe,Ni)Ooh via Defect Engineering for Anion Exchange Membrane Water Electrolysis Under Industrial Conditions

Corrosion-engineered bimetallic oxide electrode as anode for high-efficiency anion exchange membrane water electrolyzer

Immobilizing Low‐Cost Metal Nitrides in Electrochemically Reconstructed Platinum Group Metal (PGM)‐Free Oxy‐(Hydroxides) Surface for Exceptional OER Kinetics in Anion Exchange Membrane Water Electrolysis

Development of Ternary Layered Double Hydroxide Oxygen Evolution Reaction Electrocatalyst for Anion Exchange Membrane Water Electrolysis

One-Step Synthesis of Selective Nife-Layered Double Hydroxide Anode Catalyst for Highly Efficient and Stable Anion Exchange Membrane Water Electrolyzers, Operating with Seawater

Electrically Insulated Catalyst-Ionomer Anode Interfaces towards Durable Alkaline Membrane Electrolyzer

Composition‐Dependent Morphology, Structure, and Catalytical Performance of Nickel–Iron Layered Double Hydroxide as Highly‐Efficient and Stable Anode Catalyst in Anion Exchange Membrane Water Electrolysis

NiFeOx and NiFeCoOx Catalysts for Anion Exchange Membrane Water Electrolysis